Transverse Strain Aging Behaviour of Uncoated Thick Walled X70 UOE Microalloyed Steel Pipes

2018 ◽  
Author(s):  
J. B. Wiskel ◽  
J. Ma ◽  
D. G. Ivey ◽  
H. Henein
Keyword(s):  
Strain Aging ◽  
Microalloyed Steel ◽  
Microstructural Analysis ◽  
Tensile Tests ◽  
Transverse Strain ◽  
Strength Ratio ◽  
Steel Pipes ◽  
Transverse Tensile ◽  
Aging Parameter ◽  
Temperature Aging

Transverse tensile samples were extracted from the centreline position of three different compositions of uncoated thick walled microalloyed X70 UOE pipe at a location 180° from the weld. Aging heat treatments of 5, 15, and 25 minutes and temperatures of 175, 215, and 255°C were applied. Tensile tests were conducted on both the original pipe and on pre-strained samples. Microstructural analysis was undertaken using optical microscopy and scanning electron microscopy (SEM). The effects of a combined time and temperature aging parameter, pre-strain, microstructure and tensile work hardening behaviour on the pipe yield stress and yield to tensile strength ratio, is presented.

Über die mechanische Bedeutung der Holzstrahlen | The mechanical relevance of wood rays

2003 ◽  
Vol 154 (12) ◽  
pp. 498-503 ◽  
Author(s):  
Ingo Burgert
Keyword(s):  
Beech Wood ◽  
Tensile Tests ◽  
Deciduous Tree ◽  
Biological Design ◽  
Transverse Tensile ◽  
Radial Reinforcement ◽  
Radial Strength ◽  
Transverse Tensile Strength ◽  
Strength And Stiffness ◽  
Technical Solutions

Three investigations into the mechanical relevance of wood rays were combined for this article. The main objective was to show, that, apart from physiological functions, rays also significantly influence the radial strength and stiffness of wood. In the first approach twelve deciduous tree species with various proportions of fractions of rays were examined for their transverse tensile strength and stiffness. The second approach was based on the comparison of the radial mechanical properties of wood with a very high proportion of fraction of rays and beech wood with a normal volume. In these two investigations the mechanical relevance of rays could only be deduced indirectly. By isolating big rays of beech and carrying out tensile tests on the tissue, we found direct evidence for the mechanical relevance. The results are discussed with regard to their biomechanical relevance. The importance of a radial reinforcement for the wood is underlined. Moreover, the principle of multi-functionality in nature is emphasized in keeping with a possible transfer of biological design to technical solutions.

scholarly journals Influence of Hydrostatic Extrusion on the Mechanical Properties of the Model Al-Mg Alloys

2021 ◽  
Author(s):  
Aleksandra Towarek ◽  
Wojciech Jurczak ◽  
Joanna Zdunek ◽  
Mariusz Kulczyk ◽  
Jarosław Mizera
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Tensile Strength ◽  
Microstructural Analysis ◽  
Tensile Tests ◽  
Hydrostatic Extrusion ◽  
Microstructure Formation ◽  
Initial State ◽  
Degree Of Deformation ◽  
Al Mg Alloys

AbstractTwo model aluminium-magnesium alloys, containing 3 and 7.5 wt.% of Mg, were subjected to plastic deformation by means of hydrostatic extrusion (HE). Two degrees of deformation were imposed by two subsequent reductions of the diameter. Microstructural analysis and tensile tests of the materials in the initial state and after deformation were performed. For both materials, HE extrusion resulted in the deformation of the microstructure—formation of the un-equilibrium grain boundaries and partition of the grains. What is more, HE resulted in a significant increase of tensile strength and decrease of the elongation, mostly after the first degree of deformation.

Effect of Warm Deformation on Ferrite Microstructure Evolution in a Ti-Microalloyed Steel

2007 ◽  
Vol 558-559 ◽  
pp. 497-504
Author(s):  
Beitallah Eghbali
Keyword(s):  
Microstructure Evolution ◽  
Microalloyed Steel ◽  
Early Stage ◽  
Microstructural Analysis ◽  
Optical Microscope ◽  
Low Carbon ◽  
High Angle ◽  
Warm Deformation ◽  
Continuous Dynamic Recrystallization ◽  
Continuous Dynamic

Warm deformation is one of the promising hot rolling strategies for producing thin hot rolled steel strips. A better understanding of the microstructure evolution during warm deformation is important for a successful introduction of such processing into the industrial production. In the present research, the effect of deformation strain on the ferrite microstructure development in a low carbon Ti-microalloyed steel was investigated through warm torsion testing. Microstructural analysis with optical microscope and electron back-scattering diffraction was carried out on the warm deformed ferrite microstructures. The results show that at the early stage of deformation an unstable subboundaries network forms and low angle boundaries are introduced in the original grains. Then, with further straining, low angle boundaries transform into high angle boundaries and stable fine equiaxed ferrite grains form. It was considered that dynamic softening and dynamically formation of new fine ferrite grains, with high angle boundaries, were caused by continuous dynamic recrystallization of ferrite.

Influence of Continuous Annealing Conditions on the Microstructure and Mechanical Properties of a C-Mn Dual Phase Steel

2010 ◽  
Vol 638-642 ◽  
pp. 3479-3484 ◽  
Author(s):  
Roberta O. Rocha ◽  
Tulio M.F. Melo ◽  
Dagoberto Brandao Santos
Keyword(s):  
Mechanical Properties ◽  
Microstructural Analysis ◽  
Tensile Tests ◽  
Recrystallization Temperature ◽  
Continuous Annealing ◽  
Dual Phase ◽  
Heating Rates ◽  
Microstructure And Mechanical Properties ◽  
Annealing Cycle ◽  
Soaking Temperature

The influence of continuous annealing variables on the microstructure and mechanical properties of a C-Mn Dual Phase (DP) steel was studied. The annealing cycles were simulated using a Gleeble machine. Some specimens were quenched at different stages of the annealing cycle in order to evaluate the microstructural evolution during the annealing process. Tensile tests and microstrutural analysis were carried out. The results showed that high heating rates increased the final recrystallization temperature and as a consequence the microstructure obtained was refined. Austenite grain nucleation and growth were also influenced by the heating rates. Soaking temperature was the most influent variable on the mechanical properties, i. e., the yield strength increased and the tensile strength decreased with an increase in the soaking temperature. Microstructural analysis showed that not only martensite, but also bainite and martensite-retained autenite constituent (MA) were formed. Undissolved carbides were also detected by transmission electron microscopy.

Influence of Rate of Strain and Temperature on Yield Stresses of Mild Steel

1944 ◽  
Vol 11 (4) ◽  
pp. A211-A218
Author(s):  
M. J. Manjoine
Keyword(s):  
Mild Steel ◽  
Yield Stress ◽  
Strain Aging ◽  
Room Temperature ◽  
Tensile Tests ◽  
Ultimate Stress ◽  
Strain Rates ◽  
Discontinuous Yielding

Abstract This paper describes the influence of rate of strain and temperature on the yield stresses of mild steel. Tensile tests are reported for room temperature, 200, 400, and 600 C, at rates of strain which vary from 10−8 to 103 per sec. The results of these tensile tests are plotted to show more clearly the effects of strain-aging on the yield stresses and ultimate stress. The comparison of the yield stress at various strain rates permits an analysis of the influence of strain. The conditions necessary for discontinuous yielding are described and compared with test experiences.

Estimation of transverse tensile behavior of Zircaloy pressure tubes using ring-tensile test and finite element analysis

2012 ◽  
Vol 227 (6) ◽  
pp. 1177-1186 ◽  
Author(s):  
MK Samal ◽  
KS Balakrishnan ◽  
J Parashar ◽  
GP Tiwari ◽  
S Anantharaman
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Tensile Tests ◽  
Tensile Specimen ◽  
Displacement Curve ◽  
Stress Strain ◽  
Element Analysis ◽  
Transverse Tensile ◽  
Pressure Tubes ◽  
Load Displacement

Determination of transverse mechanical properties from the ring type of specimens directly machined from the nuclear reactor pressure tubes is not straightforward. It is due to the presence of combined membrane as well as bending stresses arising in the loaded condition because of the curvature of the specimen. These tubes are manufactured through a complicated process of pilgering and heat treatment and hence, the transverse properties need to be determined in the as-manufactured condition. It may not also be possible to machine small miniaturized specimen in the circumferential direction especially in the irradiated condition. In this work, we have performed ring-tensile tests on the un-irradiated ring tensile specimen using two split semi-cylindrical mandrels as the loading device. A three-dimensional finite element analysis was performed in order to determine the material true stress–strain curve by comparing experimental load–displacement data with those predicted by finite element analysis. In order to validate the methodology, miniaturized tensile specimens were machined from these tubes and tested. It was observed that the stress–strain data as obtained from ring tensile specimen could describe the load–displacement curve of the miniaturized flat tensile specimen very well. However, it was noted that the engineering stress–strain as directly obtained from the experimental load–displacement curves of the ring tensile tests were very different from that of the miniaturized specimen. This important aspect has been resolved in this work through the use of an innovative type of 3-piece loading mandrel.

scholarly journals Strain Distribution of Intact Rat Rotator Cuff Tendon-to-Bone Attachments and Attachments With Defects

2017 ◽  
Vol 139 (11) ◽  
Author(s):  
Ryan C. Locke ◽  
John M. Peloquin ◽  
Elisabeth A. Lemmon ◽  
Adrianna Szostek ◽  
Dawn M. Elliott ◽  
...  
Keyword(s):  
Area Under The Curve ◽  
Tensile Tests ◽  
Biomechanical Properties ◽  
Defect Group ◽  
Image Correlation ◽  
Uniaxial Tensile ◽  
Transverse Strain ◽  
Intact Group ◽  
Deformation Patterns ◽  
Insight Into

Abstract This study aimed to experimentally track the tissue-scale strains of the tendon–bone attachment with and without a localized defect. We hypothesized that attachments with a localized defect would develop strain concentrations and would be weaker than intact attachments. Uniaxial tensile tests and digital image correlation were performed on rat infraspinatus tendon-to-bone attachments with defects (defect group) and without defects (intact group). Biomechanical properties were calculated, and tissue-scale strain distributions were quantified for superior and inferior fibrous and calcified regions. At the macroscale, the defect group exhibited reduced stiffness (31.3±3.7 N/mm), reduced ultimate load (24.7±3.8 N), and reduced area under the curve at ultimate stress (3.7±1.5 J/m2) compared to intact attachments (42.4±4.3 N/mm, 39.3±3.7 N, and 5.6±1.4 J/m2, respectively). Transverse strain increased with increasing axial load in the fibrous region of the defect group but did not change for the intact group. Shear strain of the superior fibrous region was significantly higher in the defect group compared to intact group near yield load. This work experimentally identified that attachments may resist failure by distributing strain across the interface and that strain concentrations develop near attachment defects. By establishing the tissue-scale deformation patterns of the attachment, we gained insight into the micromechanical behavior of this interfacial tissue and bolstered our understanding of the deformation mechanisms associated with its ability to resist failure.

Dissimilar Friction Stir Welding of 2014 to 6061 Aluminum Alloys

2011 ◽  
Vol 409 ◽  
pp. 269-274 ◽  
Author(s):  
Caroline Jonckheere ◽  
Bruno de Meester ◽  
Anne Denquin ◽  
Aude Simar
Keyword(s):  
Metal Flow ◽  
High Strength ◽  
Tensile Tests ◽  
Al Alloys ◽  
Weld Nugget ◽  
Welding Parameters ◽  
Friction Stir ◽  
Initial Separation ◽  
Transverse Tensile ◽  
Dissimilar Welds

Welding cheap and ductile 6xxx Al alloys with high strength 2xxx Al alloys is desirable for instance in specific aeronautical applications. These alloys present different rheological behaviors and melting temperatures which affect the ability to produce sound dissimilar friction stir welds. Dissimilar friction stir butt welds made of 2014-T6 and 6061-T6 Al alloys were performed with various welding parameters including shifts of the tool from the initial separation between the plates to be welded and placing one alloy either on the advancing, or on the retreating side of the weld. Temperature measurements during welding, mechanical characterization (transverse tensile tests and hardness profiles) and macrographic observations were performed. Macrographies on sections perpendicular to the welding direction reveal different metal flow patterns in the weld nugget. If the 2014 alloy is placed on the advancing side of the weld, an abrupt transition between the weld nugget and the 6061 alloy is observed on macrographs leading to premature fracture in tension. Dissimilar welds are cooler on the 6061 side of the weld, i.e. the weakest side of the weld, than the corresponding 6061 similar weld, limiting the growth of the hardening precipitates. This leads thus to higher strength of the dissimilar welds. Dissimilar welds with the weld center shifted towards the 2014 alloy present lower temperatures than unshifted welds on the 6061 side of the weld, also leading to higher strength.

Effects of Strain Rate on Dynamic Strain Aging of SA508-III Steel

2014 ◽  
Vol 788 ◽  
pp. 334-339 ◽  
Author(s):  
Dan Yuan ◽  
Lei Wang ◽  
Yang Liu ◽  
Xiu Song ◽  
Jia Hua Liu
Keyword(s):  
Strain Rate ◽  
Dynamic Strain Aging ◽  
Strain Aging ◽  
Cell Structure ◽  
Tensile Tests ◽  
Dislocation Cell ◽  
Strain Rate Range ◽  
Dynamic Strain ◽  
Strain Rates ◽  
Reduction Of Area

The dynamic strain aging (DSA) behavior of SA508-III steel was evaluated through tensile tests with different strain rates from 10-4 to 10-1s-1 at 350°C. The OM, SEM and TEM were carried out to observe the microstructures and fracture morphologies of the steel. The results show that the serrated flows appear in the stress-strain curves when the strain rate is between 10-3~10-2s-1, indicating that DSA occurs. Under the strain rate range, the tensile strength increases and the elongation and the reduction of area decrease. However, the fracture surface of the steel after tensile tests is still ductile. DSA in SA508-III steel at the strain rates from10-3 to 10-2s-1 is mainly caused by the interaction between the internal solute atoms and dislocations, which leads to the dislocations multiplication and the formation of sub-grain boundaries and dislocation cell structure.

Sign in / Sign up

Export Citation Format

Share Document