Long Term Structural Integrity Considerations for Abandoned Pipelines

2016 ◽  
Author(s):  
Shane Finneran ◽  
T. J. Prewitt ◽  
Joel Kaufman
Keyword(s):  
Transmission Lines ◽  
Structural Integrity ◽  
Large Diameter ◽  
Metal Loss ◽  
Finite Element Analyses ◽  
Load Bearing Capacity ◽  
Soil Subsidence ◽  
Structural Capacity

There has been increasing interest across the industry to better understand the possible long term risks associated with out of service pipelines. In Canada, the Canadian Energy Pipeline Association (CEPA), Petroleum Technology Alliance of Canada (PTAC), and the National Energy Board (NEB), have undertaken multiple studies to identify and assess the threats related to pipeline abandonment. [1][2][3] The primary hazards typically identified across industry for pipeline abandonment are associated with long term corrosion degradation, potential for creation of water conduits, possible environmental impacts, and potential for pipeline collapse and associated soil subsidence. Unfortunately, little guidance is presently available to the industry for determining remaining structural capacity of a heavily corroded pipeline to establish likelihood, and possible timeline, of collapse, nor for determining possible subsidence magnitudes associated with large diameter transmission lines. This paper presents a technical case study for an assessment approximating the remaining strength of an abandoned pipeline subject to long term corrosion degradation, considering both general metal loss, and randomized pitting and perforation growth. The work presented used a combination of finite element analyses, and existing industry models for determining load bearing capacity of an abandoned pipeline under varying levels of degradation.

scholarly journals Optimized Design of Modular Multilevel DC De-Icer for High Voltage Transmission Lines

Electronics ◽  
2018 ◽  
Vol 7 (9) ◽  
pp. 204 ◽  
Author(s):  
Jiazheng Lu ◽  
Qingjun Huang ◽  
Xinguo Mao ◽  
Yanjun Tan ◽  
Siguo Zhu ◽  
...  
Keyword(s):  
Transmission Lines ◽  
Engineering Application ◽  
Optimized Design ◽  
Multilevel Converter ◽  
Power Outage ◽  
Total Cost ◽  
Technical Performance ◽  
Promising Solution

Ice covering on overhead transmission lines would cause damage to transmission system and long-term power outage. Among various de-icing devices, a modular multilevel converter based direct-current (DC)de-icer (MMC-DDI) is recognized as a promising solution due to its excellent technical performance. Its principle feasibility has been well studied, but only a small amount of literature discusses its economy or hardware optimization. To fill this gap, this paper presents a quantitative analysis and calculation on the converter characteristics of MMC-DDI. It reveals that, for a given DC de-icing requirement, the converter rating varies greatly with its alternating-current (AC) -side voltage, and it sometimes far exceeds the melting power. To reduce converter rating and improve its economy, an optimized configuration is proposed in which a proper transformer should be configured on the input AC-side of converter under certain conditions. This configuration is verified in an MMC-DDI for a 500 kV transmission line as a case study. The result shows, in the case of outputting the same de-icing characteristics, the optimized converter is reduced from 151 MVA to 68 MVA, and the total cost of the MMC-DDI system is reduced by 48%. This conclusion is conducive to the design optimization of multilevel DC de-icer and then to its engineering application.

scholarly journals Optimized Design of Modular Multilevel DC De-Icer for High Voltage Transmission Lines

2018 ◽  
Author(s):  
Jiazheng Lu ◽  
Qingjun Huang ◽  
Xinguo Mao ◽  
Yanjun Tan ◽  
Siguo Zhu ◽  
...  
Keyword(s):  
High Voltage ◽  
Transmission Lines ◽  
Engineering Application ◽  
Optimized Design ◽  
Power Outage ◽  
Technical Performance ◽  
Promising Solution ◽  
High Voltage Transmission

Ice covering on overhead transmission lines would cause damage to transmission system and long-term power outage. Among various de-icing devices, modular multilevel converter (MMC) based DC de-icer (MMC-DDI) is recognized as a promising solution due to its excellent technical performance. Its principle feasibility has been well studied, but few literature discuss its economy or hardware optimization, thus the designed MMC-DDI for high voltage transmission lines is usually too large and too expensive for engineering applications. To fill this gap, this paper presents a quantitative analysis on the converter characteristics of MMC-DDI, and calculates the minimal converter rating and its influencing factors. It reals that, for a given de-icing requirement, the converter rating varies greatly with its AC-side voltage. Then an optimization configuration is proposed to reduce the converter rating and improve its economy. The proposed configuration is verified in a MMC-DDI for a 500kV transmission line as a case study. The result shows, in the case of outputting same de-icing characteristics, the optimized converter rating is reduced from 151 MVA to 68 MVA, and total cost of MMC-DDI is reduced by 48%. This analysis and conclusion are conductive to the optimized design of multilevel DC de-icer, then to its engineering application.

A Structural Integrity Assessment of a Nuclear Boiler Superheater Bifurcation at High Temperature

2018 ◽  
Author(s):  
Brahim Nadri ◽  
Robert X. Wang
Keyword(s):  
Fatigue Crack ◽  
Crack Initiation ◽  
Structural Integrity ◽  
Fatigue Crack Initiation ◽  
Metal Loss ◽  
Term Operation ◽  
Creep Fatigue ◽  
Safety Case ◽  
Creep Fatigue Crack

Steam generating boilers in gas cooled nuclear reactors in the UK operate at high temperatures and some of them have been in service for more than 30 years and are now facing the challenges from long term operation extension demand. The tubular components experience surface metal losses due to exposure to oxidation and corrosive environment and as a result, some tubes suffer from restricted flow which may lead to an increased creep-fatigue crack initiation damage. To maintain or recover boiler heat transfer efficiency, internal chemical cleaning of selected boiler tubes is carried out, which introduces additional metal loss in the tube wall, weakening its load bearing capacity. Some boiler components are subject to high temperature, pressure and mechanical loadings in large number of operating cycles through life, introducing creep in addition to cyclic fatigue damage. In support of an operational safety case and plant long term operation extension requirements, structural integrity assessments have been carried out on a critical boiler component — bifurcation, taking into account tube wall metal loss for extended long term services, including the effects of possible future chemical cleaning operations. This paper presents the finite element analyses and R5 Volume 2/3 assessment work carried out for the structural integrity substantiation of a stainless steel boiler tube bifurcation. The bifurcation is a tubular component subject to significant applied displacement due to long range thermal expansion of the neighbouring components. The initial study following normal industry practice using a decoupled analysis approach showed that the strain ranges obtained would exceed the creep-fatigue crack initiation capacity and plastic ratchetting would occur which would lead to short term, incremental plastic collapse, hence a safety case could not be made. To meet the challenge, the analysis and assessment processes have been examined. A coupled FE analysis approach was used to remove the pessimism associated with the decoupled analysis approach. This approach captures the displacement-controlled nature of the system loads and allows a more realistic assessment. In addition, the plant life has been divided into a number of assessment periods such that the more realistic metal loss appropriate for each period could be used. Furthermore, segregated temperature zones have been considered in the assessment, leading to a significant reduction in the creep-fatigue crack initiation damage and a satisfactory extended long term operation safety case.

Fatigue Variation in Ships due to the Variability of Environmental Loads

2012 ◽  
Author(s):  
Wengang Mao ◽  
Zhiyuan Li ◽  
Jonas W. Ringsberg ◽  
Igor Rychlik
Keyword(s):  
Fatigue Damage ◽  
Structural Integrity ◽  
Structural Strength ◽  
Fatigue Cracks ◽  
Maritime Industry ◽  
Fatigue Design ◽  
Routing Design ◽  
Potential Use

The design and analysis of structural strength against fatigue failure always includes large uncertainties. It is crucial to understand and identify the most important uncertainties that affect the performance, functionality and service life of an engineering structure — in particular when it comes to the safety aspect, which may involve the risk of loss of human lives. In maritime industry, it is known that due to various sources of uncertainties in ship fatigue design, some ships may survive (the occurrence of fatigue cracks which may endanger the structural integrity) much longer than their designed life, while other ships develop fatigue cracks far too early. The current investigation presents some of the most important uncertainties and their effects on the accuracy of fatigue assessments in a container vessel. The study emphasizes the analysis of the fatigue damage variation when the ship is sailing on different routings between two ports. A fatigue model developed by the authors for ship fatigue routing application is employed to estimate the long term fatigue damage. In this model, only a few parameters, i.e. the encountered significant wave height and operational profiles, are needed. The procedure of using this model for a ship fatigue routing design is described in detail. Its potential use and benefits are demonstrated in a case study by a 2,800 TEU container ship using both full-scale measurements and hindcast wave data. It is shown that awareness and careful fatigue routing design can reduce fatigue damage significantly by up to 50%!

Caregivers' Perceptions of Speech-Language Pathologist Talk About Child Language and Literacy Disorders

2020 ◽  
Vol 29 (4) ◽  
pp. 2049-2067
Author(s):  
Karmen L. Porter ◽  
Janna B. Oetting ◽  
Loretta Pecchioni
Keyword(s):  
Language And Literacy ◽  
Collective Case Study ◽  
Study Approach ◽  
School Aged Children ◽  
Speech Language Pathologist ◽  
Therapy Goals ◽  
Semistructured Interviews ◽  
Types Of Information

Purpose This study examined caregiver perceptions of their child's language and literacy disorder as influenced by communications with their speech-language pathologist. Method The participants were 12 caregivers of 10 school-aged children with language and literacy disorders. Employing qualitative methods, a collective case study approach was utilized in which the caregiver(s) of each child represented one case. The data came from semistructured interviews, codes emerged directly from the caregivers' responses during the interviews, and multiple coding passes using ATLAS.ti software were made until themes were evident. These themes were then further validated by conducting clinical file reviews and follow-up interviews with the caregivers. Results Caregivers' comments focused on the types of information received or not received, as well as the clarity of the information. This included information regarding their child's diagnosis, the long-term consequences of their child's disorder, and the connection between language and reading. Although caregivers were adept at describing their child's difficulties and therapy goals/objectives, their comments indicated that they struggled to understand their child's disorder in a way that was meaningful to them and their child. Conclusions The findings showed the value caregivers place on receiving clear and timely diagnostic information, as well as the complexity associated with caregivers' understanding of language and literacy disorders. The findings are discussed in terms of changes that could be made in clinical practice to better support children with language and literacy disorders and their families.

Interrelationships between municipal spatial policy strategy and airport operation and development. Lodz Airport case study

2018 ◽  
Vol 59 (1) ◽  
pp. 65-79
Author(s):  
Katarzyna Nikorowicz-Zatorska
Keyword(s):  
Land Use ◽  
Urban Planning ◽  
Cultural Development ◽  
The Other ◽  
Local Authorities ◽  
Spatial Management ◽  
The One ◽  
Surrounding Areas

Abstract The present paper focuses on spatial management regulations in order to carry out investment in the field of airport facilities. The construction, upgrades, and maintenance of airports falls within the area of responsibility of local authorities. This task poses a great challenge in terms of organisation and finances. On the one hand, an active airport is a municipal landmark and drives local economic, social and cultural development, and on the other, the scale of investment often exceeds the capabilities of local authorities. The immediate environment of the airport determines its final use and prosperity. The objective of the paper is to review legislation that affects airports and the surrounding communities. The process of urban planning in Lodz and surrounding areas will be presented as a background to the problem of land use management in the vicinity of the airport. This paper seeks to address the following questions: if and how airports have affected urban planning in Lodz, does the land use around the airport prevent the development of Lodz Airport, and how has the situation changed over the time? It can be assumed that as a result of lack of experience, land resources and size of investments on one hand and legislative dissonance and peculiar practices on the other, aviation infrastructure in Lodz is designed to meet temporary needs and is characterised by achieving short-term goals. Cyclical problems are solved in an intermittent manner and involve all the municipal resources, so there’s little left to secure long-term investments.

Sign in / Sign up

Export Citation Format

Share Document