Inspection and Prioritization Methods for Small Diameter Auxiliary Piping

2014 ◽  
Author(s):  
Adam Pecush ◽  
Mark McTavish ◽  
Brian Ellestad
Keyword(s):  
Oil And Gas ◽  
Large Diameter ◽  
Small Diameter ◽  
Oil And Gas Industry ◽  
Lessons Learned ◽  
Pipeline System ◽  
Gas Industry ◽  
Model Sets ◽  
Pump Stations ◽  
And Storage

To serve the pumping and storage needs of its customers; Enbridge operates more than 25 terminals and 150 pump stations across North America. In each of these facilities, small diameter (NPS 6 and smaller) piping is used in auxiliary systems including instrumentation, measurement, and product re-injection. Traditionally, in the design of facilities, this small piping has received less attention than large diameter process lines and, during construction, has typically been field run based on standard installation details. This, in conjunction with 65 years of changing design and construction philosophies, as well as asset acquisitions, has resulted in a wide variety of installation configurations across the Enbridge liquids system. The Small Diameter Piping Program in the Facilities Integrity group centrally manages the integrity of all small diameter auxiliary piping across the Enbridge liquids system. Historically, the management and remediation of small diameter systems has been based on addressing specific installation types identified through incident investigations. While generally effective at minimizing re-occurrence, this approach has been limited in its ability to proactively identify installations that should be addressed. In support of our goal of zero incidents, Enbridge has developed a proactive methodology for the inspection and prioritization of small diameter auxiliary piping. Installation types are evaluated on their susceptibility to specific damage mechanisms. An inspection and prioritization model was developed through the combination of internal lessons learned and prioritization methodologies outlined in industry publications, specifically those from the overseas oil and gas industry. This model, sets a standardized process to assign a likelihood of failure (LOF) score to individual small diameter installations of specific types and/or functions. Presently, likelihood of failure scores are used to identify installations requiring remediation, and to most effectively prioritize system-wide remediation activities. Over time, these scores will also be used to demonstrate an overall reduction in the likelihood of failure for small diameter piping in the Enbridge liquids pipeline system.

Subsea Cable Stability on Rocky Seabeds: Comparison of Field Observations Against Conventional and Novel Design Methods

2018 ◽  
Author(s):  
Terry Griffiths ◽  
Scott Draper ◽  
Liang Cheng ◽  
Feifei Tong ◽  
Antonino Fogliani ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Power Transmission ◽  
Small Diameter ◽  
Oil And Gas Industry ◽  
Operational Reliability ◽  
Design Methods ◽  
Gas Industry ◽  
Integrity Management ◽  
Tidal Stream ◽  
Almost All

As offshore renewable energy projects progress from concept demonstration to commercial-scale developments there is a need for improved approaches beyond conventional cable engineering design methods that have evolved from larger diameter pipelines for the oil and gas industry. New approaches are needed to capture the relevant physics for small diameter cables on rocky seabeds to reduce the costs and risks of power transmission and increase operational reliability. This paper reports on subsea cables that MeyGen installed for Phase 1a of the Pentland Firth Inner Sound tidal stream energy project. These cables are located on rocky seabeds in an area where severe metocean conditions occur. ROV field observation of these cables shows them to be stable on the seabed with little or no movement occurring over almost all of the cable routes, despite conventional engineering methods predicting significant dynamic movement. We cite recent research undertaken by the University of Western Australia (UWA) to more accurately assess the hydrodynamic forces and geotechnical interaction of cables on rocky seabeds. We quantify the conformity between the cables and the undulating rocky seabed, and the distributions of cable-seabed contact and spanning via simulations of the centimetric-scale seabed bathymetry. This analysis leads to calculated profiles of lift, drag and seabed friction along the cable, which show that all of these load and reaction components are modelled in an over-conservative way by conventional pipeline engineering techniques. Overall, our analysis highlights that current cable stability design can be unnecessarily conservative on rocky seabeds. Our work foreshadows a new design approach that offers more efficient cable design to reduce project capex and enhance through-life integrity management.

Lessons Learned in Developing Human Capital for the Oil and Gas Industry in Kazakhstan

2021 ◽  
Vol 73 (08) ◽  
pp. 60-61
Author(s):  
Chris Carpenter
Keyword(s):  
Human Capital ◽  
Human Resource Development ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Technical Conference ◽  
Program Improvement ◽  
Lessons Learned ◽  
Colorado School ◽  
Gas Industry ◽  
Successful Model

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 201272, “Lessons Learned in Developing Human Capital for the Oil and Gas Industry in Kazakhstan,” by Zhassulan Dairov, SPE, KIMEP University and Satbayev University; Murat Syzdykov, SPE, Satbayev University; and Jennifer Miskimins, SPE, Colorado School of Mines, prepared for the 2020 SPE Annual Technical Conference and Exhibition, originally scheduled to be held in Denver, Colorado, 5–7 October. The paper has not been peer reviewed. The World Economic Forum’s (WEF) Human Capital initiative has been implemented at Satbayev University (SU), Almaty, Kazakhstan, during the last 2 years. Participating in this effort are Chevron, Eni, Shell, and the Colorado School of Mines (Mines). The complete paper assesses the effectiveness of project components, such as industry guest lectures, summer internships, and program improvement, and provides lessons learned for human-resource-development initiatives. Introduction In most cases, the industry/ university alliance is intermittent, short-term, and underdeveloped. The engagement of three stakeholders, such as government, industry, and the university, is the most-successful model of joint performance. This approach allows all participants to create competitive advantages in the achievement of common objectives. Moreover, the role of governmental agencies is critical alongside professional organizations in facilitating such cooperation.

scholarly journals Effect of Gain in Soil Friction on the Walking Rate of Subsea Pipelines

2019 ◽  
Vol 7 (11) ◽  
pp. 401 ◽  
Author(s):  
Zhaohui Hong ◽  
Dengfeng Fu ◽  
Wenbin Liu ◽  
Zefeng Zhou ◽  
Yue Yan ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Pipeline System ◽  
Gas Industry ◽  
Steel Catenary Riser ◽  
Wide Range ◽  
Offshore Oil And Gas ◽  
Subsea Pipelines ◽  
Offshore Oil ◽  
Pipeline Design

Subsea pipelines are commonly employed in the offshore oil and gas industry to transport high-pressure and high-temperature (HPHT) hydrocarbons. The phenomenon of pipeline walking is a topic that has drawn a great deal of attention, and is related to the on-bottom stability of the pipeline, such as directional accumulation with respect to axial movement, which can threaten the security of the entire pipeline system. An accurate assessment of pipeline walking is therefore necessary for offshore pipeline design. This paper reports a comprehensive suite of numerical analyses investigating the performance of pipeline walking, with a focus on the effect of increasing axial soil resistance on walking rates. Three walking-driven modes (steel catenary riser (SCR) tension, downslope, and thermal transient) are considered, covering a wide range of influential parameters. The variation in walking rate with respect to the effect of increased soil friction is well reflected in the development of the effective axial force (EAF) profile. A method based on the previous analytical solution is proposed for predicting the accumulated walking rates throughout the entire service life, where the concept of equivalent soil friction is adopted.

Effectiveness of Ultraviolet Light For Mitigating Risk of Microbiologically Influenced Corrosion in Steel Pipeline

2015 ◽  
Vol 74 (4) ◽  
Author(s):  
M. K. F. M. Ali ◽  
N. Md. Noor ◽  
N. Yahaya ◽  
A. A. Bakar ◽  
M. Ismail
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Microbiologically Influenced Corrosion ◽  
Metal Loss ◽  
Desulfovibrio Vulgaris ◽  
Pipeline System ◽  
Long Distance ◽  
Gas Industry ◽  
Internal Corrosion ◽  
Steel Pipeline

Pipelines play an extremely important role in the transportation of gases and liquids over long distance throughout the world. Internal corrosion due to microbiologically influenced corrosion (MIC) is one of the major integrity problems in oil and gas industry and is responsible for most of the internal corrosion in transportation pipelines. The presence of microorganisms such as sulfate reducing bacteria (SRB) in pipeline system has raised deep concern within the oil and gas industry. Biocide treatment and cathodic protection are commonly used to control MIC. However, the solution is too expensive and may create environmental problems by being too corrosive. Recently, Ultraviolet (UV) as one of the benign techniques to enhance mitigation of MIC risk in pipeline system has gained interest among researchers. An amount of 100 ml of modified Baar’s medium and 5 ml of Desulfovibrio vulgaris (strain 7577) seeds was grown in 125 ml anaerobic vials with carbon steel grade API 5L-X70 coupons at the optimum temperature of 37°C and pH 9.5 for fifteen days. This was then followed by exposing the medium to UV for one hour. Results from present study showed that UV radiation has the ability to disinfect bacteria, hence minimizing the risk of metal loss due to corrosion in steel pipeline. 

Case Histories of the Resolution of Bolted Joint Leakage in the Oil and Gas Industry

2016 ◽  
Author(s):  
Warren Brown ◽  
Geoff Evans ◽  
Lorna Carpenter
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Lessons Learned ◽  
Bolted Joint ◽  
Case Histories ◽  
Gas Industry ◽  
Root Cause ◽  
The Past ◽  
Cause Of Failure ◽  
Assessment Techniques

Over the course of the past 20 years, methods have been developed for assessing the probability and root cause of bolted joint leakage based on sound engineering assessment techniques. Those methods were incorporated, in part, into ASME PCC-1-2010 Appendix O [7] and provide the only published standard method for establishing bolted joint assembly bolt load. As detailed in previous papers, the method can also be used for troubleshooting joint leakage. This paper addresses a series of actual joint leakage cases, outlines the analysis performed to determine root cause of failure and the actions taken to successfully eliminate future incidents of failure (lessons learned).

Additive Manufacturing in the Oil and Gas Industry Overview

2020 ◽  
Author(s):  
Carlo De Bernardi
Keyword(s):  
Additive Manufacturing ◽  
Inventory Management ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Lessons Learned ◽  
Current Status ◽  
Gas Industry ◽  
Standardization Process ◽  
Process Feedback ◽  
Different Levels

Abstract The API 20S Standard is designed to play a crucial role in leveraging Additive Manufacturing (AM) to foster innovation in the oil and gas industry. The paper, in association with the standard, will facilitate the understanding of how AM will enable equipment design improvements, faster prototyping, and better inventory management. By way of discussing the progress, challenges, and lessons learned from the standardization process, the paper aims to encourage a safer, broader, and faster adoption of AM technologies in the mainstream oil and gas applications. The paper will summarize the streamlining process, feedback from the API 20S task group, and current status of the standardization efforts. Additionally, upcoming challenges and the potential for the oil and gas industry industries to contribute to the standard will be summarized. The paper will also showcase a novel tiered approach (Additive Manufacturing Specification Levels) to allow the users of the document to match different levels of criticality.

Manufacture and Qualification of Small Diameter / Thickwall Reelable DSAWL Linepipe

2016 ◽  
Author(s):  
Stephen Hall ◽  
Martin Connelly ◽  
Graham Alderton ◽  
Andrew Hill ◽  
Shuwen Wen
Keyword(s):  
Oil And Gas ◽  
Small Diameter ◽  
Oil And Gas Industry ◽  
Fe Model ◽  
External Diameter ◽  
Gas Industry ◽  
The North ◽  
Innovative Thinking ◽  
The North Sea ◽  
The Cost

Tough market conditions have seen the price of oil drop which with the subsequent uncertainty surrounding the industry have seen the oil and gas industry concentrate on reducing the cost of designing, installing and operating pipelines. A critical process for the industry is the procurement, manufacture and installation of appropriate linepipe. The method of installation is often dictated by the pipe size and the water depth that the pipe is to be laid in, however there are times when the choice of lay method is due to vessel availability and relative costs for each technique. In early 2014, Tata Steel successfully manufactured and delivered 16"OD × 0.875”WT X65 submerged arc welded longitudinal (SAWL) linepipe for installation via the reel lay method. Notable features about this fact were the size, which represents the thickest 16” external diameter UOE pipe yet delivered by Tata Steel, and that this was to be the first UOE pipe to be installed by the reel lay method in the North Sea. The ability to manufacture small diameter thickwall linepipe was only possible due to recent operational developments including an established tooling programme and a fully validated Finite Element (FE) model of the UOE process, along with years of experience of integrating these tools into the manufacturing process. This paper discusses the manufacturing challenges for small diameter thickwall linepipe, and how with the aid of modelling tools, innovative thinking and previous experience in supplying small diameter thickwall linepipe into two reel-installed projects, the pipe was manufactured and delivered with the properties shown to be compliant with DNV OS-F101 Supplementary Requirement P.

scholarly journals Storage, Handling and Safety Procedure for Fuel in Oil & Gas Industry

2019 ◽  
Vol 9 (1) ◽  
pp. 1031-1032
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Vital Role ◽  
Gas Industry ◽  
Article Deal ◽  
Safety Precaution ◽  
The Government ◽  
Oil Gas ◽  
And Storage ◽  
Safety Procedures

After Finding the oil & gas occurrences in the subsurface using various methods and tools that were available in Upstream Oil and Gas Industry. Further reaching the reservoir and taking out the Oil & Gas from those to the surface the fuel have to transport and store to get purify for supply to the required user. Here the Midstream peoples plays a vital role in it. The drilled Oil and Gas have to transport from the occurrence to the destination Refinery so it have to be planned well and many safety procedure have to be done to avoid any problem in those transportation and after transporting to the destination it must be maintained in perfect temperature condition and perfect storage tanks either above the ground or the underground .Again there are some safety procedures to be followed which were approved by the Government safety norms. This article deal about the process and procedures in transporting and storage of fuels from upstream to midstream to downstream .Also about the safety precaution and procedure to be followed to have a safe storage and handling.

Sign in / Sign up

Export Citation Format

Share Document