Mechanical Properties of 3D Printed Biomimicked Composites

2018 ◽  
Author(s):  
Seyed M. Allameh ◽  
Roger Miller ◽  
Hadi Allameh
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Soft Materials ◽  
Structural Composites ◽  
Home Building ◽  
Complex Shapes ◽  
3D Printed ◽  
Bend Tests ◽  
Point Bend

Additive manufacturing technology has significantly matured over the last two decades. Recent progress in 3D printing has made it an attractive choice for fabricating complex shapes out of select materials possessing desirable properties at small and large scales. The application of biomimetics to the fabrication of structural composites has been shown to enhance their toughness and dynamic shear resistance. Building homes from bioinspired composites is possible if the process is automated. This can be achieved through additive manufacturing where layers of hard and soft materials can be deposited by 3D printing. This study examines mechanical properties of reinforced concrete fabricated by 3D printing. Preliminary results of 4-point bend tests are presented and the implications of 3D-printed home building on current conventional construction practices are discussed.

scholarly journals DLP 3D Printing Meets Lignocellulosic Biopolymers: Carboxymethyl Cellulose Inks for 3D Biocompatible Hydrogels

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1655 ◽  
Author(s):  
Giuseppe Melilli ◽  
Irene Carmagnola ◽  
Chiara Tonda-Turo ◽  
Fabrizio Pirri ◽  
Gianluca Ciardelli ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Carboxymethyl Cellulose ◽  
Biomedical Applications ◽  
Digital Light Processing ◽  
Chemically Modified ◽  
Significant Step ◽  
3D Printed ◽  
Biomedical Field

The development of new bio-based inks is a stringent request for the expansion of additive manufacturing towards the development of 3D-printed biocompatible hydrogels. Herein, methacrylated carboxymethyl cellulose (M-CMC) is investigated as a bio-based photocurable ink for digital light processing (DLP) 3D printing. CMC is chemically modified using methacrylic anhydride. Successful methacrylation is confirmed by 1H NMR and FTIR spectroscopy. Aqueous formulations based on M-CMC/lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) photoinitiator and M-CMC/Dulbecco’s Modified Eagle Medium (DMEM)/LAP show high photoreactivity upon UV irradiation as confirmed by photorheology and FTIR. The same formulations can be easily 3D-printed through a DLP apparatus to produce 3D shaped hydrogels with excellent swelling ability and mechanical properties. Envisaging the application of the hydrogels in the biomedical field, cytotoxicity is also evaluated. The light-induced printing of cellulose-based hydrogels represents a significant step forward in the production of new DLP inks suitable for biomedical applications.

scholarly journals Property Analysis of Photo-Polymerization-Type 3D-Printed Structures Based on Multi-Composite Materials

2021 ◽  
Vol 11 (18) ◽  
pp. 8545
Author(s):  
So-Ree Hwang ◽  
Min-Soo Park
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Composite Materials ◽  
3D Printing ◽  
Bending Test ◽  
3D Printer ◽  
Complex Structures ◽  
Photo Polymerization ◽  
Anisotropic Structures ◽  
3D Printed

Additive manufacturing, commonly called 3D printing, has been studied extensively because it can be used to fabricate complex structures; however, polymer-based 3D printing has limitations in terms of implementing certain functionalities, so it is limited in the production of conceptual prototypes. As such, polymer-based composites and multi-material 3D printing are being studied as alternatives. In this study, a DLP 3D printer capable of printing multiple composite materials was fabricated using a movable separator and structures with various properties were fabricated by selectively printing two composite materials. After the specimen was fabricated based on the ASTM, the basic mechanical properties of the structure were compared through a 3-point bending test and a ball rebound test. Through this, it was shown that structures with various mechanical properties can be fabricated using the proposed movable-separator-based DLP process. In addition, it was shown that this process can be used to fabricate anisotropic structures, whose properties vary depending on the direction of the force applied to the structure. By fabricating multi-joint grippers with varying levels of flexibility, it was shown that the proposed process can be applied in the fabrication of soft robots as well.

scholarly journals Comparison between Tests and Simulations Regarding Bending Resistance of 3D Printed PLA Structures

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4371
Author(s):  
Dorin-Ioan Catana ◽  
Mihai-Alin Pop ◽  
Denisa-Iulia Brus
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Process Parameters ◽  
Bending Stress ◽  
Test Results ◽  
Printing Process ◽  
Simulation Process ◽  
Bending Resistance ◽  
3D Printed

Additive manufacturing is one of the technologies that is beginning to be used in new fields of parts production, but it is also a technology that is constantly evolving, due to the advances made by researchers and printing equipment. The paper presents how, by using the simulation process, the geometry of the 3D printed structures from PLA and PLA-Glass was optimized at the bending stress. The optimization aimed to reduce the consumption of filament (material) simultaneously with an increase in the bending resistance. In addition, this paper demonstrates that the simulation process can only be applied with good results to 3D printed structures when their mechanical properties are known. The inconsistency of printing process parameters makes the 3D printed structures not homogeneous and, consequently, the occurrence of errors between the test results and those of simulations become natural and acceptable. The mechanical properties depend on the values of the printing process parameters and the printing equipment because, in the case of 3D printing, it is necessary for each combination of parameters to determine their mechanical properties through specific tests.

scholarly journals Effect of Porosity and Crystallinity on 3D Printed PLA Properties

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1487 ◽  
Author(s):  
Yuhan Liao ◽  
Chang Liu ◽  
Bartolomeo Coppola ◽  
Giuseppina Barra ◽  
Luciano Di Maio ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Polylactic Acid ◽  
Complex Geometry ◽  
Fused Filament Fabrication ◽  
3D Printed ◽  
Physical Changes ◽  
Crystalline Forms

Additive manufacturing (AM) is a promising technology for the rapid tooling and fabrication of complex geometry components. Among all AM techniques, fused filament fabrication (FFF) is the most widely used technique for polymers. However, the consistency and properties control of the FFF product remains a challenging issue. This study aims to investigate physical changes during the 3D printing of polylactic acid (PLA). The correlations between the porosity, crystallinity and mechanical properties of the printed parts were studied. Moreover, the effects of the build-platform temperature were investigated. The experimental results confirmed the anisotropy of printed objects due to the occurrence of orientation phenomena during the filament deposition and the formation both of ordered and disordered crystalline forms (α and δ, respectively). A heat treatment post-3D printing was proposed as an effective method to improve mechanical properties by optimizing the crystallinity (transforming the δ form into the α one) and overcoming the anisotropy of the 3D printed object.

Anisotropic Material Behaviors of 3D Printed Carbon-Fiber Polymer Composites With Open-Source Printers

2021 ◽  
Author(s):  
Jordan Garcia ◽  
Robert Harper ◽  
Y. Charles Lu
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Carbon Fiber ◽  
3D Printing ◽  
Open Source ◽  
Polymer Composites ◽  
Mechanical Responses ◽  
Manufacturing Technique ◽  
3D Printed ◽  
Traditional Manufacturing

Abstract Composite products are often created using traditional manufacturing methods such as compression or injection molding. Recently, additive manufacturing (3D printing) techniques have been used for fabricating composites. 3D printing is the process of producing three-dimensional parts through the successive combination of various layers of material. This layering effect in combination with exposure to ambient (or reduced) temperature and pressure cause the finished products to have inconsistent microstructures. The inconsistent microstructures along with the oriented reinforcing fibers create anisotropic parts with difficulty to predict mechanical properties. In this paper, the mechanical properties of fiber reinforced polymer composites produced by additive manufacturing technique (3D printing) and by traditional manufacturing technique (compression molding) were investigated. Three open-source 3D printers, i.e. FlashForge Dreamer, Tevo Tornado, and Prusa i3 Mk3, were used to fabricate bending samples from carbon-fiber reinforced ABS (acrylonitrile butadiene styrene). Results showed that there exist significant discrepancies and anisotropies in mechanical properties of 3D printed composites. First, the properties vary greatly among parts made from different printers. Secondly, the mechanical responses of 3D printed parts strongly depend upon the orientations of the filaments. Parts with the infill oriented along the length of the specimens showed the most favorable mechanical responses such as Young’s modulus, maximum strength, and toughness. Thirdly, all 3D printed parts exhibit inferior properties to those made by conventional manufacturing. Finally, theoretical modeling has been attempted to predict the mechanical responses of 3D printed products and can potentially be used to “design” the 3D printing processes to achieve the optimal performance.

ANISOTROPIC MATERIAL BEHAVIORS OF 3D PRINTED CARBON-FIBER POLYMER COMPOSITES WITH OPEN-SOURCE PRINTERS

2021 ◽  
pp. 1-8
Author(s):  
Jordan Garcia ◽  
Robert Harper ◽  
Y. Charles Lu
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Carbon Fiber ◽  
3D Printing ◽  
Open Source ◽  
Polymer Composites ◽  
Mechanical Responses ◽  
Manufacturing Technique ◽  
3D Printed ◽  
Traditional Manufacturing

Abstract Composite products are often created using traditional manufacturing methods such as compression or injection molding. Recently, additive manufacturing (3D printing) techniques have been used for fabricating composites. 3D printing is the process of producing three-dimensional parts through the successive combination of various layers of material. This layering effect in combination with exposure to ambient (or reduced) temperature and pressure cause the finished products to have inconsistent microstructures. The inconsistent microstructures along with the oriented reinforcing fibers create anisotropic parts with difficulty to predict mechanical properties. In this paper, the mechanical properties of fiber reinforced polymer composites produced by additive manufacturing technique (3D printing) and by traditional manufacturing technique (compression molding) were investigated. Three open-source 3D printers, i.e. FlashForge Dreamer, Tevo Tornado, and Prusa i3 Mk3, were used to fabricate bending samples from carbon-fiber reinforced ABS (acrylonitrile butadiene styrene). Results showed that there exist significant discrepancies and anisotropies in mechanical properties of 3D printed composites. First, the properties vary greatly among parts made from different printers. Secondly, the mechanical responses of 3D printed parts strongly depend upon the orientations of the filaments. Parts with the infill oriented along the length of the specimens showed the most favorable mechanical responses such as Young's modulus, maximum strength, and toughness. Thirdly, all 3D printed parts exhibit inferior properties to those made by conventional manufacturing. Finally, theoretical modeling has been attempted to predict the mechanical responses of 3D printed products and can be used to “design” the 3D printing processes.

Fused Filament Fabrication 3D Printed Polylactic Acid Electroosmotic Pumps

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Liang Wu ◽  
Stephen Beirne ◽  
Joan-Marc Cabot Canyelles ◽  
Brett Paull ◽  
Gordon G. Wallace ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Polylactic Acid ◽  
Fused Filament Fabrication ◽  
Flexible Approach ◽  
Electroosmotic Pump ◽  
3D Printed ◽  
Electroosmotic Pumps

Additive manufacturing (3D printing) offers a flexible approach for the production of bespoke microfluidic structures such as the electroosmotic pump. Here a readily accessible fused filament fabrication (FFF) 3D printing...

Mechanical Properties of 3D-Printed Wood-Plastic Composites

2018 ◽  
Vol 777 ◽  
pp. 499-507 ◽  
Author(s):  
Ossi Martikka ◽  
Timo Kärki ◽  
Qing Ling Wu
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
3D Printing ◽  
Impact Strength ◽  
Polylactic Acid ◽  
Wood Plastic Composite ◽  
Wood Plastic Composites ◽  
Plastic Composite ◽  
Plastic Composites ◽  
3D Printed

3D printing has rapidly become popular in both industry and private use. Especially fused deposition modeling has increased its popularity due to its relatively low cost. The purpose of this study is to increase knowledge in the mechanical properties of parts made of wood-plastic composite materials by using 3D printing. The tensile properties and impact strength of two 3D-printed commercial wood-plastic composite materials are studied and compared to those made of pure polylactic acid. Relative to weight –mechanical properties and the effect of the amount of fill on the properties are also determined. The results indicate that parts made of wood-plastic composites have notably lower tensile strength and impact strength that those made of pure polylactic acid. The mechanical properties can be considered sufficient for low-stress applications, such as visualization of prototypes and models or decorative items.

scholarly journals Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1154 ◽  
Author(s):  
Wang ◽  
Zhao ◽  
Fuh ◽  
Lee
Keyword(s):  
Computed Tomography ◽  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Micromechanical Model ◽  
Micromechanical Modeling ◽  
X Ray ◽  
Fused Deposition ◽  
3D Printed ◽  
X Ray Computed

Additive manufacturing (commonly known as 3D printing) is defined as a family of technologies that deposit and consolidate materials to create a 3D object as opposed to subtractive manufacturing methodologies. Fused deposition modeling (FDM), one of the most popular additive manufacturing techniques, has demonstrated extensive applications in various industries such as medical prosthetics, automotive, and aeronautics. As a thermal process, FDM may introduce internal voids and pores into the fabricated thermoplastics, giving rise to potential reduction on the mechanical properties. This paper aims to investigate the effects of the microscopic pores on the mechanical properties of material fabricated by the FDM process via experiments and micromechanical modeling. More specifically, the three-dimensional microscopic details of the internal pores, such as size, shape, density, and spatial location were quantitatively characterized by X-ray computed tomography (XCT) and, subsequently, experiments were conducted to characterize the mechanical properties of the material. Based on the microscopic details of the pores characterized by XCT, a micromechanical model was proposed to predict the mechanical properties of the material as a function of the porosity (ratio of total volume of the pores over total volume of the material). The prediction results of the mechanical properties were found to be in agreement with the experimental data as well as the existing works. The proposed micromechanical model allows the future designers to predict the elastic properties of the 3D printed material based on the porosity from XCT results. This provides a possibility of saving the experimental cost on destructive testing.

Sign in / Sign up

Export Citation Format

Share Document