Highway Mounted Horizontal Axial Flow Turbines for Wind Energy Harvesting From Cruising Vehicles

2016 ◽  
Author(s):  
Shreyas S. Hegde ◽  
Anand Thamban ◽  
Shah Palash Manish Bhai ◽  
Arham Ahmed ◽  
Meet Upadhyay ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Turbines ◽  
Large Scale ◽  
Theoretical Calculations ◽  
Renewable Energy Sources ◽  
Axial Flow ◽  
Horizontal Axis Wind Turbine ◽  
Power Calculations ◽  
Suitable Material

Renewable energy technologies are a growing subject of concern these days. Wind energy is one among the renewable energy sources which has been implemented in a large scale for energy production. A large amount of capital has been invested in this field to harness energy and power homes. Wind energy from highways is usually unused and can provide a considerable amount of wind energy to drive a turbine due to high vehicle traffic and the speed of the vehicles. Extensive research on wind patterns is required to determine the average velocity of the wind created by oncoming vehicles. The objective of this work is to design and analyze a horizontal axis wind turbine to capture wind energy from moving vehicles on the highway. A computational fluid dynamics approach is used to solve this problem. The major innovation in this paper is that wind energy is being harvested in a very unique manner and also turbine power calculations have been done to quantify the amount of energy being harvested. Although a few of the literatures have discussed similar ideas power quantification has never been done. Also the entire mechanism has been simulated in MATLAB to find out the number of cars required to charge a battery which is very unique to this paper. Power calculations have been done for the turbine and validated against theoretical calculations which were done using the concept of velocity triangles. The idea is to have a separate mounting for cars and heavy vehicles which can be realized by having separate lanes on highways. The analysis will be done for vehicles moving in a range of speeds on the highway. The wind turbines will be placed on overhead shafts (the height of which is be determined suitably) thereby capturing the wind generated as a result of pressure difference. The mounts can also be used as signboards for vehicles moving on the highway and hence serve a dual purpose. In addition, extensive structural and fatigue analysis will be done for the turbines and the mounting structures in order to determine a suitable material for the turbine as well as the mounts to withstand the forces generated. Using all of the collected energy, existing amenities such as street lights on the medians can be powered by these wind turbines. Thus the main objective of this work is to complement the conventional electrical energy used for powering amenities along highways by a renewable source of energy (wind power) thereby leading to the concept of sustainable highways.

scholarly journals New Energy Technologies: Microalgae, Photolysis and Airborne Wind Turbines

Sci ◽  
2019 ◽  
Vol 1 (2) ◽  
pp. 43 ◽  
Author(s):  
Patrick Moriarty ◽  
Damon Honnery
Keyword(s):  
Renewable Energy ◽  
Wind Turbines ◽  
Large Scale ◽  
New Technologies ◽  
Renewable Energy Sources ◽  
Extreme Weather Events ◽  
Energy Sources ◽  
Energy Technologies ◽  
New Energy ◽  
Near Term

Because of the near-term risk of extreme weather events and other adverse consequences from climate change, and, at least in the longer term, global fossil fuel depletion, there is world-wide interest in shifting to noncarbon energy sources, especially renewable energy (RE). Because of possible limitations on conventional renewable energy sources, researchers have looked for ways of overcoming these shortcomings by introducing radically new energy technologies. The largest RE source today is bioenergy, while solar energy and wind energy are regarded as having the largest technical potential. This paper reviews the literature on proposed new technologies for each of these three RE sources: microalgae for bioenergy, photolysis and airborne wind turbines. The main finding is that their proponents have underestimated the difficulties facing their introduction on a very large scale.

Modelling and Control of the Hydraulically Actuated Horizontal Axis Wind Turbine Pitch System

2019 ◽  
Author(s):  
P. Venkaiah ◽  
B. K. Sarkar
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Pid Controller ◽  
Renewable Energy Sources ◽  
Horizontal Axis ◽  
Energy Sources ◽  
Horizontal Axis Wind Turbine ◽  
The World

Abstract The advantages of renewable energy sources are available freely in nature, inexhaustible, produce either no or little pollution and low gestation period. Among all renewable energy sources, wind energy has become one of the leading resources for power production in the world as well as in the India. According to WWEA, the wind turbine installation capacity in the world has been reached over 539.291GW by the end of 2017. The entire wind power installed capacity by the end of 2017 covers more than 5% of global demand of electricity. In India, the present wind power installation capacity on October, 2017 was over 32.7GW and wind energy contribution is 55% of the total renewable energy capacity in the country. Inspite of having sharp growth rate in wind in India, only a fraction of wind energy has been tapped until now out of 302 GW wind potential which is available above 100 m height on shore. Practical horizontal axis wind turbine converts kinetic energy in the wind into useful energy by using airfoil blades. Blade element momentum (BEM) theory becomes very popular due to its simplicity in mathematical calculation as well as accuracy. Hydraulic pitch actuation system has certain advantages due to its versatility, ability to produce constant force and torque irrespective of the disturbances outside of the system, ease and accuracy of control, simplicity, safety and economy. In the present study a semi rotary actuator has been utilized for turbine pitch actuation. In order to extract maximum power from available wind, fractional order PID controller (FOPID) has been developed for pitch control of wind turbine rotor blade. The performances of PID as well as FOPID controller have been compared with available wind data. The performance of FOPID controller was satisfactory compare to PID controller.

scholarly journals An Evaluation of Primary Energy Factor Values of Wind Turbines

Proceedings ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 9 ◽  
Author(s):  
Rokas Tamašauskas ◽  
Jolanta Šadauskienė ◽  
Patrikas Bruzgevičius ◽  
Dorota Anna Krawczyk
Keyword(s):  
Renewable Energy ◽  
Energy Consumption ◽  
Wind Energy ◽  
Wind Turbines ◽  
Renewable Energy Sources ◽  
Wind Farms ◽  
Energy Performance ◽  
Primary Energy ◽  
Energy Factor ◽  
Eu Member States

In order to fulfil the European Energy Performance of Buildings Directive (EPBD) requirements regarding the reduction of energy consumption in buildings, much attention has been paid to primary energy consumption. Wind energy is one type of primary energy. The analysis of the literature has revealed that wind energy is evaluated by different methods. Therefore, the aim of this article was to calculate the effect of the parameters of wind sources on the primary energy factor of wind turbines. In order to achieve this aim, the primary energy factor of 100 investigated wind turbines and 11 wind farms operating in Lithuania was calculated. Investigation results showed that the difference of the non-renewable primary energy factor between wind turbines due to capacity is 35%. This paper provides a recommendation with regard to EU energy efficiency and renewable energy directives and regulations: All EU member states should use the same or very similar methodology for the calculation of the primary energy factor of renewable and non-renewable energy sources.

A Study on Wind - Energy Storage Hybrid System

2011 ◽  
Vol 187 ◽  
pp. 97-102 ◽  
Author(s):  
Liang Liang ◽  
Jian Lin Li ◽  
Dong Hui
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power System ◽  
Wind Energy ◽  
Wind Power ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Wind Power System

Recently, more and more people realize the importance of environment protection. Electric power generation systems using renewable energy sources have an advantage of no greenhouse effect gas emission. Among all the choices, wind power can offer an economic and environmentally friendly alternative to conventional methods of power supply. As a result, wind energy generation, utilization and its grid penetration in electrical grid is increasing world wide. The wind generated power is always fluctuating due to its time varying nature and causing stability problem. Inserting energy storage system into large scale wind farm to eliminate the fluctuation becomes a solution for developing large scale renewable energy system connected with grid. The topology diagram and control strategy are presented in this paper. According to the simulation result, it could be indicated that embedding energy storage system into wind power system could improve the access friendly and extend system functions. This paper shows that integrating energy storage system into wind power system will build a more reliable and flexible system for power grid.

Numerical Investigation to Assess an Optimal Blade Profile for the Drag Based Vertical Axis Wind Turbine

2013 ◽  
Author(s):  
Sukanta Roy ◽  
Ujjwal K. Saha
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Turbines ◽  
Energy Demand ◽  
Computational Study ◽  
Flow Behavior ◽  
Renewable Energy Sources ◽  
Vertical Axis ◽  
Small Scale ◽  
Vertical Axis Wind Turbine

Rapid depletion rate of fossil fuels with an increasing energy demand and their high emission are imposing the evolution activities in the arena of renewable energy. To meet the future demands of renewable energy sources, wind energy is a very promising concept. In this feature, the drag based vertical axis wind turbines (VAWTs) are suitable for small scale wind energy generation for decentralized locations. However, these turbines have low power and torque coefficients as compared to other wind turbines. Numerous blade shapes have been proposed till now to improve the performance of these turbines. In the present paper, a computational study has been performed to simulate the air-flow over different blade profiles using shear stress transport (SST) k–ω turbulence model. The results obtained are validated with the available experimental data. In the dynamic simulations, the power and torque coefficients are calculated considering the blade arc angle as the variable shape parameter. The effects of drag and lift forces on the variable blade shapes are also studied in static simulations at various angular positions. The present paper tries to demonstrate an effective computational methodology to predict the flow behavior around a drag based VAWT. Through this study, it has been found possible to select an optimal blade shape from the point of its aerodynamic performance.

Development of a Chassis Mounted Multi Stage Axial Flow Turbine for Wind Energy Harvesting on a Cruising Transport Vehicle: A CFD Based Approach

2016 ◽  
Author(s):  
Shreyas S. Hegde ◽  
Anand Thamban ◽  
Arham Ahmed ◽  
Meet Upadhyay ◽  
Arun Mahalingam
Keyword(s):  
Renewable Energy ◽  
Energy Harvesting ◽  
Wind Energy ◽  
Drag Force ◽  
Fossil Fuels ◽  
Catalytic Converter ◽  
Renewable Energy Sources ◽  
Axial Flow ◽  
Energy Sources ◽  
Exhaust Gases

Fossil fuels have been a means of energy source since a long time, and have tended to the needs of the large global population. These conventional sources are bound to deplete in the near future and hence there is a need for producing energy from renewable energy sources like solar, wind, geothermal, tidal etc. Technologies involving renewable energy are a growing subject of concern. Further, the problem is also one of excessive pollution caused by conventional sources of energy and their impact on the environment. In particular, one of the main sources of pollution is harmful gases emitting out of automobiles. Wind energy is one among the renewable energy sources which is implemented in large scale energy production to supplement growing domestic energy needs. Significant amount of research has been done in this field to harness energy to power household and other amenities using wind farms. The aim of this project is to come up with a low cost solution for wind energy harvesting on moving vehicles. The purpose of this study is to consider the use of wind energy along with conventional energy sources to power automobiles. This would help reduce the use of fossil fuels in automobiles and hence reduce the resulting environmental pollution. Also since the turbine adds to the weight of the vehicle the aim also is to minimize the weight of the turbine. Extensive structural analysis is done for this purpose to choose a material which would be both light weight and also be able to withstand the stresses developed. In the current paper the drag force produced in automobiles is harvested by using a convergent divergent nozzle mounted below the chassis of the car. Initially drag analysis is done in order to determine the increase in drag force produced after mounting of the nozzle. It is found from existing literature that the drag increases by 3.4% after the mounting of the nozzle making it possible the mounting of a nozzle beneath the car. Additionally exhaust gases is also allowed to pass through the same duct to increase the mass flow to the turbine and thus generate more energy. This is made to strike the blades of a 2 stage axial flow turbine whose rotation generates energy. The power output from the turbine is the parameter of interest. This energy can also be stored in batteries and be used to run auxiliary equipment of the automobile including the air conditioner. The exhaust gases will be passed through a catalytic converter before striking the blades of the turbine in order to prevent corrosion of the blades. Computational Fluid Dynamics (CFD) is used to validate the concept and also come up with a design that maximizes energy generation by such turbines. Numerical results obtained by simulation are validated by theoretical calculation based on turbines inlet and outlet velocity triangles. The future scope of the project would include the use of multiple nozzles in order to study its performance.

scholarly journals Design and simulation of Lidar based control system for wind turbine

2021 ◽  
Vol 12 (1) ◽  
pp. 542
Author(s):  
Atif Iqbal ◽  
Deng Ying ◽  
Faheem Akhter ◽  
Manoj Kumar Panjwani ◽  
Danish Khan
Keyword(s):  
Renewable Energy ◽  
Control System ◽  
Wind Energy ◽  
Simulation Model ◽  
Wind Turbine ◽  
Energy Requirement ◽  
Renewable Energy Sources ◽  
Horizontal Axis Wind Turbine ◽  
Wind Lidar ◽  
Feedback Method

Renewable energy sources could be the main contributor to fulfilling the world’s energy requirement. Wind energy is grabbing the world’s attention due to its abundant nature and reliability. Wind energy is a prominent renewable energy source due to its availability and higher reliability. Despite the aforementioned benefits, there are some challenges such as wind measurement and prediction due to the turbulent nature of the wind. Lidar (light detection and ranging) technology is used in wind turbines to preview the wind and act it accordingly. Wind speed along with the direction is measured by the Lidar before it reaches the wind turbine plane and the control system of the wind turbine utilizes this data for optimal results. It enhances the control system along with it optimizes the output power. This paper presents the Lidar simulation model, which previews the wind earlier than the conventional feedback method. The Lidar simulation model is prepared and implemented on the horizontal axis wind turbine. The simulation is performed in GH Bladed at a 2.0 MW wind turbine. The output results are analyzed with the former method. The power extracted, pitch angle, rotor torque obtained from the proposed methodology proves its efficacy.

scholarly journals Methodology for Calculating the Potential Maritime Wind Park Area by Taking into Account the Needs of Shipping Sector

2018 ◽  
Vol 64 ◽  
pp. 06003
Author(s):  
Rijkure Astrida
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Turbines ◽  
Oil And Gas ◽  
Renewable Energy Sources ◽  
Wind Farms ◽  
Offshore Wind ◽  
Energy Sources ◽  
Energy Prices ◽  
Wind Park

Renewable energy sources (wind energy, solar energy, hydroelectricity, ocean energy, geothermal energy, biomass and biofuels) are alternatives to fossil fuel that help to reduce greenhouse gas emissions, diversify energy supplies and reduce dependency on markets of unsustainable and volatile fossil fuels, particularly oil and gas. Wind energy is one of the renewable energy sources and is considered to be self-renewable as it is the result of the Sun’s activity. Using wind energy is a rapidly developing industry today, and more and more wind turbines are installed worldwide every year, land-based wind turbines being more widespread than offshore ones. In Latvia, spread of land-based wind parks is hampered by unsettled land ownership rights, while the deployment of wind parks in the sea is a new field for all Baltic States. The neighbouring countries Estonia and Lithuania have developed their own projects for offshore wind parks, therefore the topicality of the development of wind farms in the territorial waters of Latvia has also increased. Experts have proposed best options and their locations. When assessing possibilities for development of wind parks and their capacity, the following economic factors were evaluated: construction and connection costs, potential operational costs and energy prices. The aim of this study is to develop the methodology for calculating the area of a potential wind park by considering the safety distance to shipping routes and height of the wind turbines, as well as for calculating the potential capacity of a wind park.

scholarly journals The Evaluating of Wind Energy Potential of Osmaniye

2020 ◽  
pp. 38-48
Author(s):  
C. Kurt ◽  
B. Yelmen ◽  
M. T. Çakir
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Turbines ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Energy Sources ◽  
Wind Effect ◽  
Energy Potential ◽  
Wind Potential

In parallel with the rapid increase in energy consumption today, it is known that conventional energy resources will be exhausted in the near future. Renewable energy sources are becoming more important today with decreasing available fossil resources and increasing energy needs. Wind energy is a clean and renewable energy source and has a remarkable importance. Wind energy is one of the most important renewable energy sources, whose technology and use have developed rapidly and their economy has become competitive with fossil energy sources. The systems that convert the energy in the wind into electrical energy are wind turbines. Wind turbines are classified according to their rotational axes, revolutions, powers, number of wings, wind effect, gear characteristics and installation locations. Energy has become one of the most important problems of the world countries today. Energy demand, as in many countries, is increasing with each passing day in Turkey. For this reason, solutions are sought to provide the energy needed in a timely, sufficient and reliable manner. The energy needed in these solution suggestions should be provided from domestic production opportunities and local energy sources as much as possible. In this study, usability of wind energy is tried to be revealed in Osmaniye province and its surroundings. When the wind map studies in Turkey are examined, in Osmaniye Province it has been found that the presence of wind potential, it is necessary to increase the number of WPP to benefit more from the potential of wind energy.

Wind Power: History, State, and Prospects

Vestnik MEI ◽  
2020 ◽  
Vol 5 (5) ◽  
pp. 11-26
Author(s):  
Eduard M. Perminov ◽  
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Power ◽  
Power Supply ◽  
Electricity Market ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Power Industry ◽  
Instrument Making ◽  
The World

Many countries around the world began to actively develop renewable energy after the energy crisis of the mid 1970s, when commercial technologies for its use emerged, and nowadays, progress in this field develops much more rapidly than it was expected a decade ago. Modern technologies of using renewable energy sources (RES) are attractive owing to their advantages: they are widely available and inexhaustible; they feature smaller pollution of the environment; their use helps save traditional nonrenewable fossil energy resources; they involve the use of modern high technologies; in addition, they help create new skilled jobs. Russia, despite its large reserves of oil, gas, and coal, is also interested in using RES as an important means of diversifying the country's fuel and energy balance, energy saving, and improving energy security and efficiency with centralized and decentralized supply of power to all regions of the country. This is especially important for regions that face big problems with ensuring reliable and high-quality supply of power. One of the most important areas of renewable energy is wind energy; according to different estimates, it can provide up to 50% or more of the future energy consumption. An attempt is made to estimate the history, state, and prospects for development of the world and domestic wind power industry. The development stages and the role of domestic and industry science, and also the possibilities of the domestic production facilities and ways of improving it are shown. In the course of restructuring and reorganizing the domestic economy, research and development structures, the domestic industry constructing power machinery and equipment, radio electronics, instrument making, and other industries that form the basis for RES and, in particular, wind power, were destroyed to a significant extent. The potential of wind energy, as well as that of other RES that are "not traditional" for the Russian energy sector, has not been fully employed as yet, although in principle, they can solve many energy problems. This is also due to the fact that the current price level in the wholesale electricity market is lower than the net cost of electricity generated by means of RES. This is especially important in solving matters concerned with arrangement of decentralized power supply in Russia, with its vast territory, poorly developed infrastructure, and the world's harshest climate, in which, according to various estimates, from 50 to 70% of the territory is not covered by reliable guaranteed power supply. The problems of successful and efficient development of RES, including wind energy, should become the most important issues already in the near future, and it should be noted that positive steps in this direction have been taken in recent years. At the same time, it should be understood that RES are not an alternative to the "traditional large-scale" power industry, but rather complement it, occupying its own very specific niche.

Sign in / Sign up

Export Citation Format

Share Document