Single Point Incremental Forming of Friction Stir Processed AA6063-O Alloy

2015 ◽  
Author(s):  
Senthil Kumar Velukkudi Santhanam ◽  
Vigneshwaran Ganesan ◽  
Subramanian Pillappan Shanmuganatan
Keyword(s):  
Incremental Forming ◽  
Single Point ◽  
Three Dimensional ◽  
High Capacity ◽  
Numerical Control ◽  
Special Technique ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Friction Stir ◽  
Increasing Demand

In the recent manufacturing trend and, in particular, in sheet metal forming, the requirement of customized production is still growing. Incremental forming is a special technique requiring no high capacity presses or set of dies, thus meeting the increasing demand for low volume production and rapid prototyping. The complex three dimensional parts of sheet metals are formed by the computer numerical control (CNC) movement of a simple generative hemispherical tool. In this paper, the single point incremental forming process is performed on friction stir processed AA 6063-O alloy. The process parameters for the experiment are taken based on L9 Orthogonal array. In this paper the maximum wall angle or the formability is investigated on a formed pyramid frusta. It is inferred that Friction stir process has improved the ductility of the aluminium alloy thus contributing to enhanced formability.

Study on Forming Behaviour of Friction Stir Welded Blanks During Single Point Incremental Forming (SPIF) Process

2020 ◽  
Author(s):  
Shalin Marathe ◽  
Harit Raval
Keyword(s):  
Friction Stir Welding ◽  
Incremental Forming ◽  
Single Point ◽  
Base Material ◽  
Forming Limit ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Friction Stir ◽  
Welding Processes

Abstract The automobile, transportation and shipbuilding industries are aiming at fuel efficient products. In order to enhance the fuel efficiency, the overall weight of the product should be brought down. This requirement has increased the use of material like aluminium and its alloys. But, it is difficult to weld aluminium using conventional welding processes. This problem can be solved by inventions like friction stir welding (FSW) process. During fabrication of product, FSW joints are subjected to many different processes and forming is one of them. During conventional forming, the formability of the welded blanks is found to be lower than the formability of the parent blank involved in it. One of the major reasons for reduction in formability is the global deformation provided on the blank during forming process. In order to improve the formability of homogeneous blanks, Single Point Incremental Forming (SPIF) is found to be giving excellent results. So, in this work formability of the welded blanks is investigated during the SPIF process. Friction Stir Welding is used to fabricate the welded blanks using AA 6061 T6 as base material. Welded blanks are formed in to truncated cone through SPIF process. CNC milling machine is used as SPIF machine tool to perform the experimental work. In order to avoid direct contact between weld seam and forming tool, a dummy sheet was used between them. As responses forming limit curve (FLC), surface roughness, and thinning are investigated. It was found that use of dummy sheet leads to improve the surface finish of the formed blank. The formability of the blank was found less in comparison to the parent metal involved in it. Uneven distribution of mechanical properties in the welded blanks leads to decrease the formability of the welded blanks.

scholarly journals Experimental Study the Effect of Tool Geometry on Dimensional Accuracy in Single Point Incremental Forming (SPIF) Process

2018 ◽  
Vol 21 (1) ◽  
pp. 108 ◽  
Author(s):  
Aqeel Sabree Bedan ◽  
Halah Ali Habeeb
Keyword(s):  
Incremental Forming ◽  
Single Point ◽  
Dimensional Accuracy ◽  
Numerical Control ◽  
Tool Geometry ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Wall Angle ◽  
Product Profile ◽  
Tool Diameter

Incremental forming is a flexible sheet metal forming process which performed by utilizes simple tools to locally deform a sheet of metal along a predefined tool path without using of dies. One limitations of single point incremental forming (SPIF) process is the error occur between the CAD design and the product profile. This work presents the single point incremental forming process for produced pyramid geometry and studied the effect of tool geometry, tool diameter, wall angle, and spindle speed on the dimensional accuracy. Three geometries of forming tools were used in experimental work: ball end tool, hemispherical tool, and flat with round corner tool. The sheet material used was pure Aluminum (Al 1050) with thickness of (0.9 mm). The experimental tests in this work were done on the computer numerical control (CNC) vertical milling machine. The products dimensions were measured by utilized the dimensional sensor measuring instrument. The extracted results from the single point incremental forming process indicated the best acceptance between the CAD profile and product profile was found with the ball end tool and diameter of (10 mm), wall angle (50°) and the rotational speed of the tool was (800 rpm).

scholarly journals An Investigation Study of Tool Geometry in Single Point Incremental Forming (SPIF) and their effect on Residual Stresses Using ANOVA Model

2019 ◽  
Vol 14 (2) ◽  
pp. 1-13
Author(s):  
Aqeel S Sabree Bedan ◽  
Halah Ali H Habeeb
Keyword(s):  
Residual Stresses ◽  
Rotational Speed ◽  
Incremental Forming ◽  
Single Point ◽  
Numerical Control ◽  
Tool Geometry ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Wall Angle ◽  
Tool Diameter

Incremental forming is a flexible sheet metal forming process which is performed by utilizing simple tools to locally deform a sheet of metal along a predefined tool path without using of dies. This work presents the single point incremental forming process for producing pyramid geometry and studies the effect of tool geometry, tool diameter, and spindle speed on the residual stresses. The residual stresses were measured by ORIONRKS 6000 test measuring instrument. This instrument was used with four angles of (0º,15º,30º, and 45º) and the average value of residual stresses was determined, the value of the residual stress in the original blanks was (10.626 MPa). The X-ray diffraction technology was used to measure the residual stresses. The sheet material used was Aluminum alloy (AL1050) with thickness of (0.9 mm). The experimental tests in this work were done on the computer numerical control (CNC) vertical milling machine. The extracted results from the single point incremental forming process were analyzed using analysis of variance (ANOVA) to predict the effect of forming parameters on the residual stresses. The optimum value of the residual stresses (55.024 MPa) was found when using the flat end with round corner tool and radius of (3 mm), wall angle of (55°) and a rotational speed of the tool of (800 rpm). The minimum value of the residual stresses (24.389MPa) was found when using hemispherical tool with diameter of (12 mm), wall angle of (45°) and a rotational speed of the tool of (800 rpm).  

Multiobjective optimization of process variables in single-point incremental forming using grey relational analysis coupled with entropy weights

2021 ◽  
pp. 146442072110204
Author(s):  
Abdulmajeed Dabwan ◽  
Adham E Ragab ◽  
Mohamed A Saleh ◽  
Atef M Ghaleb ◽  
Mohamed Z Ramadan ◽  
...  
Keyword(s):  
Grey Relational Analysis ◽  
Incremental Forming ◽  
Single Point ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Numerical Control ◽  
Single Point Incremental Forming ◽  
Process Variables ◽  
Relational Analysis ◽  
Grey Relational

Incremental sheet forming is a specific group of sheet forming methods that enable the manufacture of complex parts utilizing computer numerical control instead of specialized tools. It is an incredibly adaptable operation that involves minimal usage of sophisticated tools, dies, and forming presses. Besides its main application in the field of rapid prototyping, incremental sheet forming processes can be used for the manufacture of unique parts in small batches. The goal of this study is to broaden the knowledge of the deformation process in single-point incremental forming. This work studies the deformation behavior in single-point incremental forming by experimentally investigating the principal stresses, principal strains, and thinning of single-point incremental forming products. Conical-shaped components are fabricated using AA1050-H14 aluminum alloy at various combinations of fundamental variables. The factorial design is employed to plan the experimental study and analysis of variance is conducted to analyze the results. The grey relational analysis approach coupled with entropy weights is also implemented to identify optimum process variables for single-point incremental forming. The results show that the tool diameter has the greatest effect on the thinning of the SPIF product, followed by the sheet thickness, step size, and feed rate.

Geometry Compensation Methods for Increasing the Accuracy of the SPIF Process

2021 ◽  
Vol 883 ◽  
pp. 217-224
Author(s):  
Yannick Carette ◽  
Marthe Vanhulst ◽  
Joost R. Duflou
Keyword(s):  
Control Strategy ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Calculation Methods ◽  
Forming Process ◽  
Complex Deformation ◽  
Commercial Use ◽  
Compensation Methods ◽  
Deformation Mechanics

Despite years of supporting research, commercial use of the Single Point Incremental Forming process remains very limited. The promised flexibility and lack of specific tooling is contradicted by its highly complex deformation mechanics, resulting in a process that is easy to implement but where workpiece accuracy is very difficult to control. This paper looks at geometry compensation as a viable control strategy to increase the accuracy of produced workpieces. The input geometry of the process can be compensated using knowledge about the deformations occurring during production. The deviations between the nominal CAD geometry and the actual produced geometry can be calculated in a variety of different ways, thus directly influencing the compensation. Two different alignment methods and three deviation calculation methods are explained in detail. Six combined deviation calculation methods are used to generate compensated inputs, which are experimentally produced and compared to the uncompensated part. All different methods are able to noticeably improve the accuracy, with the production alignment and closest point deviation calculation achieving the best results

Experimental Investigation of Single Point Incremental Forming of Aluminum Sheet in Groove Test

2017 ◽  
Vol 867 ◽  
pp. 177-183 ◽  
Author(s):  
Vikrant Sharma ◽  
Ashish Gohil ◽  
Bharat Modi
Keyword(s):  
Experimental Investigation ◽  
Incremental Forming ◽  
Single Point ◽  
Fractional Factorial ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Backing Plate ◽  
Groove Test ◽  
Factorial Design Of Experiments ◽  
Tool Diameter

Incremental sheet forming is one of the latest processes in sheet metal forming industry which has drawn attention of various researchers. It has shown improved formability compared to stamping process. Single Point Incremental Forming (SPIF) process requires only hemispherical tool and no die is required hence, it is a die-less forming process. In this paper experimental investigation on SPIF for Aluminium sheet has been presented. A groove test on Vertical Machining Centre has been performed. Factors (Step depth, Blank holder clamping area, Backing plate radius, Program strategy, Feed rate and Tool diameter) affecting the process are identified and experiments are carried out using fractional factorial design of experiments. Effect of the factors on fractured depth, forming time and surface finish have been analyzed using Minitab 17 software.

Sign in / Sign up

Export Citation Format

Share Document