Examination of the Ability of Conceptual Airbag Systems to Affect Restrained Occupant Kinematics and Associated Neck Loads During Rollover Impact Conditions

2012 ◽  
Author(s):  
Keith Friedman ◽  
John Hutchinson ◽  
Dennis Mihora
Keyword(s):  
Finite Element ◽  
Seat Belt ◽  
Finite Element Models ◽  
Design Elements ◽  
Occupant Protection ◽  
Protection Systems ◽  
Occupant Kinematics ◽  
Alternative Designs

Rollover occupant protection systems consist of many design elements such as various seat belt types, airbags, active and passive seats, and deployable systems in rollover impacts. In this study conceptual airbag systems intended to modify occupant kinematics were examined. The potential effects of these systems on occupant neck loads were evaluated. Finite element models of an LTV type vehicle and a 50th percentile dummy were utilized to evaluate the effects of alternative designs on neck loads under example rollover conditions. CAE representations of deployable airbag system types were created. Results of the study are summarized below.

Math-Based Performance Evaluation of an Experimental Car: Side Impact Protection

2002 ◽  
Author(s):  
Yih-Charng Deng ◽  
Chin-Hsu Lin ◽  
J. T. Wang
Keyword(s):  
Finite Element ◽  
Performance Evaluation ◽  
Side Impact ◽  
Finite Element Models ◽  
Occupant Protection ◽  
Potential Benefits ◽  
Impact Protection

This study used finite element models to assess potential benefits of selected unconventional features implemented in this study for occupant protection in side impact. These features include door lockdown, gullwing door with a corrugated aluminum panel and cross-car beams. The intrusion and intrusion velocity of the B-pillar were used as the parameters for measuring side impact protection performance. No attempt was made here to assess manufacturablity, design feasibility, mass implications or market interest.

Investigation of Heavy Truck Restraint System Effectiveness Through Finite Element Computer Simulations in Frontal Crashes

2016 ◽  
Author(s):  
Nathan Schulz ◽  
Chiara Silvestri Dobrovolny ◽  
Abhinav Mohanakrishnan
Keyword(s):  
Finite Element ◽  
Injury Severity ◽  
Seat Belt ◽  
Restraint System ◽  
Rigid Barrier ◽  
Heavy Trucks ◽  
Ring Location ◽  
Heavy Truck ◽  
Frontal Crashes ◽  
Occupant Kinematics

Computer finite element simulations play an important role in reducing the cost and time taken for prediction of a crash scenario. While interior crash protection has received adequate attention for automobiles, very little is known for commercial vehicle such as heavy trucks. The understanding of injury types for heavy trucks occupants in relation to different crash scenarios would help mitigation of the injury severity. Finite element computer models of the heavy truck cabin structure, interior cabin components, anthropomorphic test device (ATD) (also called dummy) and passive restraint systems were developed and assembled to simulate head-on crash of a heavy truck into a rigid barrier. The researchers developed a computer simulation parametric evaluation with respect to specific seat belt restraint system parameters for a speed impact of 56.3 km/h (35 mph). Restraint parameter variations within this research study are seat belt load limiting characteristics, inclusion of seat belt pretensioner, and variation of seat belt D-ring location. Additionally an airbag was included to investigate another restraint system. For each simulated impact characteristic and restraint system variation, the occupant kinematics were observed and occupant risks were assessed. Within the approximations and assumptions included in this study, the results presented in this paper should be considered as preliminary guidance on the effectiveness of the use of seat belt as occupant injury mitigation system.

A Finite Element Analysis of the General Rolling Contact Problem for a Viscoelastic Rubber Cylinder

1988 ◽  
Vol 16 (1) ◽  
pp. 18-43 ◽  
Author(s):  
J. T. Oden ◽  
T. L. Lin ◽  
J. M. Bass
Keyword(s):  
Finite Element ◽  
Variational Principles ◽  
Standing Waves ◽  
Rolling Contact ◽  
Finite Element Models ◽  
Viscoelastic Cylinder ◽  
Element Analysis ◽  
Elastic Rubber ◽  
Frictional Effects ◽  
Rough Foundation

Abstract Mathematical models of finite deformation of a rolling viscoelastic cylinder in contact with a rough foundation are developed in preparation for a general model for rolling tires. Variational principles and finite element models are derived. Numerical results are obtained for a variety of cases, including that of a pure elastic rubber cylinder, a viscoelastic cylinder, the development of standing waves, and frictional effects.

Affordable structural optimization for large-size dynamic finite element models

1997 ◽  
Author(s):  
Francois Hemez ◽  
Emmanuel Pagnacco ◽  
Francois Hemez ◽  
Emmanuel Pagnacco
Keyword(s):  
Finite Element ◽  
Structural Optimization ◽  
Finite Element Models ◽  
Dynamic Finite Element ◽  
Large Size
Sign in / Sign up

Export Citation Format

Share Document