Determination of the Effects of Air Gap and Hind Support on the Sound Absorption Coefficient of Biobased and Foam Materials

2012 ◽  
Author(s):  
N. V. David ◽  
M. N. Zainal ◽  
M. J. M. Nor
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Low Frequency ◽  
Air Gap ◽  
High Density ◽  
Sound Absorption Coefficient ◽  
Sound Waves ◽  
Fibrous Media ◽  
Rigid Foam ◽  
Quarter Wavelength

The sound absorption characteristics of wooden and porous materials including fibrous media and porous foams vary with the nature of their surface porosity. The low frequency absorption, which is of interest in noise control engineering, of these material types is generally enhanced by introducing an air gap of a certain width or a flexible support at the rear face of the material posterior to the impinging sound waves. This study investigates the effect of air gap with and without hind support on the low frequency absorption of a kenaf/epoxy composite, a Meranti wood, a low-density rigid foam and a high-density rigid foam. The sound absorption coefficient of these materials are determined using the two-microphone impedance tube transfer-function method according to ISO 10534-2 standard in the frequency range between 20 Hz and 1600 Hz. In this study, 5-mm, 10-mm, 50-mm and 100-mm wide air gaps are introduced at the posterior of the specimens to measure the influence of the quarter-wavelength absorption on sound absorption coefficient. Backing panels made from polyethylene are used to study the effect of hind support on sound absorption coefficient at different frequencies. The dBFA Suite 4.8.1 program is used to acquire and process the acoustic signals and the SCS8100 software package is employed for the computation of sound absorption coefficient. The sound absorption coefficient and characteristics of each material within the range of frequency tested are discussed based on the width of air gap (i.e., the quarter-wavelength effect) in tandem with the presence or absence of the hind support. It is found that the low frequency absorption of the high-density foam with the hind support improved the absorption by 50% as the air gap is increased from 0 to 100 mm. The opposite effect is observed for the other materials tested whereby the sound absorption coefficient is reduced by 30 to 40% with the hind support.

Broadening of the Sound Absorption Bandwidth of the Perforated Panel Using a Membrane-Type Resonator

2018 ◽  
Vol 140 (3) ◽  
Author(s):  
Xuezhi Zhu ◽  
Zhaobo Chen ◽  
Yinghou Jiao ◽  
Yanpeng Wang
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Degrees Of Freedom ◽  
Low Frequency ◽  
Absorption Capacity ◽  
Sound Absorption Coefficient ◽  
Sound Waves ◽  
Frequency Range ◽  
Absorption Bandwidth ◽  
Membrane Type

In order to broaden the sound absorption bandwidth of a perforated panel in the low frequency range, a lightweight membrane-type resonator is installed in the back cavity of the perforated panel to combine into a compound sound absorber (CSA). Because of the great flexibility, the membrane-type resonator can be vibrated easily by the incident sound waves passing through the holes of the perforated panel. In the low frequency range, the membrane-type resonator and the perforated panel constitute a two degrees-of-freedom (DOF)-resonant type sound absorption system, which generates two sound absorption peaks. By tuning the parameters of the membrane type resonator, a wide frequency band having a large sound absorption coefficient can be obtained. In this paper, the sound absorption coefficient of CSA is derived analytically by combining the vibration equation of the membrane-type resonator with the acoustic impedance equation of the perforated panel. The influences of the parameters of the membrane-type resonator on the sound absorption performance of the CSA are numerically analyzed. Finally, the wide band sound absorption capacity of the CSA is validated by the experimental test.

scholarly journals Study on the sound absorption behavior of multi-component polyester nonwovens: experimental and numerical methods

2018 ◽  
Vol 89 (16) ◽  
pp. 3342-3361 ◽  
Author(s):  
Tao Yang ◽  
Ferina Saati ◽  
Kirill V Horoshenkov ◽  
Xiaoman Xiong ◽  
Kai Yang ◽  
...  
Keyword(s):  
Numerical Methods ◽  
Absorption Coefficient ◽  
Empirical Model ◽  
Surface Impedance ◽  
Sound Absorption ◽  
Low Frequency ◽  
Accurate Method ◽  
Small Error ◽  
Sound Absorption Coefficient ◽  
Acoustical Properties

This study presents an investigation of the acoustical properties of multi-component polyester nonwovens with experimental and numerical methods. Fifteen types of nonwoven samples made with staple, hollow and bi-component polyester fibers were chosen to carry out this study. The AFD300 AcoustiFlow device was employed to measure airflow resistivity. Several models were grouped in theoretical and empirical model categories and used to predict the airflow resistivity. A simple empirical model based on fiber diameter and fabric bulk density was obtained through the power-fitting method. The difference between measured and predicted airflow resistivity was analyzed. The surface impedance and sound absorption coefficient were determined by using a 45 mm Materiacustica impedance tube. Some widely used impedance models were used to predict the acoustical properties. A comparison between measured and predicted values was carried out to determine the most accurate model for multi-component polyester nonwovens. The results show that one of the Tarnow model provides the closest prediction to the measured value, with an error of 12%. The proposed power-fitted empirical model exhibits a very small error of 6.8%. It is shown that the Delany–Bazley and Miki models can accurately predict surface impedance of multi-component polyester nonwovens, but the Komatsu model is less accurate, especially at the low-frequency range. The results indicate that the Miki model is the most accurate method to predict the sound absorption coefficient, with a mean error of 8.39%.

Estimation and experimental test of the sound-absorption coefficient of a pin-holder structure (Case of sound waves incidence upon the side surfaces of a group of cylinders)

2021 ◽  
Vol 263 (3) ◽  
pp. 3714-3719
Author(s):  
Takamasa Sato ◽  
Shuichi Sakamoto ◽  
Isami Nitta ◽  
Shunsuke Unai ◽  
Takunari Isobe ◽  
...  
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Propagation Constant ◽  
Characteristic Impedance ◽  
Physical Property ◽  
Sound Absorption Coefficient ◽  
Accurate Estimation ◽  
Sound Waves ◽  
Acoustic Characteristics ◽  
Measuring Tube

In this study, we conducted theoretical analyses and experiments related to the acoustic characteristics of the situation where sound waves are incident upon the side surfaces of a group of cylinders forming a pin-holder structure. The sound-absorption coefficient, entering its clearance between cylinders through the geometrical dimension of the clearance or the physical property of gas, was calculated. In the analytical model, the gap part of the pin-holder structure was divided into elements and approximated as a gap surrounded by two parallel planes. The characteristic impedance and propagation constant of the approximate gap were obtained and treated as one-dimensional transfer matrices; the sound-absorption coefficient was then calculated using the transfer-matrix method. The calculated value was compared to that obtained in an experiment with a sample prepared using a 3D printer; the sound-absorption coefficient was measured using a 2-microphone impedance-measuring tube. We attempted to make a simple yet accurate estimation of sound-absorption coefficient using these procedures. Our theoretical values displayed a similar tendency to that obtained by experiment.

scholarly journals Sound Absorption Performance of Sugar Palm Trunk Fibers

2019 ◽  
Vol 130 ◽  
pp. 01003
Author(s):  
Anditya Endar Prabowo ◽  
Kuncoro Diharjo ◽  
Ubaidillah ◽  
Iwan Prasetiyo
Keyword(s):  
Absorption Coefficient ◽  
Bulk Density ◽  
Sound Absorption ◽  
Random Noise ◽  
Air Gap ◽  
Sound Absorption Coefficient ◽  
Low Frequencies ◽  
Central Java ◽  
Absorption Performance ◽  
Small Medium Enterprises

The purpose of this research is to investigate the effect of bulk density, thickness, and air gap to sound absorption performance on absorber based sugar palm trunk fibers. The fibers were obtained from solid waste on Small-Medium Enterprises of sago flour processing in Klaten, Central Java, Indonesia. The absorber specimens were formed from the fibers using a simple press molding in an oven at 150 °C. According to ISO 10534-2, the absorber samples were tested using two microphones impedance tube with random noise source to get the curve of the sound absorption coefficient. The result shows that the absorption performance can be improved by increasing bulk density and increasing of sample thickness. Especially at low frequencies, improvement of the sound absorption coefficient can be achieved (NAC > 0.8) by applying the air gap behind the sample. The best performance of absorber based sugar palm trunk fiber can be achieved for (1 000 to 6 000) Hz range frequency.

scholarly journals Elucidating the Sound Absorption Characteristics of Foxtail Millet (Setariaitalica) Husk

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5126
Author(s):  
Dhayalini Balasubramanian ◽  
Senthil Rajendran ◽  
Bhuvanesh Srinivasan ◽  
Nirmalakumari Angamuthu
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Foxtail Millet ◽  
Air Gap ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Mass Content ◽  
Frequency Range ◽  
Backing Material ◽  
Absorption Characteristics

The current study deals with the analysis of sound absorption characteristics of foxtail millet husk powder. Noise is one the most persistent pollutants which has to be dealt seriously. Foxtail millet is a small seeded cereal cultivated across the world and its husk is less explored for its utilization in polymer composites. The husk is the outer protective covering of the seed, rich in silica and lingo-cellulose content making it suitable for sound insulation. The acoustic characterization is done for treated foxtail millet husk powder and polypropylene composite panels. The physical parameters like fiber mass content, density, and thickness of the composite panel were varied and their influence over sound absorption was mapped. The influence of porosity, airflow resistance, and tortuosity was also studied. The experimental result shows that 30-mm thick foxtail millet husk powder composite panel with 40% fiber mass content, 320 kg/m3 density showed promising sound absorption for sound frequency range above 1000 Hz. We achieved noise reduction coefficient (NRC) value of 0.54. In view to improve the performance of the panel in low-frequency range, we studied the efficiency of incorporating air gap and rigid backing material to the designed panel. We used foxtail millet husk powder panel of density 850 kg/m3 as rigid backing material with varying air gap thickness. Thus the composite of 320 kg/m3 density, 30-mm thick when provided with 35-mm air gap and backing material improved the composite’s performance in sound frequency range 250 Hz to 1000 Hz. The overall sound absorption performance was improved and the NRC value and average sound absorption coefficient (SAC) were increased to 0.7 and 0.63 respectively comparable with the commercial acoustic panels made out of the synthetic fibers. We have calculated the sound absorption coefficient values using Delany and Bezlay model (D&B model) and Johnson–Champoux–Allard model (JCA model) and compared them with the measured sound absorption values.

scholarly journals Sound absorption properties of multi-layer structural composite materials based on waste corn husk fibers

2020 ◽  
Vol 15 ◽  
pp. 155892502091086
Author(s):  
Lihua Lyu ◽  
Jing Lu ◽  
Jing Guo ◽  
Yongfang Qian ◽  
Hong Li ◽  
...  
Keyword(s):  
Composite Materials ◽  
Absorption Coefficient ◽  
Sound Absorption ◽  
Low Frequency ◽  
Sound Absorption Coefficient ◽  
Absorption Properties ◽  
Cavity Depth ◽  
Air Cavity ◽  
Corn Husk ◽  
Structural Composite

In order to find a reasonable way to use the waste corn husk, waste degummed corn husk fibers were used as reinforcing material in one type of composite material. And polylactic acid particles were used as matrix material. The composite materials were prepared by mixing and hot-pressing process, and they were processed into the micro-slit panel. Then, the multi-layer structural sound absorption composite materials were prepared sequentially by micro-slit panel, air cavity, and flax felt. Finally, the sound absorption properties of the multi-layer structural composite materials were studied by changing flax felt thickness, air cavity depth, slit rate, and thickness of micro-slit panel. As the flax felt thickness varied from 0 to 10 mm in 5 mm increments, the peak of sound absorption coefficient shifted to low frequency. The sound absorption coefficient in the low frequency was improved with the air cavity depth varied from 0 to 10 mm in 5 mm increments. With the slit rate increased from 3% to 7% in 2% increments, the peak of sound absorption coefficient shifted to high frequency. With the thickness of micro-slit panel increased from 2 to 6 mm in 2 mm increments, the sound absorption bandwidth was broaden, and the peak of sound absorption coefficient was increased and shifted to low frequency. Results showed that the highest sound absorption coefficient of the multi-layer structural composite materials was about 1 under the optimal process conditions.

Preparation and Sound Absorption Coefficient Test of Aluminum Foam with CaO Granules Infiltrating Agent

2018 ◽  
Vol 933 ◽  
pp. 55-60
Author(s):  
Yong Zhang ◽  
Zong Min Chen ◽  
Zhao Jun Wang ◽  
Jing Hui Liu
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Aluminum Foam ◽  
Low Frequency ◽  
Processing Parameters ◽  
Sound Absorption Coefficient ◽  
Pressure Infiltration ◽  
Pure Alcohol ◽  
Infiltration Pressure ◽  
High Sound

Three kinds of aluminum foam of different pore sizes were prepared with a tailor-made low-pressure infiltration device. CaO granules in three sizes (0.45~0.71mm,0.71~090mm and 1.25~1.60mm) were selected as infiltrating agents. The processing parameters were as follows: granules preheat temperature of 700 °C,infiltration pressure of 0.04 MPa and aluminum liquid temperature of 720 °C. In order to improve the removal performance and porosity, mixture of CaO powder of finer than 300 mesh and pure alcohol was mixed uniformly with granules, which made the slurry-coating granules conformal contacts rather than point contacts as in the traditional infiltration method. The testing results show that among all aluminum foam specimens tested with transfer function methods, two kinds have high sound absorption coefficient in low frequency (250~1600Hz).

Nanomaterials in PU Foam for Enhanced Sound Absorption at Low Frequency Region

2014 ◽  
Vol 938 ◽  
pp. 170-175 ◽  
Author(s):  
R. Gayathri ◽  
R. Vasanthakumari
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Foam Cell ◽  
Research Work ◽  
Low Frequency ◽  
Absorption Capacity ◽  
Polyurethane Foams ◽  
Sound Absorption Coefficient ◽  
Enhanced Absorption ◽  
Pu Foam

Lot of research is going on to develop materials suitable for absorbing sound and reducing noise. By virtue of their superior vibration damping capability and attractive characteristics such as visco elasticity, simple processing and commercial availability, polyurethane foams are extensively applied not only in automotive seats but also in various acoustical parts. However, the sound absorption coefficient of polyurethane foams is high (0.8 1.0) in high frequencies in the range 300 to 10000Hz while it is found to be low (0 to 0.5) at low frequencies (10 to 200 Hz). In this study new polyurethane based porous composites were synthesized by in situ foam rising polymerization of polyol and diisocyanate in the presence of fillers such as nanosilica (NS) and nanoclay (NC). The effect of these fillers at various concentrations up to 2% was studied for sound absorption characteristics in the frequency range 100-200Hz. Sound absorption coefficient was determined using standing wave impedance tube method. The sound absorption coefficient of filled PU foams increases from 0.5 to 0.8 with frequency increase from 100 to 200 Hz at higher content of the nanofillers employed. This research work is further extended to study the sound absorption capacity of unfilled PU foam with varying thickness and also hybrid foams with woven glass (GFC) and polyester cloth (PEC). The unfilled foam with 60mm of thickness gives sound absorption value same as that of 15mm of filled foam. Further enhanced absorption value is achieved with PU/NS-GFC hybrid. The results obtained are explained based on the porosity of composite structure and foam cell size.Key words Polyurethane foam, sound absorption coefficient, nanosilica, nanoclay, low frequency sound.

scholarly journals Synthesis and Evaluation of Polyurethane Foam Composites for Enhanced Sound Absorption at Low Frequency

2019 ◽  
Vol 8 (3) ◽  
pp. 6815-6818
Keyword(s):  
Absorption Coefficient ◽  
Polyurethane Foam ◽  
Sound Absorption ◽  
Low Frequency ◽  
Weight Fraction ◽  
Crumb Rubber ◽  
Polyurethane Foams ◽  
Sound Absorption Coefficient ◽  
Filler Materials ◽  
Frequency Range

Polyurethane foams are extensively used as sound absorbing materials in various automobile parts. However, the sound absorption capability of polyurethane foam ispoorin low frequency range. The advancement of technologies to develop newerpolymer composites, provide scope to develop composite polyurethane foam with better sound absorption coefficient in low frequency range. Composite foams are made with two different filler materials as crumb rubber and coconut fiber, in varying weight fraction of up to 2.0%. Density, Sound absorption coefficient, and Noise reduction, measurements were done on all polyurethane foams. The effect offiller additionsto polyurethane foams ondensity and sound absorption coefficient at low frequency are discussed.The 1.4 % crumb rubber polyurethane foam offers the best combination of low density, improved sound absorption coefficient value and noise absorption at low frequency.

Sign in / Sign up

Export Citation Format

Share Document