Water Reclamation From High Moisture Content Waste Heat Streams

2011 ◽  
Author(s):  
Dexin Wang ◽  
William Liss ◽  
Ainan Bao
Keyword(s):  
Water Vapor ◽  
Low Temperature ◽  
Moisture Content ◽  
Waste Heat ◽  
Separation Mechanism ◽  
Water Reclamation ◽  
Water Recovery ◽  
High Moisture Content ◽  
High Moisture ◽  
Makeup Water

A new waste heat and water recovery technology based on a nanoporous ceramic membrane water vapor separation mechanism was developed, to extract the water vapor and its latent heat from low temperature high moisture content waste gas streams. For the water reclamation process, water vapor condenses inside the membrane pores and passes through to the permeate side which is in direct contact with a low-temperature water stream. Contaminants such as CO2, O2, NOx, and SO2 are inhibited from passing through the membrane by its high selectivity. The recovered water is of high quality and mineral free, therefore can be used as supplemental makeup water for almost all industrial processes. The membrane based technology has been first developed and demonstrated for industrial boiler flue gas heat and water recovery. Now it is being developed for wider applications, from residential humidification, commercial laundry, biomass production to utility boilers. The increased application areas will greatly enhance waste heat and water recovery potentials worldwide, to save both energy and water, and benefit the global environment. In this paper, the technology development process, and several demonstrations for different applications are discussed in details.

Drying kinetics of processed natural coffee with high moisture content

2017 ◽  
Vol 12 (3) ◽  
pp. 400 ◽  
Author(s):  
Valdiney Cambuy Siqueira ◽  
Flávio Meira Borém ◽  
Guilherme Euripedes Alves ◽  
Eder Pedroza Isquierdo ◽  
Afonso Celso Ferreira Pinto ◽  
...  
Keyword(s):  
Moisture Content ◽  
Drying Kinetics ◽  
High Moisture Content ◽  
High Moisture ◽  
Kinetics Of

Objetivou-se, com o presente trabalho, propor um novo método de processamento e secagem, assim como avaliar o comportamento dos grãos submetidos a este processo, por meio da taxa de redução de água e do ajuste de diferentes modelos matemáticos aos dados experimentais da secagem. Os frutos colhidos no estágio maduro foram divididos em três lotes. O primeiro foi seco continuamente à temperatura de 40±1 °C. O segundo consiste na secagem do café natural até os teores de água de 0,56±0,02, 0,41±0,02, 0,28±0,02 e 0,20±0,02 decimal (base seca, b.s.), seguido de beneficiamento e secagem contínua nas temperaturas de 35±1 ºC e 40±1 ºC. O terceiro lote correspondeu à secagem contínua do café descascado e desmucilado na temperatura de 40±1 °C. Em todos os lotes, a secagem foi encerrada quando os grãos atingiram o teor de água de 0,12±0,05 (b.s.). Aos dados experimentais da secagem foram ajustados dez modelos matemáticos utilizados para representação da secagem dos produtos agrícolas. Além da representação da cinética de secagem foi avaliada a taxa de redução de água dos grãos. Conclui-se que a taxa de redução de água é maior para a temperatura de secagem de 40±1 °C, especialmente para maiores teores de água. O tempo total de secagem do café beneficiado com alto teor de água é expressivamente reduzido, quando comparado ao tempo de secagem completa do café natural. O modelo de Midilli descreve satisfatoriamente a cinética de secagem do café beneficiado.

Optimization of drying of low-grade coal with high moisture content using a disc dryer

2014 ◽  
Vol 124 ◽  
pp. 267-274 ◽  
Author(s):  
Seung-Hyun Moon ◽  
In-Soo Ryu ◽  
Seung-Jae Lee ◽  
Tae-In Ohm
Keyword(s):  
Moisture Content ◽  
Low Grade ◽  
High Moisture Content ◽  
High Moisture

scholarly journals Drying characteristics of sludge in a rotary drum for fast-drying application

2020 ◽  
pp. 303-303
Author(s):  
Yongli Xiao ◽  
Hualin Wang ◽  
Shengan Deng ◽  
Fuyong Su ◽  
Zhi Wen
Keyword(s):  
Moisture Content ◽  
Waste Heat ◽  
Mass Transfer Rate ◽  
High Heat ◽  
Current Treatment ◽  
High Moisture ◽  
Treatment Technology ◽  
Rotary Drum ◽  
Low Efficiency ◽  
Steel Balls

High-temperature metallurgical slag (temperature, > 1450 ?C) and high-moisture sludge (moisture content, > 80 wt%) are common wastes with huge outputs. Many problems, such as high cost, low level of harmlessness, and low efficiency, are encountered in current treatment methods. If these wastes can be recycled, they can be valuable secondary resources. Therefore, using the drum apparatuses to treat these two kinds of wastes is proposed. The process uses waste heat of slag to dry sludge with high moisture content and is a kind of alternative circulation treatment technology in which steel balls are used as ball milling media and intermediate heat carriers. Besides, this technology can break up slag or sludge in real time, thereby ensuring high heat or mass transfer rate. This study presents an experimental investigation of the dynamic drying process of wet sludge mixed with hot steel balls in a rotary drum. The relationship of operation parameters (including sludge moisture content, sludge treatment mass, steel ball diameter, and rotary speed of drum) and drying effect is obtained. There are three kinds of final drying results: completely dried to powder, few sludge agglomerations, and sludge-to-wall adhesion. If the operating parameters are set well, the sludge could be efficiently and completely dried and eventually in powder form.

scholarly journals Key Metallurgical Parameters of Fe-Ni Production During 1984–1997 and 2007–2017 at the Ferronickel Smelter in Drenas

2020 ◽  
Vol 67 (2) ◽  
pp. 73-77
Author(s):  
Zarife Bajraktari-Gashi ◽  
Muharrem Zabeli ◽  
Behram Halilaj
Keyword(s):  
Moisture Content ◽  
Casting Process ◽  
The Philippines ◽  
High Moisture Content ◽  
High Moisture ◽  
Nickel Ores ◽  
Iron Nickel ◽  
Rotary Kilns ◽  
The Republic ◽  
Laterite Ore

AbstractDuring 1984–1997, the ferronickel plant in Drenas used iron-nickel ore from the mines of the Republic of Kosovo: Glavica and Çikatove (Dushkaje and Suke) mines. However, during the years 2007–2017, when the plant started operating from the cessation of production, which was from 1998 to 2007, some types of iron-nickel ores from different countries began to be used, starting from iron-nickel ores from Kosovo, iron-nickel ores from Albania, ores from Indonesia, ores from the Philippines, ores from Guatemala, ores from Turkey and ores from Macedonia. The ore composition, however, is mainly oxide-laterite ore. Iron-nickel ores in the plant are characterised by high moisture content, a very important factor influencing the process of scraping the charge in rotary kilns and presenting in general. Among the iron-nickel ore used in the ferronickel plant, the ores from Albania are characterised due to their low moisture content when compared with the other ores as well as the high content of iron oxides, which affect the temperature rise inside the furnaces, as the iron ores play an important role in the pre-casting process in rotary kilns.

scholarly journals Mycoflora of sawn timbers in Benin City

2014 ◽  
Vol 23 (2) ◽  
pp. 89-95
Author(s):  
J. A. Okhuoya ◽  
S. O. Itaman
Keyword(s):  
Moisture Content ◽  
Pleurotus Ostreatus ◽  
Fungal Species ◽  
High Moisture Content ◽  
High Moisture ◽  
Benin City ◽  
The Poor ◽  
High Incidence

In a fungal suryey of sawn timbers in scattared localities in Benin City, fungal species isolated were mainly members of <i>Hyphomycetes</i>, with few <i>Ascomycetes</i> and<i> Basidiomycetes</i>. Cellulolytic abilities of isolates were determined and found to be highest in a basidiomycete, <i>Pleurotus ostreatus</i>. The high incidence of these isolates was traced to the poor ventillation in the shades where the timbers arę sold and the high moisture content of timber before display for sale.

Sign in / Sign up

Export Citation Format

Share Document