Early-Stage Evolution of Electrons Emitted From Metal Target Surface During Ultrashort Laser Ablation in Vacuum

2011 ◽  
Author(s):  
Sha Tao ◽  
Benxin Wu
Keyword(s):  
Heat Transfer ◽  
Laser Ablation ◽  
Electric Field ◽  
Early Stage ◽  
Research Work ◽  
Target Surface ◽  
Electron Mass ◽  
Metal Target ◽  
Free Electron Density ◽  
Ultrashort Laser

The early-stage evolution of electrons emitted from a metal target surface during ultrashort laser ablation in vacuum has been studied using a physics-based model. This kind of research work has been rarely reported in literature. In the model, the target heat transfer process is simulated by solving the two-temperature heat transfer equations, based on which the photoemission and thermionic emission of electrons from the target surface are calculated. The early-stage evolution of emitted electrons is described by solving the electron mass, momentum, and energy conservation equations, coupled with the Poisson’s equation that governs the developed electric field. The study shows that a relatively very high free electron density can be developed near the target surface, and the front of emitted electrons propagates very fast into the vacuum. The developed electric field strongly affects the evolution of emitted electrons. Using the physics-based model, the temporal variation and the spatial distribution of the emitted electron number density, and velocity will be studied and discussed. The early-stage evolution of the emitted electrons may affect the possible subsequent hydrodynamic motion in the target, and the resulted plasma formation and material removal (laser ablation) processes. Therefore, this study provides very useful information for the understanding of ultrashort laser-material interaction, laser-induced plasma, laser ablation (machining), and other relevant processes.

Early-stage plasma dynamics with air ionization during ultrashort laser ablation of metal

2011 ◽  
Vol 18 (9) ◽  
pp. 093302 ◽  
Author(s):  
Wenqian Hu ◽  
Yung C. Shin ◽  
Galen King
Keyword(s):  
Laser Ablation ◽  
Early Stage ◽  
Plasma Dynamics ◽  
Air Ionization ◽  
Ultrashort Laser

WINGLET-PAIR TARGET SURFACE ROUGHNESS INFLUENCES ON IMPINGEMENT JET ARRAY HEAT TRANSFER

2019 ◽  
Vol 26 (1) ◽  
pp. 15-35 ◽  
Author(s):  
Phillip Ligrani ◽  
Patrick McInturff ◽  
Masaaki Suzuki ◽  
Chiyuki Nakamata
Keyword(s):  
Heat Transfer ◽  
Surface Roughness ◽  
Target Surface ◽  
Impingement Jet ◽  
Jet Array

scholarly journals Electric field control of radiative heat transfer in a superconducting circuit

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Olivier Maillet ◽  
Diego Subero ◽  
Joonas T. Peltonen ◽  
Dmitry S. Golubev ◽  
Jukka P. Pekola
Keyword(s):  
Heat Transfer ◽  
Electric Field ◽  
Radiative Heat Transfer ◽  
Radiative Heat ◽  
Superconducting Circuit ◽  
Field Control

scholarly journals Approximate Analytical Analysis of Unsteady MHD Mixed Flow of Non-Newtonian Hybrid Nanofluid over a Stretching Surface

Fluids ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 138
Author(s):  
Ali Rehman ◽  
Zabidin Salleh
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Base Fluid ◽  
Research Work ◽  
Hybrid Nanofluid ◽  
Stretching Surface ◽  
Optimal Homotopy Analysis Method ◽  
Analytical Analysis ◽  
Transfer Ratio ◽  
The Impact

This paper analyses the two-dimensional unsteady and incompressible flow of a non-Newtonian hybrid nanofluid over a stretching surface. The nanofluid formulated in the present study is TiO2 + Ag + blood, and TiO2 + blood, where in this combination TiO2 + blood is the base fluid and TiO2 + Ag + blood represents the hybrid nanofluid. The aim of the present research work is to improve the heat transfer ratio because the heat transfer ratio of the hybrid nanofluid is higher than that of the base fluid. The novelty of the recent work is the approximate analytical analysis of the magnetohydrodynamics mixed non-Newtonian hybrid nanofluid over a stretching surface. This type of combination, where TiO2+blood is the base fluid and TiO2 + Ag + blood is the hybrid nanofluid, is studied for the first time in the literature. The fundamental partial differential equations are transformed to a set of nonlinear ordinary differential equations with the guide of some appropriate similarity transformations. The analytical approximate method, namely the optimal homotopy analysis method (OHAM), is used for the approximate analytical solution. The convergence of the OHAM for particular problems is also discussed. The impact of the magnetic parameter, dynamic viscosity parameter, stretching surface parameter and Prandtl number is interpreted through graphs. The skin friction coefficient and Nusselt number are explained in table form. The present work is found to be in very good agreement with those published earlier.

scholarly journals Electric Field Assisted Femtosecond Laser Preparation of Au@TiO2 Composites with Controlled Morphology and Crystallinity for Photocatalytic Degradation

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3816
Author(s):  
Xiaojie Li ◽  
Xin Li ◽  
Pei Zuo ◽  
Xiaozhe Chen ◽  
Misheng Liang ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Electric Field ◽  
Photocatalytic Degradation ◽  
Au Nanoparticles ◽  
High Efficiency ◽  
Free Electron Density ◽  
Pulse Delay ◽  
Dye Pollutants ◽  
Amorphous Tio2 ◽  
Laser Liquid

TiO2 is popular in photocatalytic degradation dye pollutants due to its abundance and its stability under photochemical conditions. Au loaded TiO2 can achieve efficient absorption of visible light and deal with the problem of low conversion efficiency for solar energy of TiO2. This work presents a new strategy to prepare Au nanoparticles-loaded TiO2 composites through electric−field−assisted temporally−shaped femtosecond laser liquid-phase ablation of Au3+ and amorphous TiO2. By adjusting the laser pulse delay and electric field parameters, gold nanoparticles with different structures can be obtained, such as nanospheres, nanoclusters, and nanostars (AuNSs). AuNSs can promote the local crystallization of amorphous TiO2 in the preparation process and higher free electron density can also be excited to work together with the mixed crystalline phase, hindering the recombination between carriers and holes to achieve efficient photocatalytic degradation. The methylene blue can be effectively degraded by 86% within 30 min, and much higher than the 10% of Au nanoparticles loaded amorphous TiO2. Moreover, the present study reveals the crystallization process and control methods for preparing nanoparticles by laser liquid ablation, providing a green and effective new method for the preparation of high-efficiency photocatalytic materials.

scholarly journals Large-Eddy Simulation Study of Flow and Heat Transfer in Swirling and Non-Swirling Impinging Jets on a Semi-Cylinder Concave Target

2021 ◽  
Vol 11 (15) ◽  
pp. 7167
Author(s):  
Liang Xu ◽  
Xu Zhao ◽  
Lei Xi ◽  
Yonghao Ma ◽  
Jianmin Gao ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Large Eddy Simulation ◽  
Wall Temperature ◽  
Target Surface ◽  
Impinging Jets ◽  
Small Scale ◽  
Complex Flow ◽  
Eddy Simulation ◽  
Flow And Heat Transfer ◽  
Large Eddy

Swirling impinging jet (SIJ) is considered as an effective means to achieve uniform cooling at high heat transfer rates, and the complex flow structure and its mechanism of enhancing heat transfer have attracted much attention in recent years. The large eddy simulation (LES) technique is employed to analyze the flow fields of swirling and non-swirling impinging jet emanating from a hole with four spiral and straight grooves, respectively, at a relatively high Reynolds number (Re) of 16,000 and a small jet spacing of H/D = 2 on a concave surface with uniform heat flux. Firstly, this work analyzes two different sub-grid stress models, and LES with the wall-adapting local eddy-viscosity model (WALEM) is established for accurately predicting flow and heat transfer performance of SIJ on a flat surface. The complex flow field structures, spectral characteristics, time-averaged flow characteristics and heat transfer on the target surface for the swirling and non-swirling impinging jets are compared in detail using the established method. The results show that small-scale recirculation vortices near the wall change the nearby flow into an unstable microwave state, resulting in small-scale fluctuation of the local Nusselt number (Nu) of the wall. There is a stable recirculation vortex at the stagnation point of the target surface, and the axial and radial fluctuating speeds are consistent with the fluctuating wall temperature. With the increase in the radial radius away from the stagnation point, the main frequency of the fluctuation of wall temperature coincides with the main frequency of the fluctuation of radial fluctuating velocity at x/D = 0.5. Compared with 0° straight hole, 45° spiral hole has a larger fluctuating speed because of speed deflection, resulting in a larger turbulence intensity and a stronger air transport capacity. The heat transfer intensity of the 45° spiral hole on the target surface is slightly improved within 5–10%.

scholarly journals Investigations of Flow and Heat Transfer Characteristics in a Channel Impingement Cooling Configuration with a Single Row of Water Jets

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4327
Author(s):  
Min-Seob Shin ◽  
Santhosh Senguttuvan ◽  
Sung-Min Kim
Keyword(s):  
Heat Transfer ◽  
Local Heat Transfer ◽  
Target Surface ◽  
Channel Height ◽  
Heat Transfer Characteristics ◽  
Transfer Coefficients ◽  
Impingement Cooling ◽  
Average Heat ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

The present study experimentally and numerically investigates the effect of channel height on the flow and heat transfer characteristics of a channel impingement cooling configuration for various jet Reynolds numbers in the range of 2000–8600. A single array consisting of eleven jets with 0.8 mm diameter injects water into the channel with 2 mm width at four different channel heights (3, 4, 5, and 6 mm). The average heat transfer coefficients at the target surface are measured by maintaining a temperature difference between the jet exit and the target surface in the range of 15–17 °C for each channel height. The experimental results show the average heat transfer coefficient at the target surface increases with the jet Reynolds number and decreases with the channel height. An average Nusselt number correlation is developed based on 85 experimentally measured data points with a mean absolute error of less than 4.31%. The numerical simulation accurately predicts the overall heat transfer rate within 10% error. The numerical results are analyzed to investigate the flow structure and its effect on the local heat transfer characteristics. The present study advances the primary understanding of the flow and heat transfer characteristics of the channel impingement cooling configuration with liquid jets.

Sign in / Sign up

Export Citation Format

Share Document