Finite Element Study of Spinal Cord Mechanics During Biomechanical Response of Middle Cervical Spine

Author(s):  
N. Bahramshahi ◽  
H. Ghaemi ◽  
K. Behdinan

The present study is conducted to develop a detailed FE model of spinal cord and to study its behaviour under various loading conditions. To achieve the goal, a previously developed and validated FE model of the middle cervical spine (C3-C5) is utilized. The model is further modified to investigate the stresses that the spinal cord in experiences during cervical spine motion segment in compression and flexion/extension loading modes. The resulting Von Misses stress and axial strain of the anterior and posterior surfaces of the cervical spinal cord are obtained from a set of elements along the C4-C5 disc space of the dural sheath, CSF and cord. The results show that in compression, the anterior surface of spinal cord experiences larger displacement, stress, and strain than those of the posterior surface. Conversely, the analyses show that in flexion\extension, the stresses, strains, and displacements are more pronounced in posterior segment of the spinal cord. In extension, the posterior disc bulge applies pressure onto the Posterior Longitudinal Ligament and thereby, applying local pressure on the spinal cord. The FE results show a stress concentration at the point of contact between disc and spinal cord. Furthermore, the FE results of flexion test show similar stress concentration characteristic at the point of contact. However, the local stress on spinal cord is more pronounced in flexion than extension at the C4-C5 area of spinal cord. It was also determined the compressive load resulted in the highest stress concentration on the spinal cord.

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Fan Xue ◽  
Zujiang Chen ◽  
Han Yang ◽  
Taijun Chen ◽  
Yikai Li

Abstract Background Little information is available concerning the biomechanism involved in the spinal cord injury after cervical rotatory manipulation (CRM). The primary purpose of this study was to explore the biomechanical and kinematic effects of CRM on a healthy spinal cord. Methods A finite element (FE) model of the basilaris cranii, C1–C7 vertebral bodies, nerve root complex and vertebral canal contents was constructed and validated against in vivo and in vitro published data. The FE model simulated CRM in the flexion, extension and neutral positions. The stress distribution, forma and relative position of the spinal cord were observed. Results Lower von Mises stress was observed on the spinal cord after CRM in the flexion position. The spinal cord in CRM in the flexion and neutral positions had a lower sagittal diameter and cross-sectional area. In addition, the spinal cord was anteriorly positioned after CRM in the flexion position, while the spinal cord was posteriorly positioned after CRM in the extension and neutral positions. Conclusion CRM in the flexion position is less likely to injure the spinal cord, but caution is warranted when posterior vertebral osteophytes or disc herniations exist.


Author(s):  
Marie-Helene Beausejour ◽  
Eric Wagnac ◽  
Pierre-Jean Arnoux ◽  
Jean-Marc Mac-Thiong ◽  
Yvan Petit

Abstract Flexion-distraction injuries frequently cause traumatic cervical spinal cord injury (SCI). Post-traumatic instability can cause aggravation of the secondary SCI during patient's care. However, there is little information on how the pattern of disco-ligamentous injury affects the SCI severity and mechanism. This study objective was to analyze how different flexion-distraction disco-ligamentous injuries affect the SCI mechanisms during post-traumatic flexion and extension. A cervical spine finite element model including the spinal cord was used and different combinations of partial or complete intervertebral disc (IVD) rupture and disruption of various posterior ligaments were modeled at C4-C5, C5-C6 or C6-C7. In flexion, complete IVD rupture combined with posterior ligamentous complex rupture was the most severe injury leading to the most extreme von Mises stress (47 to 66 kPa), principal strains p1 (0.32 to 0.41 in white matter) and p3 (-0.78 to -0.96 in white matter) in the spinal cord and to the most important spinal cord compression (35 to 48 %). The main post-trauma SCI mechanism was identified as compression of the anterior white matter at the injured level combined with distraction of the posterior spinal cord during flexion. There was also a concentration of the maximum stresses in the gray matter after injury. Finally, in extension, the injuries tested had little impact on the spinal cord. The capsular ligament was the most important structure in protecting the spinal cord. Its status should be carefully examined during patient's management.


1997 ◽  
Vol 10 (1) ◽  
pp. 63-102 ◽  
Author(s):  
N. Colombo ◽  
C. Maccagnano ◽  
C. Corona ◽  
A. Beltramello ◽  
G. Scialfa

Injury to the cervical spinal cord is a major health problem owing to its frequency and to the often devastating sequelae of serious trauma with respect to long-term disability for the patient. Cervical injuries are often reported in association with head trauma and cervical spinal cord injury appears to be a major contributing factor in acute death secondary to traffic accidents producing severe head injuries. A high incidence of neurological deficits is reported in cervical spinal trauma, but cervical injuries can escape detection in the acute phase if clinically silent or in patients unconscious from to head trauma. The most important predisposing factor in the concomitant occurrence of head and neck trauma is transmission of forces through the cranial vault to the cervical spine. Other underlying cervical spine diseases, either congenital or developmental, may also predispose to the development of cervical injuries. The spine includes bony-ligamentous structures and nervous structures. The bony-ligamentous involucre is anatomically predisposed to perform three major tasks: 1) maintenance of spinal statics; 2) mobilization in the three anatomic planes and 3) protection of nervous and vascular structures inside the spinal canal. The cervical spine is subjected to varying forces of flexion, flexion-rotation, extension and vertical compression which result in damage to the different components of the spine when they are applied beyond physiological limits. Biomechanical considerations of the different motion patterns that occur in the cervical spine are essential to understand the contribution of mechanical stresses to the development of specific spinal injuries. This chapter tackles the problem of a logical management of cervical spinal trauma based on clinical presentation to: a) identify the preferential diagnostic modality to investigate that type of injury (conventional X-Ray, Computed Tomography, Magnetic Resonance); b) interpret images, indipendently from the diagnostic modality utilized, considering the cause-effect relation between the traumatic force and the anatomic-functional structures involved by the trauma. The clinical picture may include pain, movement limitations and/or radiculo-myelopathy. Cerebral neurologic deficits can be the consequence of traumatic damage to the carotid and vertebral artery system in the neck. Evaluation of injury instability is one of the main goals of radiographic investigation. One classifies bony instability which is temporary, as opposed to disco-ligamentous instability which is permanent and usually requires surgical stabilization, and mixed instability. Conventional lateral and antero-posterior radiographs should be initially performed in patients with cervical trauma and in polytrauma and comatous patients who are difficult to assess clinically. They effectively screen vertebral fractures, vertebral body and facet dislocations and pre-vertebral soft tissue swelling. However, ligament disruption and instability can be underestimated by a normal disco-vertebral alignment. Dynamic flexion-extension views, useful to reveal such an instability, should never be performed in the acute phase particularly if fractures and neurologic deficits are present. CT scan, in addition, has several advantages: the axial plane provides an optimal view of the size and shape of the spinal canal, bony fragments and foreign bodies within the canal are very well depicted, posterior element fractures are better visualized. A preexsisting spondylotic narrow canal is well evaluated by CT as are post-traumatic disc herniations. Widening of the apophyseal joints, suggesting disruption of facet capsules and spinal instability, is best demonstrated by CT. However, CT has some limitations in evaluating ligament instability since it is performed in the neutral position and, in addition, it cannot visualize the medulla and its potential traumatic lesions. After the introduction of MRI, myelography and CT-myelography are no longer used to investigate cervical spine lesions involving cord and nerve roots. MRI should be performed in every patient presenting with neurologic deficits. The usefulness of MR is in detecting extradural compressive lesions like disc herniation and haematomas that need to be decompressed surgically. MRI can also evaluate ligamentous integrity and disk rupture. Bony fractures are revealed by MRI either by signal or morphologic alterations of vertebral bodies, but thin, linear fractures are less well identified than with CT. One of the main advantages of MRI is the direct identification of intrinsic cord pathology such as cord contusion and haemorrhage. Cord haemorrhage seems to be predictive of a complete lesion and of poor outcome. Therefore MRI is proposed to assess the prognosis of traumatic cord lesions, the best time for imaging ranging between 24 and 72 hours after injury.


2010 ◽  
Vol 45 (1) ◽  
pp. 39-43 ◽  
Author(s):  
Michael Higgins ◽  
Ryan T. Tierney ◽  
Jeffrey B. Driban ◽  
Steven Edell ◽  
Randall Watkins

Abstract Context: Removal of the lacrosse helmet to achieve airway access has been discouraged based only on research in which cervical alignment was examined. No researchers have examined the effect of lacrosse equipment on the cervical space available for the spinal cord (SAC). Objective: To determine the effect of lacrosse equipment on the cervical SAC and cervical-thoracic angle (CTA) in the immobilized athlete. Design: Observational study. Setting: Outpatient imaging center. Patients or Other Participants: Ten volunteer lacrosse athletes (age  =  20.7 ± 1.87 years, height  =  180.3 ± 8.3 cm, mass  =  91 ± 12.8 kg) with no history of cervical spine injury or disease and no contraindications to magnetic resonance imaging (MRI). Intervention(s): The lacrosse players were positioned supine on a spine board for all test conditions. An MRI scan was completed for each condition. Main Outcome Measure(s): The independent variables were condition (no equipment, shoulder pads only [SP], and full gear that included helmet and shoulder pads [FG]), and cervical spine level (C3–C7). The dependent variables were the SAC and CTA. The MRI scans were evaluated midsagittally. The average of 3 measures was used as the criterion variable. The SAC data were analyzed using a 3 × 5 analysis of variance (ANOVA) with repeated measures. The CTA data were analyzed with a 1-way repeated-measures ANOVA. Results: We found no equipment × level interaction effect (F3.7,72  =  1.34, P  =  .279) or equipment main effect (F2,18  =  1.20, P  =  .325) for the SAC (no equipment  =  5.04 ± 1.44 mm, SP  =  4.69 ± 1.36 mm, FG  =  4.62 ± 1.38 mm). The CTA was greater (ie, more extension; critical P  =  .0167) during the SP (32.64° ± 3.9°) condition than during the no-equipment (25.34° ± 2.3°; t9  =  7.67, P  =  .001) or FG (26.81° ± 5.1°; t9  =  4.80, P  =  .001) condition. Conclusions: Immobilizing healthy lacrosse athletes with shoulder pads and no helmets affected cervical spine alignment but did not affect SAC. Further research is needed to determine and identify appropriate care of the lacrosse athlete with a spine injury.


Author(s):  
Mozammil Hussain ◽  
Raghu N. Natarajan ◽  
Gunnar B. J. Andersson ◽  
Howard S. An

Degenerative changes in the cervical spine due to aging are very common causes of neck pain in general population. Although many investigators have quantified the gross morphological changes in the disc with progressive degeneration, the biomechanical changes due to degenerative pathologies of the disc and its effect on the adjacent levels are not well understood. Despite many in vivo and in vitro techniques used to study such complex phenomena, the finite element (FE) method is still a powerful tool to investigate the internal mechanics and complex clinical situations under various physiological loadings particularly when large numbers of parameters are involved. The objective of the present study was to develop and validate a poroelastic FE model of a healthy C3-T1 segment of the cervical spine under physiologic moment loads. The model included the regional effect of change in the fixed charged density of proteoglycan concentration and change in the permeability and porosity due to change in the axial strain of disc tissues. The model was further modified to include various degrees of disc degeneration at the C5-C6 level. Outcomes of this study provided a better understanding on the progression of degeneration along the cervical spine by investigating the biomechanical response of the adjacent segments with an intermediate degenerated C5-C6 level.


2009 ◽  
Vol 10 (4) ◽  
pp. 366-373 ◽  
Author(s):  
Kern H. Guppy ◽  
Mark Hawk ◽  
Indro Chakrabarti ◽  
Amit Banerjee

The authors present 2 cases involving patients who presented with myelopathy. Magnetic resonance imaging of the cervical spine showed spinal cord signal changes on T2-weighted images without any spinal cord compression. Flexion-extension plain radiographs of the spine showed no instability. Dynamic MR imaging of the cervical spine, however, showed spinal cord compression on extension. Compression of the spinal cord was caused by dynamic anulus bulging and ligamentum flavum buckling. This report emphasizes the need for dynamic MR imaging of the cervical spine for evaluating spinal cord changes on neutral position MR imaging before further workup for other causes such as demyelinating disease.


2021 ◽  
pp. 1-13
Author(s):  
Waseem Ur Rahman ◽  
Wei Jiang ◽  
Guohua Wang ◽  
Zhijun Li

BACKGROUND: The finite element method (FEM) is an efficient and powerful tool for studying human spine biomechanics. OBJECTIVE: In this study, a detailed asymmetric three-dimensional (3D) finite element (FE) model of the upper cervical spine was developed from the computed tomography (CT) scan data to analyze the effect of ligaments and facet joints on the stability of the upper cervical spine. METHODS: A 3D FE model was validated against data obtained from previously published works, which were performed in vitro and FE analysis of vertebrae under three types of loads, i.e. flexion/extension, axial rotation, and lateral bending. RESULTS: The results show that the range of motion of segment C1–C2 is more flexible than that of segment C2–C3. Moreover, the results from the FE model were used to compute stresses on the ligaments and facet joints of the upper cervical spine during physiological moments. CONCLUSION: The anterior longitudinal ligaments (ALL) and interspinous ligaments (ISL) are found to be the most active ligaments, and the maximum stress distribution is appear on the vertebra C3 superior facet surface under both extension and flexion moments.


Author(s):  
Marina Putilina ◽  
Nataliya Teplova ◽  
Anton Dvornikov

: Cobb Syndrome (Spinal Arteriovenous Metameric Syndrome 1-31 (SAMS 1-31)) is a rare, non-hereditary disorder. Approximately 100 cases of CS have been described to date. The actual incidence may be much higher since only symptomatic patients were documented. In particular, post mortem studies suggest a possibly higher incidence of this syndrome. The main clinical manifestations of this syndrome include skin stains of vascular nature on the torso, in combination with spinal vascular malformations localized in one and the same metameric or spinal segment. A rare diagnosis of this syndrome in patients over 18 is probably related to the fact that the disease may be asymptomatic throughout a long period of time [3], while patients may tend to disregard the skin lesions [5,6]. As a result, most publications on this pathology are based on separate case reports [7-9]. Significant variability of clinical manifestations as well as prolonged progress of the disease often cause errors in diagnosis. What follows is a case report of a young patient with Cobb Syndrome, who was admitted to a regional vascular centre with a misdiagnosis of stroke. 20 patients of young age (from 20 to 35 years old), with a diagnosis of stroke, who were admitted to a University Clinic (of the Russian National Research Medical University Named After Pirogov N.I., Moscow). Among this group of patients, a patient with Cobb syndrome was identified. Patient P., of 22 years, presented with acute, intensive cervical spinal pain, predominantly on the right, numbness and weakness in the arms and legs. About 3 weeks before admission to the hospital the patient had ARVI with a fever of up to 37.5°C: two weeks before the onset of symptoms he had undergone extirpation of 2 teeth, for which reason he spent over 2 hours in a forced position with his head thrown back (prolonged overextension in the cervical spine). Multiple skin angiomas on the chest spreading to the shoulder and scapula region. Tetraparesis up to 4 points: tetraparesis in hands with low muscle tone, low reflexes, tetraparesis in legs with high muscle tone, high reflexes. Foot clonus when causing Achilles reflexes. Tremor in the extremities. No plantar reflex pathology detected. Sensitivity disorders in the hands – "the high gloves". No pelvic disorders detected. Given the presence and exacerbation of neurological symptoms and cutaneous angiomas MRI with contrast agent of the cervical spine was recommended. MRimage of an advanced arteriovenous malformation (AVM) of the cervical spinal cord with signs of gliosis and spinal cord oedema at the С2 – С7 level. Endovascular embolization of the AVM in cervical spinal cord was performed. The treatment led to complete reversal of neurological symptoms. In the presence of skin lesions the diagnosis of CS does not present particular difficulties, so in children and young patients with skin angiomatosis it is advisable to conduct a comprehensive examination using selective spinal angiography or MR angiography to exclude arteriovenous malformations in spinal cord.


2021 ◽  
Author(s):  
Benjamin C. Gadomski ◽  
Bradley J. Hindman ◽  
Mitchell I. Page ◽  
Franklin Dexter ◽  
Christian M. Puttlitz

Background In a closed claims study, most patients experiencing cervical spinal cord injury had stable cervical spines. This raises two questions. First, in the presence of an intact (stable) cervical spine, are there tracheal intubation conditions in which cervical intervertebral motions exceed physiologically normal maximum values? Second, with an intact spine, are there tracheal intubation conditions in which potentially injurious cervical cord strains can occur? Methods This study utilized a computational model of the cervical spine and cord to predict intervertebral motions (rotation, translation) and cord strains (stretch, compression). Routine (Macintosh) intubation force conditions were defined by a specific application location (mid-C3 vertebral body), magnitude (48.8 N), and direction (70 degrees). A total of 48 intubation conditions were modeled: all combinations of 4 force locations (cephalad and caudad of routine), 4 magnitudes (50 to 200% of routine), and 3 directions (50, 70, and 90 degrees). Modeled maximum intervertebral motions were compared to motions reported in previous clinical studies of the range of voluntary cervical motion. Modeled peak cord strains were compared to potential strain injury thresholds. Results Modeled maximum intervertebral motions occurred with maximum force magnitude (97.6 N) and did not differ from physiologically normal maximum motion values. Peak tensile cord strains (stretch) did not exceed the potential injury threshold (0.14) in any of the 48 force conditions. Peak compressive strains exceeded the potential injury threshold (–0.20) in 3 of 48 conditions, all with maximum force magnitude applied in a nonroutine location. Conclusions With an intact cervical spine, even with application of twice the routine value of force magnitude, intervertebral motions during intubation did not exceed physiologically normal maximum values. However, under nonroutine high-force conditions, compressive strains exceeded potentially injurious values. In patients whose cords have less than normal tolerance to acute strain, compressive strains occurring with routine intubation forces may reach potentially injurious values. Editor’s Perspective What We Already Know about This Topic What This Article Tells Us That Is New


2018 ◽  
Vol 4 (1) ◽  
pp. e000362 ◽  
Author(s):  
Ron Jadischke ◽  
David C Viano ◽  
Joe McCarthy ◽  
Albert I King

ObjectivesMost biomechanical research on brain injury focuses on direct blows to the head. There are a few older studies that indicate craniocervical stretch could be a factor in concussion by causing strain in the upper spinal cord and brainstem. The objectives of this study are to assess the biomechanical response and estimate the strain in the upper cervical spine and brainstem from primary impact to the chest in American football.MethodsImpact testing was conducted to the chest of a stationary unhelmeted and helmeted anthropomorphic test device (ATD) as well as the laboratory reconstruction of two NFL game collisions resulting in concussion. A finite element (FE) study was also conducted to estimate the elongation of the cervical spine under tensile and flexion loading conditions.ResultsThe helmeted ATD had a 40% (t=9.84, p<0.001) increase in neck tensile force and an 8% (t=7.267, p<0.001) increase in neck flexion angle when compared with an unhelmeted ATD. The case studies indicated that the neck tension in the injured players exceeded tolerable levels from volunteer studies. The neck tension was combined with flexion of the head relative to the torso. The FE analysis, combined with a spinal cord coupling ratio, estimated that the strain along the axis of the upper cervical spinal cord and brainstem was 10%–20% for the combined flexion and tension loading in the two cases presented.ConclusionStrain in the upper spinal cord and brainstem from neck tension is a factor in concussion.


Sign in / Sign up

Export Citation Format

Share Document