A 100 Motor Study: Investigating Pre-EPA Motors as a Subset of the Industrial Motor Population for Its Effects on the Economic of Motor Replacement, Preliminary Results

2005 ◽  
Author(s):  
Nicole M. Kaufman ◽  
Daniel Welch ◽  
Richard R. Johnson
Keyword(s):  
Energy Savings ◽  
High Efficiency ◽  
Induction Motors ◽  
Preliminary Investigation ◽  
Economic Benefits ◽  
Analysis Software ◽  
Preliminary Results ◽  
Hard Data ◽  
Motor Efficiency ◽  
The Difference

In the absence of hard data, the engineering world tends to be overly conservative in estimating benefits of change. The hypothesis herein discussed is that with hard data, the economics of motor repair/replace decisions could change significantly. If true, this could appreciably boost the efficiency of the industrial motor population by affecting the penetration of high-efficiency motors, such as NEMA Premiums. The energy savings from motor replacement depend on the difference between the efficiency of the new motor and the old motor. There has been a great deal of work investigating new motor efficiency and very little work investigating the actual running efficiency of older motors in the field. Motors that have operated for years experiencing failures and repairs may operate below their original nameplate or assumed efficiency. This study is a preliminary investigation of the efficiency of motors in industrial settings with the purpose of updating currently available motor analysis software tools to more accurately reflect the economic benefits of utilizing high-efficiency industrial induction motors.

39 Managing Burn Wounds with Silvadene

2021 ◽  
Vol 42 (Supplement_1) ◽  
pp. S29-S30
Author(s):  
Tomer Lagziel ◽  
Louis J Born ◽  
Luis H Quiroga ◽  
Eliana Duraes ◽  
Pragna N Shetty ◽  
...  
Keyword(s):  
Length Of Stay ◽  
Wound Infection ◽  
Standard Of Care ◽  
Infection Rates ◽  
Average Amount ◽  
Once Daily ◽  
Preliminary Results ◽  
The Difference ◽  
Dressing Change ◽  
Hospital Acquired

Abstract Introduction Topical delivery of antibacterial agents is typically incorporated and is an essential component of burn wound therapy. The goal is to prevent infection and promote the healing process. Poorly treated wounds can result in scarring or severely in sepsis and multi-organ dysfunction. Topical SSD cream has been the gold-standard for initial local care in partial thickness or full thickness burns. Due to immediate burst release of the drug into the exposed areas, application is relatively frequent (usually twice daily). However, it remains unknown whether twice-daily SSD dressings are superior to once-daily. Methods We maintained a twice-daily dressing change standard of care until 01/01/2019. Patients admitted after that date had their dressing changed once-daily. Our goal is to review outcomes for 75 patients before the change-of-practice and 75 patients after. The main outcomes recorded are wound infection rates, hospital-acquire complications (non-wound related), pain scores, daily narcotic requirements, average amount of SSD used, and length-of-stay. Results Preliminary results of the 75 pre-change-of-practice and 75 post-change-of-practice patients showed slightly better outcomes in the post-change group. Wound-infection rates were the same for both groups (pre=5.33%, post=5.33%), average daily pain-levels for the pre-change group were slightly higher but the difference was negligible and not statistically significant (pre=5.76, post=5.69). The pre-change group had a higher average daily narcotic dosage (pre=6.81mg, post=6.38mg), hospital-acquired complication rates were higher pre-change (pre=10.67%, post=6.67%), and length-of-stay was longer in the pre-change group (pre=10.81, post=9.25). The average amount of SSD jars used per patient was higher as well (pre=6.30, post=2.85). Statistical analysis of the distribution of burn type, age, and burn depth showed no discrepancy and a generalized decreased length-of-stay with once-daily SSD dressing change. Conclusions Preliminary results show that once-daily dressing changes of SSD in burn wounds have no negative impact on wound outcomes. However, it is associated with a decreased length-of-stay, decreased pain levels, and less hospital-acquired complications. A decreased length-of-stay means reduced medical expenses for the patient and the hospital. In addition, less hospital-acquired complications result in better patient recovery. Since the difference in wound outcomes is negligible and statistically insignificant, changing the standard-of-care to once-daily could prove beneficial.

scholarly journals An Integrated Credit-Based Incentive Protocol for Symbol-Level Network-Coded Cooperative Content Distribution among Vehicular Nodes

2018 ◽  
Vol 8 (11) ◽  
pp. 2035 ◽  
Author(s):  
Ing-Chau Chang ◽  
Chin-En Yen ◽  
Jacky Lo
Keyword(s):  
Ad Hoc ◽  
High Efficiency ◽  
Performance Metrics ◽  
Content Distribution ◽  
Long Latency ◽  
Distribution Process ◽  
Distribution Operations ◽  
The Difference ◽  
Different Content ◽  
Content Information

In traditional symbol-level network coding (SLNC)-based cooperative content distribution approaches, they ignore nodes in the vehicular ad hoc network (VANET) having various network-coded content pieces and distinct levels of interests and selfishness for different kinds of content data, which further prevents these vehicular nodes from forwarding their content information to other nodes. With these approaches, these nodes suffer from the low ratio and the long latency to receive all content information. In this paper, based on distinct levels of node interests and selfishness on different content information, we first categorize vehicular nodes into four classes, that is, the destination, intermediate, irrelevant and overhearing ones and then designate their associated credit-based incentive approaches. Second, we modify the flow of traditional SLNC-based cooperative content distribution operations and propose the content bitmap to realize the difference of network-coded content pieces among vehicular nodes. Further, we rigidly combine the proposed credit-based incentive approach with the modified SLNC-based cooperative content distribution operations in SocialCode to encourage all classes of vehicular nodes to rise their incentives for sharing content data in the cooperative content distribution process. Finally, we perform NS-2 simulations on a street map of downtown Taipei, Taiwan to exhibit the high efficiency of SocialCode over related credit-based incentive approaches by analyzing the following performance metrics, that is, average decoding percentage, file downloading delay and credits, with respect to different file sizes and total numbers of vehicular nodes. As the best knowledge we have, SocialCode is one of the first few researches that works on the integration between the credit-based incentive protocol and the SLNC-based cooperative content distribution.

scholarly journals Evaluation of a High-Performance Solar Home in Loveland, Colorado

2006 ◽  
Vol 129 (2) ◽  
pp. 226-234
Author(s):  
Robert Hendron ◽  
Mark Eastment ◽  
Ed Hancock ◽  
Greg Barker ◽  
Paul Reeves
Keyword(s):  
High Performance ◽  
Energy Savings ◽  
High Efficiency ◽  
Building Envelope ◽  
Operating Conditions ◽  
Hot Water ◽  
Space Heating ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water

Building America (BA) partner McStain Neighborhoods built the Discovery House in Loveland, CO, with an extensive package of energy-efficient features, including a high-performance envelope, efficient mechanical systems, a solar water heater integrated with the space-heating system, a heat-recovery ventilator (HRV), and ENERGY STAR appliances. The National Renewable Energy Laboratory (NREL) and Building Science Consortium conducted short-term field-testing and building energy simulations to evaluate the performance of the house. These evaluations are utilized by BA to improve future prototype designs and to identify critical research needs. The Discovery House building envelope and ducts were very tight under normal operating conditions. The HRV provided fresh air at a rate of about 35L∕s(75cfm), consistent with the recommendations of ASHRAE Standard 62.2. The solar hot water system is expected to meet the bulk of the domestic hot water (DHW) load (>83%), but only about 12% of the space-heating load. DOE-2.2 simulations predict whole-house source energy savings of 54% compared to the BA Benchmark (Hendron, R., 2005 NREL Report No. 37529, NREL, Golden, CO). The largest contributors to energy savings beyond McStain’s standard practice are the solar water heater, HRV, improved air distribution, high-efficiency boiler, and compact fluorescent lighting package.

Evaluation of energy savings by using high efficiency motors in a thermal power station

2017 ◽  
Vol 14 (10) ◽  
pp. 839-844 ◽  
Author(s):  
Mohamed Kaddari ◽  
Mahmoud El Mouden ◽  
Abdelowahed Hajjaji
Keyword(s):  
Thermal Power Station ◽  
Energy Savings ◽  
High Efficiency ◽  
Thermal Power ◽  
Power Station

scholarly journals Measurement of Ozone Production Sensor

2010 ◽  
Vol 3 (3) ◽  
pp. 545-555 ◽  
Author(s):  
M. Cazorla ◽  
W. H. Brune
Keyword(s):  
Production Rate ◽  
High Efficiency ◽  
Ambient Air ◽  
Ozone Production ◽  
State University ◽  
Photostationary State ◽  
Sample Chamber ◽  
Efficiency Conversion ◽  
The Difference ◽  
Teflon Film

Abstract. A new ambient air monitor, the Measurement of Ozone Production Sensor (MOPS), measures directly the rate of ozone production in the atmosphere. The sensor consists of two 11.3 L environmental chambers made of UV-transmitting Teflon film, a unit to convert NO2 to O3, and a modified ozone monitor. In the sample chamber, flowing ambient air is exposed to the sunlight so that ozone is produced just as it is in the atmosphere. In the second chamber, called the reference chamber, a UV-blocking film over the Teflon film prevents ozone formation but allows other processes to occur as they do in the sample chamber. The air flows that exit the two chambers are sampled by an ozone monitor operating in differential mode so that the difference between the two ozone signals, divided by the exposure time in the chambers, gives the ozone production rate. High-efficiency conversion of NO2 to O3 prior to detection in the ozone monitor accounts for differences in the NOx photostationary state that can occur in the two chambers. The MOPS measures the ozone production rate, but with the addition of NO to the sampled air flow, the MOPS can be used to study the sensitivity of ozone production to NO. Preliminary studies with the MOPS on the campus of the Pennsylvania State University show the potential of this new technique.

scholarly journals In-situ Desaturation Tests by Electrolysis for Liquefaction Mitigation

2021 ◽  
Author(s):  
Runze Chen ◽  
Yumin Chen ◽  
Hanlong Liu ◽  
Kunxian Zhang ◽  
Ying Zhou ◽  
...  
Keyword(s):  
Minimum Degree ◽  
Electricity Consumption ◽  
Potential Method ◽  
Economic Benefits ◽  
Degree Of Saturation ◽  
Test Results ◽  
Liquefaction Resistance ◽  
The Difference ◽  
Maximum And Minimum Degree

Electrolytic desaturation is a potential method for improving the liquefaction resistance of the liquefiable foundation by reducing the soil saturation. In this study, in-situ desaturation tests were performed to investigate the resistivity of soil at different depth and the water level of the foundation under different current. The test results show that at constant currents of 1 A (Ampere, unit of the direct current), 2 A and 3 A, the saturation of the treated foundation reached 87%, 83% and 80%. During the electrolysis process, the generated gas migrates vertically and horizontally under the influence of buoyancy and gas pressure. In the end of electrolysis, the gas inside the sand foundation basically migrates vertically only. The higher current intensity employed for electrolysis will affect the uniformity and stability of the gas. At constant currents of 1 A, 2 A and 3 A, the difference between the maximum and minimum degree of saturation in the treated foundation was 14%, 18% and 19%; and after electrolysis halted for 144 h, the saturation in the treated foundation was 90%, 85% and 87%. The electricity consumption analysis indicates that the desaturation method has excellent economic benefits in the treatment of saturated sand foundations.

Sign in / Sign up

Export Citation Format

Share Document