Evaluation of Turbulence Closure Schemes for Stratified Two Phase Flow

2003 ◽  
Author(s):  
R. Banerjee ◽  
K. M. Isaac
Keyword(s):  
Experimental Data ◽  
Channel Flow ◽  
Three Dimensional ◽  
Turbulence Closure ◽  
Multiphase Model ◽  
Phase Flow ◽  
Two Dimensional ◽  
Straight Channel ◽  
Two Phase ◽  
Meandering Channel

Three turbulence closure schemes: standard k-ε, RNG k-ε and RSM models have been studied and evaluated for stratified two-phase flows. The flow was modeled using the VOF multiphase model. Four case studies were used to evaluate the turbulence schemes. The first three consisted of a straight channel and have been modeled as two-dimensional problems. The fourth is a three-dimensional meandering channel flow. The results have been compared with available experimental data. All the cases were studied using the commercial CFD package FLUENT.

Rapid two-dimensional imaging of bubbles and slugs in a three-dimensional, gas-solid, two-phase flow system using ultrafast magnetic resonance

2007 ◽  
Vol 75 (2) ◽  
Author(s):  
C. R. Müller ◽  
D. J. Holland ◽  
J. F. Davidson ◽  
J. S. Dennis ◽  
L. F. Gladden ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Two Phase Flow ◽  
Flow System ◽  
Three Dimensional ◽  
Phase Flow ◽  
Two Dimensional ◽  
Two Phase

Numerical Analysis of Two-Phase Flow in Gas-Stirred Reactors

1990 ◽  
Vol 204 (5) ◽  
pp. 311-319
Author(s):  
Y M Ferng ◽  
C C Chieng ◽  
C Pan
Keyword(s):  
Experimental Data ◽  
Liquid Metal ◽  
Two Phase Flow ◽  
Gas Injection ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Water Model ◽  
Phase Flow ◽  
Two Phase ◽  
Stirred Reactors

Using the multi-dimensional, turbulent, two-phase flow model, the fluid flow phenomena for gas injecting through a submerged lance in gas-stirred reactors are investigated numerically by a finite difference algorithm. The present numerical model is validated by comparison with the experimental data of the water model and extended to predict the flow fields and mixing phenomena inside the liquid metal model. This study indicates that the flow characteristics and mixing behaviour of the water model are similar to the metal model and the experimental data of the water model can be an important reference for the design of liquid metal reactors. The investigations consist of central (two-dimensional) and off-centred gas injection (three-dimensional) with full—and fractional—depth of lance submergence and with different gas injection rates.

Development and Validation of a Three-Dimensional Multiphase Flow CFD Analysis for Journal Bearings in Steam and Heavy Duty Gas Turbines

2012 ◽  
Author(s):  
Stephan Uhkoetter ◽  
Stefan aus der Wiesche ◽  
Michael Kursch ◽  
Christian Beck
Keyword(s):  
Experimental Data ◽  
Multiphase Flow ◽  
Gas Turbines ◽  
High Speed ◽  
Three Dimensional ◽  
Air Entrainment ◽  
Journal Bearings ◽  
Heavy Duty ◽  
Present Contribution ◽  
Two Phase

The traditional method for hydrodynamic journal bearing analysis usually applies the lubrication theory based on the Reynolds equation and suitable empirical modifications to cover turbulence, heat transfer, and cavitation. In cases of complex bearing geometries for steam and heavy-duty gas turbines this approach has its obvious restrictions in regard to detail flow recirculation, mixing, mass balance, and filling level phenomena. These limitations could be circumvented by applying a computational fluid dynamics (CFD) approach resting closer to the fundamental physical laws. The present contribution reports about the state of the art of such a fully three-dimensional multiphase-flow CFD approach including cavitation and air entrainment for high-speed turbo-machinery journal bearings. It has been developed and validated using experimental data. Due to the high ambient shear rates in bearings, the multiphase-flow model for journal bearings requires substantial modifications in comparison to common two-phase flow simulations. Based on experimental data, it is found, that particular cavitation phenomena are essential for the understanding of steam and heavy-duty type gas turbine journal bearings.

Numerical Analysis of Two-Phase Pipe Flow of Liquid Helium Using Multi-Fluid Model

2001 ◽  
Vol 123 (4) ◽  
pp. 811-818 ◽  
Author(s):  
Jun Ishimoto ◽  
Mamoru Oike ◽  
Kenjiro Kamijo
Keyword(s):  
Phase Transition ◽  
Gas Phase ◽  
Liquid Helium ◽  
Two Phase Flow ◽  
Fluid Model ◽  
Numerical Results ◽  
Phase Flow ◽  
Two Dimensional ◽  
Two Phase ◽  
Normal Fluid

The two-dimensional characteristics of the vapor-liquid two-phase flow of liquid helium in a pipe are numerically investigated to realize the further development and high performance of new cryogenic engineering applications. First, the governing equations of the two-phase flow of liquid helium based on the unsteady thermal nonequilibrium multi-fluid model are presented and several flow characteristics are numerically calculated, taking into account the effect of superfluidity. Based on the numerical results, the two-dimensional structure of the two-phase flow of liquid helium is shown in detail, and it is also found that the phase transition of the normal fluid to the superfluid and the generation of superfluid counterflow against normal fluid flow are conspicuous in the large gas phase volume fraction region where the liquid to gas phase change actively occurs. Furthermore, it is clarified that the mechanism of the He I to He II phase transition caused by the temperature decrease is due to the deprivation of latent heat for vaporization from the liquid phase. According to these theoretical results, the fundamental characteristics of the cryogenic two-phase flow are predicted. The numerical results obtained should contribute to the realization of advanced cryogenic industrial applications.

scholarly journals Experimental data for the slug two-phase flow characteristics in horizontal pipeline

Data in Brief ◽  
2018 ◽  
Vol 16 ◽  
pp. 527-530 ◽  
Author(s):  
Abdalellah O. Mohmmed ◽  
Mohammad S. Nasif ◽  
Hussain H. Al-Kayiem
Keyword(s):  
Experimental Data ◽  
Two Phase Flow ◽  
Flow Characteristics ◽  
Phase Flow ◽  
Two Phase

scholarly journals Investigation of representing hysteresis in macroscopic models of two-phase flow in porous media using intermediate scale experimental data

2017 ◽  
Vol 53 (1) ◽  
pp. 199-221 ◽  
Author(s):  
Abdullah Cihan ◽  
Jens Birkholzer ◽  
Luca Trevisan ◽  
Ana Gonzalez-Nicolas ◽  
Tissa Illangasekare
Keyword(s):  
Experimental Data ◽  
Porous Media ◽  
Two Phase Flow ◽  
Flow In Porous Media ◽  
Phase Flow ◽  
Two Phase ◽  
Intermediate Scale ◽  
Macroscopic Models

Experiment and Numerical Simulation of Bubble Behaviors in Argon Gas Injection Into Lead-Bismuth Pool

2006 ◽  
Author(s):  
Yumi Yamada ◽  
Toyou Akashi ◽  
Minoru Takahashi
Keyword(s):  
Direct Contact ◽  
Two Phase Flow ◽  
Experimental Result ◽  
Feed Water ◽  
Force Model ◽  
Phase Flow ◽  
Two Dimensional ◽  
Two Phase ◽  
Argon Gas ◽  
Bubble Rising

In a lead-bismuth alloy (45%Pb-55%Bi) cooled direct contact boiling water fast reactor (PBWFR), steam can be produced by direct contact of feed water with primary Pb-Bi coolant in the upper core plenum, and Pb-Bi coolant can be circulated by buoyancy forces of steam bubbles. As a basic study to investigate the two-phase flow characteristics in the chimneys of PBWFR, a two-dimensional two-phase flow was simulated by injecting argon gas into Pb-Bi pool in a rectangular vessel (400mm in length, 1500mm in height, 50mm in width), and bubble behaviors were investigated experimentally. Bubble sizes, bubble rising velocities and void fractions were measured using void probes. Argon gas was injected through five nozzles of 4mm in diameter into Pb-Bi at two locations. The experimental conditions are the pressure of atmospheric pressure, Pb-Bi temperatures of 443K, and the flow rate of injection Ar gas is 10, 20, and 30 NL/min. The measured bubble rising velocities were distributed in the range from 1 to 3 m/s. The average velocity was about 0.6 m/s. The measured bubble chord lengths were distributed from 1mm up to 30mm. The average chord length was about 7mm. An analysis was performed by two-dimensional and two-fluid model. The experimental results were compared with the analytical results to evaluate the validity of the analytical model. Although large diameter bubbles were observed in the experiment, the drag force model for spherical bubbles performed better for simulation of the experimental result because of high surface tension force of Pb-Bi.

Compressor Performance 2D Modelling at Reverse Flow Conditions

2010 ◽  
Author(s):  
L. Gallar ◽  
I. Tzagarakis ◽  
V. Pachidis ◽  
R. Singh
Keyword(s):  
Experimental Data ◽  
Reverse Flow ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Engine Performance ◽  
Two Dimensional ◽  
Flow Conditions ◽  
Compressor Surge ◽  
Compressor Performance ◽  
Shaft Failure

After a shaft failure the compression system of a gas turbine is likely to surge due to the heavy vibrations induced on the engine after the breakage. Unlike at any other conditions of operation, compressor surge during a shaft over-speed event is regarded as desirable as it limits the air flow across the engine and hence the power available to accelerate the free turbine. It is for this reason that the proper prediction of the engine performance during a shaft over-speed event claims for an accurate modelling of the compressor operation at reverse flow conditions. The present study investigates the ability of the existent two dimensional algorithms to simulate the compressor performance in backflow conditions. Results for a three stage axial compressor at reverse flow were produced and compared against stage by stage experimental data published by Gamache. The research shows that due to the strong radial fluxes present over the blades, two dimensional approaches are inadequate to provide satisfactory results. Three dimensional effects and inaccuracies are accounted for by the introduction of a correction parameter that is a measure of the pressure loss across the blades. Such parameter is tailored for rotors and stators and enables the satisfactory agreement between calculations and experiments in a stage by stage basis. The paper concludes with the comparison of the numerical results with the experimental data supplied by Day on a four stage axial compressor.

A Combined Eulerian and Lagrangian Method for Prediction of Evaporating Sprays

2002 ◽  
Vol 124 (3) ◽  
pp. 481-488 ◽  
Author(s):  
M. Burger ◽  
G. Klose ◽  
G. Rottenkolber ◽  
R. Schmehl ◽  
D. Giebert ◽  
...  
Keyword(s):  
Two Phase Flow ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Lagrangian Method ◽  
Phase Flow ◽  
Two Phase Flows ◽  
Two Phase ◽  
Lagrangian Methods ◽  
Eulerian Method ◽  
Lagrangian Modeling

Polydisperse sprays in complex three-dimensional flow systems are important in many technical applications. Numerical descriptions of sprays are used to achieve a fast and accurate prediction of complex two-phase flows. The Eulerian and Lagrangian methods are two essentially different approaches for the modeling of disperse two-phase flows. Both methods have been implemented into the same computational fluid dynamics package which is based on a three-dimensional body-fitted finite volume method. Considering sprays represented by a small number of droplet starting conditions, the Eulerian method is clearly superior in terms of computational efficiency. However, with respect to complex polydisperse sprays, the Lagrangian technique gives a higher accuracy. In addition, Lagrangian modeling of secondary effects such as spray-wall interaction enhances the physical description of the two-phase flow. Therefore, in the present approach the Eulerian and the Lagrangian methods have been combined in a hybrid method. The Eulerian method is used to determine a preliminary solution of the two-phase flow field. Subsequently, the Lagrangian method is employed to improve the accuracy of the first solution using detailed sets of initial conditions. Consequently, this combined approach improves the overall convergence behavior of the simulation. In the final section, the advantages of each method are discussed when predicting an evaporating spray in an intake manifold of an internal combustion engine.

Sign in / Sign up

Export Citation Format

Share Document