Fabrication of a Micro-Opto-Mechanical Accelerometer Based on Intensity Modulation

Author(s):  
Seung-Jae Lee ◽  
Dong-Woo Cho

Accelerometers are most frequently used to monitor machining states, and are therefore crucial for automated and unmanned plant operations. In such a harsh environment, micro-accelerometers based on optical methods can be effective. This paper presents a new type of micro-opto-mechanical accelerometer that was developed using a combination of new technologies, such as deep reactive ion etching (DRIE), micro-stereolithography, and intensity modulation. The advantages of intensity modulation include the simplicity of the detection principle and the lack of a requirement for a high-quality light source. This paper reports the design of two types of micro-accelerometer using the finite element method. Experiments showed that the fabricated micro-accelerometers had resonant frequencies of approximately 2 and 10 kHz, with suitable linear ranges and sensitivities. The developed micro-opto-mechanical accelerometers can thus be used for various practical purposes, including machining state monitoring in automated and unmanned plant operations.

2021 ◽  
Vol 2 (1) ◽  
pp. 46-62
Author(s):  
Santiago Iglesias-Baniela ◽  
Juan Vinagre-Ríos ◽  
José M. Pérez-Canosa

It is a well-known fact that the 1989 Exxon Valdez disaster caused the escort towing of laden tankers in many coastal areas of the world to become compulsory. In order to implement a new type of escort towing, specially designed to be employed in very adverse weather conditions, considerable changes in the hull form of escort tugs had to be made to improve their stability and performance. Since traditional winch and ropes technologies were only effective in calm waters, tugs had to be fitted with new devices. These improvements allowed the remodeled tugs to counterbalance the strong forces generated by the maneuvers in open waters. The aim of this paper is to perform a comprehensive literature review of the new high-performance automatic dynamic winches. Furthermore, a thorough analysis of the best available technologies regarding towline, essential to properly exploit the new winches, will be carried out. Through this review, the way in which the escort towing industry has faced this technological challenge is shown.


2011 ◽  
Vol 71-78 ◽  
pp. 4634-4637
Author(s):  
Tian Lin Cui ◽  
Jing Kun Pi ◽  
Yong Hui Liu ◽  
Zhen Hua He

In order to optimize the design of flexible pressurized anchor, this paper gives a further analysis on structural features of the new type of flexible pressurized anchor and carries out a contact analysis on anchor system by using the finite element method. It calculates as well as researches the contact stress relation of interactional anchor rod and surrounding rock under the circumstance of anchoring, obtaining the law of all major design parameters of anchor rod structure and pressure from surrounding rock influencing the anchoring performance and arriving at the conclusion that the anchor rod is adapted to various conditions of surrounding rock. They not only serve as important references for optimized design and application of anchor rod, but also provide a basis for the experiment of new type of anchor rod.


2010 ◽  
Vol 97-101 ◽  
pp. 64-68
Author(s):  
Jian Chen ◽  
Jin Wang ◽  
Guo Dong Lu ◽  
Zheng Qi Ling

High- precision and large scale are the developing trend for injection molding machine clamping system .This paper compared the characteristics of three-platen toggle and dual-platen hydraulic clamping system. The key impact factors that effecting plastic parts` precision from clamping system were discussed systematically first time. Based on these analyses, a new clamping system has been proposed and manufactured to improve the plastics parts` precision, including three new technologies: new type dual-platen structure, parallelism adaptive correction technology and numerical controlled hydraulic servo system technology. It has been applied in practical machine successfully, and experiment result proves that it is effective enough to satisfying the high-precision molding of large plastics parts.


Author(s):  
Lynda Avendaño Santana

Lateral learning in the last two decades can be seen in peer-to-peer learning that is being promoted by new technologies where there are apps that allow students to work together in real time through virtual space, a method which thereby shifts the focus from the solitary self to the interdependent group which lives an educational experience of a collaborative and distributed nature, whose focus lies in instilling the principle of the social nature of knowledge. The ideological bases of lateral thinking are sustained by issues such as emancipation of the student from the authority of the teacher, the relationship of collaboration, permitting the development of individual appreciations and ideas, based simultaneously on those of their peers, on the democratization of knowledge, and so on, which ultimately refers to a collaborative creative education, to a democratic education, and to an education for democracy that assumes the new technologized context in which we live. Because of this, lateral thinking is increasingly influencing everyday life and areas such as education and the arts, as it happens in the post-Internet art, and more specifically net.art (i.e., an online art), which is a collaborative creative experience that has become an instrument which allows us to see a “new type of art in the 21st century.” Net.art, Internet art and the most experimental design, therefore constitutes a community experience that hypertextualizes computerized languages and generates poetic perspectives as artistic practices of lateral thinking. It has bestowed upon us a series of mechanisms to devise collaborative development strategies for lateral learning based on those creative ludic educational experiences of using and interacting with new technologies. This is essential to bear in mind because, as Jeremy Rifkin says, collaborative learning helps students to expand their own self-awareness, including their “self” in reference to diverse “others,” and promotes in-depth participation in more interdependent communities. It extends the territory comprised within the boundaries of empathy.


2015 ◽  
Vol 645-646 ◽  
pp. 841-846 ◽  
Author(s):  
Jian Yan Wang ◽  
Ting Ting Wang ◽  
Hang Guo

Accelerometer in MEMS always is made by capacitive or piezoresistive, whose dynamic response is not good, the operating frequency is narrow, and the cross-axis sensitivity is low. A new type of piezoelectric micro-accelerometer is designed, and its structure is “x” type. The sensing unit is piezoelectric PZT films, which is achieved by sol-gel method. The accelerometer is a triaxial accelerometer. The theoretical and simulation analysis is used to achieve the charge sensitivity and response frequency, and also get the optimal structural parameters. A new circuit connection is proposed to improve the sensitivity and avoid the cross-axis sensitivity. The design achieves the z-axis sensitivity with more than 40 pC/g, x, y-axis sensitivity with more than 8pC/g, and the response frequency is about 3000Hz.


2020 ◽  
Vol 10 (4) ◽  
pp. 320-329
Author(s):  
V. A. Zubakin

Transition to digital technologies in management of power industry at all levels – an inevitable consequence of the technical progress which has generated opportunities for diversification, decarbonization and decentralization. Thus it is necessary to recognize that digitalization in power industry is NOT automation, and first of all creation of new business models, services and the markets with a support on possibility of digital economy. In this article questions of transformation of architecture of power industry, and also the main restrictions are considered: absence in regulatory base of new opportunities for consumers; general system inefficiency; impossibility “to legalize” appearance of new subjects (active consumers and prosumers, operators of micropower supply systems and aggregators of the distributed power objects, various service organizations), and also to deregulate the relations between them, to standardize interaction interfaces with EEC, to transform the energy markets.In article it is offered for transition to new digital power to make corresponding changes to the legislation: to enter new type of participants of the market (the active consumer, an active power complex), operated intellectual connection carrying out the standard with the electrical power system, completely responsible for management of the power supply and thus having the minimum regulatory restrictions on organizational model of the work; to improve rules of functioning of trade systems for creation of the markets of the distributed power providing an effective exchange of goods and services between traditional participants of the markets and participants of new type; to enter possibility of application of technologies of the coordinated management of the distributed sources and consumers of energy, systems of storage of energy, means of regulation of loading (“aggregators”) for the purpose of increase of efficiency of their use and participation in the electric power and power markets, including rendering system services and performance of other functions in these markets (the pilot project of such system is realized under the leadership of the author of the present article by subsidiary PAO “Lukoil” “Energy and gas of Romania”); to increase technological and economic flexibility of conditions on reliability and quality of power supply, creation of possibility of a choice by the consumer of conditions of power supply necessary for him and the account them in cost; to enter the accounting of the opportunities given by “new” decisions, at an assessment, formation and implementation of investment programs of the adjustable companies (including introduction of a technique of an assessment of investment projects at possession cost on all life cycle of the decision); to replace cross subsidizing of the population by industrial consumers with mechanisms of address social support and / or with system of restriction of volumes of consumption on reduced rates (“соцнорма”); to refuse further deployment of system of subsidizing of power supply of one regions at the expense of consumers of other regions (as it leads to growth of inefficient power consumption in the subsidized regions, not provided with available generation and infrastructure); to change norms of technical regulation, norms of design on the basis of new technologies; to make changes to programs of development of the infrastructure organizations of power industry taking into account trends of diversification, decentralization, decarbonization and a digitalization; to provide possibility of stimulation, including tariff, implementation of regional programs (pilot and regular), aimed at the complex development of power industry on the basis of new approaches, technologies and the practician, and also the hi-tech companies of small and medium business providing development.


Metals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1664
Author(s):  
Do Hoon Cho ◽  
Seong Min Seo ◽  
Jang Baeg Kim ◽  
Sri Harini Rajendran ◽  
Jae Pil Jung

With the continuous miniaturization of electronic devices and the upcoming new technologies such as Artificial Intelligence (AI), Internet of Things (IoT), fifth-generation cellular networks (5G), etc., the electronics industry is achieving high-speed, high-performance, and high-density electronic packaging. Three-dimensional (3D) Si-chip stacking using through-Si-via (TSV) and solder bumping processes are the key interconnection technologies that satisfy the former requirements and receive the most attention from the electronic industries. This review mainly includes two directions to get a precise understanding, such as the TSV filling and solder bumping, and explores their reliability aspects. TSV filling addresses the DRIE (deep reactive ion etching) process, including the coating of functional layers on the TSV wall such as an insulating layer, adhesion layer, and seed layer, and TSV filling with molten solder. Solder bumping processes such as electroplating, solder ball bumping, paste printing, and solder injection on a Cu pillar are discussed. In the reliability part for TSV and solder bumping, the fabrication defects, internal stresses, intermetallic compounds, and shear strength are reviewed. These studies aimed to achieve a robust 3D integration technology effectively for future high-density electronics packaging.


Author(s):  
K. Yudin ◽  
A. Pogosbekov

Periodical mixers are considered. The expediency of developing a new type of mixer is presented. Features of the material movement in the mixer allow to speak about the presence of elements of a gyroscopic effect. The mixing chamber is rotated by means of belt, chain and conical transmission. The resulting complex spatial movement of material particles can be controlled by a frequency Converter and the selection of appropriate gears or using a belt drive. An algorithm for modeling the drive unit of a mixer with a bidirectional rotational effect on the material is presented. The features of the drive unit and its components are considered. The task is to build a model of deformation of the drive unit of the mixer. The finite element method (FEM) for the drive unit of the mixer is used. Machine experiments are performed that implement fatigue calculations of the drive unit with a study in the SolidWorks Simulation environment. The results of static analysis of the drive unit operation in determining the deformation, static analysis of the drive unit operation in determining the voltage with varying torque are obtained. A variant of static analysis is presented when using a belt drive instead of a gear drive. The practical implementation of the mixer drive unit in metal is shown. Conclusions on modeling are made.


Sensor Review ◽  
2015 ◽  
Vol 35 (3) ◽  
pp. 237-243 ◽  
Author(s):  
Robert Bogue

Purpose – The purpose of this paper is to provide details of recent developments in sensors for detecting explosives and chemical warfare agents. Design/methodology/approach – Following an introduction, this paper first discusses a selection of new sensing techniques aimed at detecting explosives and explosive devices. It then considers new developments in sensors for detecting chemical warfare agents. Brief concluding comments are drawn. Findings – This paper shows that a diversity of sensor technologies is being investigated, including various advanced optical methods, nanomaterials, microelectromechanical system, electronic noses, biosensors and electrochemical techniques, several of which offer levels of sensitivity in the parts-per-trillion region. These not only have the potential to yield improved devices for detecting explosives and chemical weapons but may also play a role in health care, environmental monitoring, drug detection and industrial health and safety. Originality/value – In an era of escalating terrorism and military conflicts, this provides a timely review of new technologies for detecting explosives and chemical warfare agents.


2012 ◽  
Vol 723 ◽  
pp. 72-76
Author(s):  
Li Zhao ◽  
Pei Quan Guo ◽  
Yan Ke Cao ◽  
Xiao Wei Wang ◽  
Pu Zhang

As a new type of green manufacturing technology, high speed dry cutting technology to implement human sustainable development strategy has important significance. The research reviews the features and advantages of the high speed dry cutting technology, and analyzes the key technologies (including machine tools, cutting tool and coating technology to achieve high-speed dry cutting).


Sign in / Sign up

Export Citation Format

Share Document