Maglev Linear Actuator for Nanopositioning

2002 ◽  
Author(s):  
Won-jong Kim ◽  
Himanshu Maheshwari ◽  
Jie Gu
Keyword(s):  
Degrees Of Freedom ◽  
Vibration Isolation ◽  
Force Feedback ◽  
Linear Actuator ◽  
Test Results ◽  
Loop Control ◽  
Nanoscale Structures ◽  
Six Degrees Of Freedom ◽  
Positioning Device ◽  
Disturbance Analysis

Manufacture of nanoscale structures and atomic-level manipulation is an emerging technology field in the 21st century [1,2]. This paper presents a novel magnetically levitated instrument capable of six-degrees-of-freedom (6-DOF) motion with a single moving part. The applications, where this generic positioning device can be used, are manufacturing of nanoscale structures, assembly and packaging of microparts, vibration isolation for delicate instrumentation and motion/force feedback in telepresence surgery. The key element of this stage is a linear actuator capable of providing forces in both suspension and translation without contact. The total range of motion for the linear actuator is ±250 μm. In this paper, we present the closed-loop control test results and stochastic noise/disturbance analysis and prediction for the linear actuator.

Maglev 6-DOF Stage for Nanopositioning

2003 ◽  
Author(s):  
Wong-Jong Kim ◽  
Shobhit Verma ◽  
Jie Gu
Keyword(s):  
Degrees Of Freedom ◽  
Vibration Isolation ◽  
Mechanical Design ◽  
Wear Particle ◽  
Test Results ◽  
Mechanical Contact ◽  
Position Resolution ◽  
Nanoscale Structures ◽  
Particle Generation ◽  
Six Degrees Of Freedom

This paper presents a novel magnetically levitated (maglev) stage with nanoscale positioning capability in all six degrees of freedom (DOFs). The key aspect of this device is that its single moving part has no mechanical contact with its stationary base, which leads to no mechanical friction and stiction, and no wear particle generation. We present herein the mechanical design, instrumentation, and test results of this maglev stage. Currently it shows position resolution of 4 nm, position noise of 2 nm rms, hundreds-of-micrometer translational travel range, a-few-milliradian rotational travel range, and power consumption less than a fraction of a Watt per axis. This maglev stage can be used in numerous applications such as manufacture of nanoscale structures, assembly and packaging on micro-size parts, vibration isolation for delicate instrumentation, and telepresence microsurgery.

Research on Network Communication Model of Intelligent Ship Handling Simulator

2011 ◽  
Vol 97-98 ◽  
pp. 787-793 ◽  
Author(s):  
Shen Hua Yang ◽  
Guo Quan Chen ◽  
Xing Hua Wang ◽  
Yue Bin Yang
Keyword(s):  
Mathematical Model ◽  
Degrees Of Freedom ◽  
Communication Process ◽  
Network Communication ◽  
Communication Model ◽  
Test Results ◽  
Six Degrees Of Freedom ◽  
Model Based ◽  
Hydraulic Servo ◽  
Ship Handling

Due to the target ship in the traditional ship handling simulator have not the ability to give way to other ships automatically to avoid collision, this paper put forward a new idea that bringing the hydraulic servo platform, six degrees of freedom ship mathematical model, the actual traffic flow, researching achievement of automatic anti-collision in research of the new pattern ship handling simulator, and successfully develop the Intelligent Ship Handling Simulator(ISHS for short). The paper focuse on the research on the network communication model of ISHS. We took the entire simulator system as three relatively independent networks, proposed a framework of communication network that combined IOCP model based on TCP with blocking model based on UDP, and gave the communication process and protocols of system. Test results indicate that this is an effective way to improve the ownship capacity of ship handling simulator and meet the need of multi-ownship configuration of desktop system of ship handling simulator.

First Test Results of a Haptic Tele-Operation System to Enhance Stability of Telescopic Handlers

2010 ◽  
Author(s):  
Stefano Cenci ◽  
Giulio Rosati ◽  
Damiano Zanotto ◽  
Fabio Oscari ◽  
Aldo Rossi
Keyword(s):  
Degrees Of Freedom ◽  
Force Feedback ◽  
Control Strategies ◽  
Input Device ◽  
Test Results ◽  
Operation System ◽  
Work Related ◽  
Control Schemes ◽  
Working Capability ◽  
Stiff Joint

According to a recent report of ILO (International Labour Organization), more than two million people die or loose the working capability every year because of accidents or work-related diseases. A large portion of these accidents are related to the execution of motion and transportation tasks involving heavy duty machines. The insufficient degree of interaction between the human operator and the machine may be regarded as one of the major causes of this phenomenon. The main goal of the tele-operation system presented in this paper is to both preserving slave (machine) stability, by reducing the inputs of slave actuators when certain unsafe working conditions occur, and improving the level of interaction at master (operator) side. Different control schemes are proposed in the paper, including several combinations of master and slave control strategies. The effectiveness of the algorithms is analyzed by presenting some experimental results, based on the use of a two degrees-of-freedom force feedback input device (with one active actuator and one passive stiff joint) coupled with a simulator of a telescopic handler.

Theory and Method of Dynamic Modeling for Multilayer Vibration Isolation System

2000 ◽  
Author(s):  
Liao Dao-Xun ◽  
Lu Yong-Zhong ◽  
Huang Xiao-Cheng
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Vibration Isolation ◽  
Rigid Bodies ◽  
Design Calculation ◽  
Isolation System ◽  
Dry Land ◽  
Vibration Isolation System ◽  
Six Degrees Of Freedom ◽  
Floating Raft

Abstract The multilayer vibration isolation system has been widely applied to isolate vibration in dynamic devices of ships, high-speed vehicles forging hammer and precise instruments. The paper is based on the coordinate transformation of space general motion for mass blocks (rigid bodies) and Lagrangian equation of multilayer vibration isolation system. It gives a strict mathematical derivation on the differential equation of the motion for the system with six degrees of freedom of relative motion between mass blocks (including base). The equations are different from the same kind of equations in the reference literatures. It can be used in the floating raft of ships in order to isolates vibration and decrease noise, also used in design calculation of the multilayer vibration isolation for dynamic machines and precise instruments on the dry land.

scholarly journals Design and performance assessment of an underactuated hand for industrial applications

2011 ◽  
Vol 2 (1) ◽  
pp. 9-15 ◽  
Author(s):  
C. Meijneke ◽  
G. A. Kragten ◽  
M. Wisse
Keyword(s):  
Degrees Of Freedom ◽  
International Workshop ◽  
Input Voltage ◽  
Industrial Applications ◽  
Open Loop ◽  
Robotic Hand ◽  
Loop Control ◽  
Six Degrees Of Freedom ◽  
And Performance ◽  
Underactuated Robot

Abstract. The Delft Hand 2 (DH-2) is an underactuated robot hand meant for industrial applications, having six degrees of freedom (DoF), one actuator (DoA) and no sensors. It was designed to provide a cheap and robust hand to grasp a large range of objects without damaging them. The goal of this paper is to assess the design and performance of the DH-2, demonstrating how the design was optimized for its intended application area and how the hand was simplified to make it commercially attractive. Performance tests show that the DH-2 has a payload of 2 kg for an object range of 60 to 120 mm, it can close or open within 0.5 s, and it only uses open-loop control by means of the input voltage of the motor. The results demonstrate that the industrial need of a simple, cheap and effective robotic hand can be achieved with the principle of underactuation and the use of conventional components. This paper was presented at the IFToMM/ASME International Workshop on Underactuated Grasping (UG2010), 19 August 2010, Montréal, Canada.

Development of Six Degrees of Freedom Vibration Isolation System for Microgravity Environment

1995 ◽  
Author(s):  
Toshiyuki Suzuki ◽  
Koji Tanida ◽  
Akira Tanji ◽  
Koichi Okubo
Keyword(s):  
Degrees Of Freedom ◽  
Vibration Isolation ◽  
Parabolic Flight ◽  
Microgravity Environment ◽  
External Disturbances ◽  
Isolation System ◽  
Vibration Isolation System ◽  
Six Degrees Of Freedom ◽  
Active Vibration ◽  
Good Agreement

Abstract An active vibration isolation system, under development for use in microgravity environment, provides electromagnetic suspension by means of voice coils arranged in pairs to control the translational and rotational movements of the payload, three pairs of which cover the three axes to ensure control of payload movement in all six degrees of freedom. A series of tests performed on this system in microgravity environment created by parabolic flight proved that external disturbances in frequencies above 0.1 Hz were effectively reduced by applying the system. Also, good agreement was obtained between the measured performance and results of numerical simulation.

Development of a Haptic Device with Wire-Driven Parallel Structure

2017 ◽  
Vol 11 (3) ◽  
pp. 385-395
Author(s):  
Carlo Ferraresi ◽  
◽  
Carlo De Benedictis ◽  
Francesco Pescarmona
Keyword(s):  
Degrees Of Freedom ◽  
Force Feedback ◽  
Parallel Structure ◽  
Control Logic ◽  
End Effector ◽  
Six Degrees Of Freedom ◽  
Force Closure ◽  
Force Reflection ◽  
Definition Of ◽  
Selection Of

This study focuses on the specific problems that may arise in the development of a parallel, cable-driven device designed for teleoperations systems utilizing force-reflection feedback. A redundant six degrees-of-freedom structure, actuated by nine wires, is described as a convenient layout for a haptic master for telemanipulation. A methodology for the kinematic and static analysis and the evaluation of the device workspace is described. The condition of force closure is used to find all available poses of the end-effector, thereby defining the workspace, whose characteristics are assessed by opportunely conceived indexes. Typical characteristics of cable and implementations thereof in the device are considered. Regarding the realization of the device, relevant attention is given to the definition of the control logic, which can be complex for parallel devices. The selection of the actuators, crucial in realizing force feedback, is discussed. In particular, pneumatic actuation is considered, verified as the most appropriate method for implementation and force control of the cylinders.

Use of 1DOF Haptic Device for Remote-Controlled 6DOF Assembly

2014 ◽  
Vol 8 (3) ◽  
pp. 452-459 ◽  
Author(s):  
Ryoya Kamata ◽  
◽  
Ryosuke Tamura ◽  
Satoshi Niitsu ◽  
Hiroshi Kawaharada ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Force Feedback ◽  
Haptic Device ◽  
Prototype System ◽  
Assembly Operation ◽  
Six Degrees Of Freedom ◽  
Controlled Assembly ◽  
Sense Of Reality ◽  
Position And Orientation ◽  
Assembly Operations

This paper describes a remote controlled assembly using a haptic device. Most haptic devices have six Degrees Of Freedom (DOFs) for a higher sense of reality. However, for assembly operation, the simultaneous motion of parts with only one or two DOFs is required, and force feedback to operators is used only to maintain contact and detect collisions among parts. This leads to the possibility of assembly operations using a haptic device with a small number of DOFs. In this paper, we propose virtual planes to perform remote control of a 6DOF assembly by way of 1DOF user operations. Virtual planes separate the DOFs for user operation and for automatically generated motions that complement the user operation DOF in each assembly operation. A prototype system was developed with a 6DOF manipulator and camera. The system allows an operator to place virtual planes in any position and orientation using a camera image of the workspace. The experiment results showed the effectiveness of the method for remote controlled assembly without geometry information on the parts.

Sign in / Sign up

Export Citation Format

Share Document