A Control-Oriented Engine Benchmark Model

2000 ◽  
Author(s):  
N. Sivashankar ◽  
D. Boskovic ◽  
J. Friedman
Keyword(s):  
Control System ◽  
System Design ◽  
Control System Design ◽  
Hardware In The Loop ◽  
Core Element ◽  
Benchmark Model ◽  
Engine Model ◽  
Simulation Performance ◽  
The Core ◽  
And Behavior

Abstract A benchmark model is required to evaluate the performance of simulation acceleration technology and Hardware-in-the-Loop system implementations. This paper describes a six-cylinder engine model that serves this purpose. The engine model includes modeling constructs and behavior that are important for control system design and analysis. Individual cylinder torque dynamics is the core element of this model and this is described in detail. Metrics to evaluate simulation performance are also discussed.

Embedded Arm-Based Control System Design for Automatic Strapping Machines

2014 ◽  
Vol 687-691 ◽  
pp. 3153-3157
Author(s):  
Jiang Ping Huang ◽  
Zheng Dong Wang ◽  
Wen Ze Yu ◽  
Kai He ◽  
Ru Xu Du
Keyword(s):  
Control System ◽  
System Design ◽  
Control Method ◽  
General Structure ◽  
Control System Design ◽  
Electronic Components ◽  
Simple Operation ◽  
The Core ◽  
Arm Microprocessor ◽  
Working Performance

A design of an embedded ARM-based control system for automatic strapping machine is described. This control system uses embedded ARM microprocessor as the core processor, which consists of a STM32 ARM chip and other electronic components. It introduces the general structure, the control method and the implementation of the control system in this paper. The system has many advantages, such as simple and reasonable circuit, stable working performance, simple operation, etc.

ARM Distributed Numerical Control System Design Based on CAN-Bus

2013 ◽  
Vol 415 ◽  
pp. 113-116
Author(s):  
Ji You Fei ◽  
Bin Gao ◽  
Jing Yan Wen
Keyword(s):  
Control System ◽  
System Design ◽  
Distributed Control ◽  
High Speed ◽  
Can Bus ◽  
Numerical Control ◽  
Control System Design ◽  
Numerical Control System ◽  
The Core ◽  
Hardware Circuit

This paper introduces an ARM Distributed Numerical Control System Design Based on CAN-Bus. It analyzed each parts function, hardware circuit and program. The design of interface and the driver of CAN Bus under Linux is the core of this paper. This system combines the distributed control of CAN-Bus with high-speed operation and precision of ARM. Systems resource utilization and real-time has improved. The flexibility and versatility are its advantage.

Development and Validation of a Control-Oriented Model of a Spark-Ignition Direct-Injection Engine

2003 ◽  
Author(s):  
Byungho Lee ◽  
Yann Guezennec ◽  
Giorgio Rizzoni ◽  
Doug Trombley
Keyword(s):  
Control System ◽  
System Design ◽  
Gasoline Engine ◽  
Fuel Injection ◽  
Direct Injection ◽  
Spark Ignition ◽  
Control System Design ◽  
Gasoline Engines ◽  
Engine Model ◽  
Development And Validation

Due to the increasing demands on improved fuel economy and stringent government regulations on tailpipe emissions, many automotive industries and research institutes have been looking for alternative solutions, such as diesel engines, hybrid-electric vehicles, and fuel cell technologies, over conventional port fuel injection (PFI) gasoline engines to meet the demands. On the other hand, many people in the automotive community also realize that there are still a lot of room for improvements in gasoline engine technologies, such as utilizing direct injection and/or variable valve actuation. In order to fully realize the potential benefits of such advanced technologies in gasoline engines, a well-coordinated complex control system design is essential. This paper describes the development and validation of a control-oriented mean-value model for a spark-ignition direct-injection (SIDI) engine to assist and accelerate such coordinated control system design and calibration processes via use of an engine model. The performance and accuracy of the dynamic engine model are evaluated and validated against a set of data for an engine running on a transient driving cycle.

Temperature Auto-Control System Design for Resistor

2014 ◽  
Vol 556-562 ◽  
pp. 2388-2392
Author(s):  
Song Li
Keyword(s):  
Control System ◽  
System Design ◽  
Control System Design ◽  
The Core ◽  
Temperature Detection

The application of Temperature Auto-Control System in agriculture and industry has largely increased the quality of production and reduced workers’ labor. For achieving temperature auto-control of resistor, CX51,as the core of the design. Using the circuits of temperature detection and enlargement,A/D,D/A translators,keyboard,LCD. The propose that controlling resistor working in one temperature and in one time has come true.

Control System Design of Feeding Conveyer in Tomato Automatic Sorting Assembly Line Based on the LOGO!

2013 ◽  
Vol 278-280 ◽  
pp. 1570-1576 ◽  
Author(s):  
Zhang Tao Yin ◽  
Ruo Yu Zhang ◽  
Za Kan ◽  
Ying Lan Jiang ◽  
Xiao Ling Luo ◽  
...  
Keyword(s):  
Control System ◽  
System Design ◽  
Production Line ◽  
Assembly Line ◽  
Control Device ◽  
Control System Design ◽  
The Core ◽  
Automatic Sorting ◽  
Hardware Circuit

To effectively monitor the operation of feeding conveyer in automatic tomato selection assembly line and to avoid loss caused by machine’s breakdown, monitor control system was designed for the production line. The hardware circuit was designed using LOGO！ as the core control device, then the software was development. And two working modes (automatic start and manual start) were assembled in the system. Finally, the system was tested in the tomato automatic sorting assembly line. The results indicate that the system can start the machine quickly and respond immediately to break-down.

Design of Auto Lifting Control System Based on PLC

2014 ◽  
Vol 548-549 ◽  
pp. 1003-1006
Author(s):  
Fu Zhen Qin ◽  
Hai Yan Song ◽  
Xiao Ling Liu ◽  
Hai Chun Niu
Keyword(s):  
Control System ◽  
System Design ◽  
Control System Design ◽  
Mechanical Working ◽  
High Rise ◽  
The Core ◽  
Inspection And Maintenance ◽  
Lifting System ◽  
Working Efficiency ◽  
Working Method

Lifting system is widely applied to different range because it is quite convenient and intelligent, such as high-rise buildings. In order to improve the reliability and equipment working efficiency of the automatic control system, programmable controller (PLC) as the core controller is properly used during the control system design in the paper. Through the mechanical working method, the software control is used instead of more complex relay-contactor control which can greatly improve the mechanical failure inspection and maintenance convenience.

Sign in / Sign up

Export Citation Format

Share Document