Two Phase Boiling Heat Transfer of Water in Minichannel

2017 ◽  
Author(s):  
Ye Tian ◽  
Wei Huang ◽  
Pengfei Li ◽  
Simin Cao ◽  
Yan Sun
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Absolute Error ◽  
Nuclear Industry ◽  
Working Fluid ◽  
Two Phase ◽  
Compact Heat Exchangers ◽  
Compact Size

Printed Circuit Heat Exchangers (PCHE) is a new type of compact heat exchangers, it will be widely used for nuclear industry due to its higher heat transfer area density, compact size, and design flexibility. The hydraulic diameter of PCHE tubes ranges from 1mm to 2mm which belongs to mini-channel according to Kandlikar and Grande (2003)’s study.[1] In this paper, two-phase flow boiling heat transfer of water in mini-channel is discussed. The most of previous literatures in this field mainly focused on flow boiling of refrigerants, but the main working fluid in PCHE tubes is water. A composite correlation of flow boiling of water through mini-channel has been developed on basis of a database of water in this paper. Mean absolute error (MAE) method is used to evaluate relative error. Comparing with the experimental data, the MAE of the new correlation is 23.4%.

A Modified Correlation for Flow Boiling Heat Transfer in Plate Heat Exchangers

2019 ◽  
Author(s):  
Tong Lv ◽  
Boren Zheng ◽  
Wei Li ◽  
Zahid Ayub
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Plate Heat ◽  
Error Band ◽  
Flow Boiling Heat Transfer ◽  
Compact Size ◽  
Wide Range ◽  
Data Points

Abstract Corrugated plate heat exchangers are increasingly used in two-phase flow applications for their flexible and compact size and the efficient heat transfer performance. This paper presents a review of recent studies on the subject and creates a database containing 533 data points from experiment studies. The collected database covers seven working fluids, a wide range of vapor quality (both mean and local) 0.01–0.94, heat flux 0.5–46 kW m−2, mass flux 5.5–137 kg m−2 s−1, chevron angle 30°–70°, and hydraulic diameter 1.7–4.0 mm. Based on the database a brief comparison between several previous correlations are discussed. A new prediction method for flow boiling heat transfer coefficient is generated by multiple regression analysis and modifying an existing correlation. It was observed that the modified correlation shows a better agreement and predicts 74.3% of data points within ±30% error band and 94.9% within ±50% error band.

Proposed Correlation for Forced Convection Boiling Heat Transfer in Mini and Micro Channels With CO2 as a Fluid

2014 ◽  
Author(s):  
Mayank I. Vyas ◽  
Salim A. Channiwala ◽  
Mitesh N. Prajapati
Keyword(s):  
Heat Transfer ◽  
Boiling Heat Transfer ◽  
Two Phase Flow ◽  
Flow Boiling ◽  
Nucleate Boiling ◽  
Working Fluid ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Boiling Heat Transfer ◽  
Micro Channels

After reviewing the available literature on flow boiling heat transfer in mini/micro tubes and channels, it is felt that there is need for predictive correlations which is applicable over wide range of parameters. In present work a new correlation for two-phase flow boiling heat transfer coefficient is developed, which has considered nucleate boiling and convective boiling heat transfer effect. To develop this correlation we have considered total 651 data points, which have been collected from the open available literature covering different operational conditions and different dimensions of channels. We have selected CO2 as a working fluid because it does not contain chlorine, hence an efficient and environmentally safe refrigerant and would be potential replacement for R-22. CO2 has unusual heat transfer and two-phase flow characteristics, and is very different from those of conventional refrigerant. Also a comparison of present correlation with the best published correlation for CO2 is done. The results of this comparison indicate that the new developed correlation is superior to published best correlation for CO2. Present correlation is also compared with best published correlation for all fluids and with the correlation developed by using CO2 data. The results of these both case, indicate that the present correlation is superior.

A Modified Correlation for Flow Boiling Heat Transfer in Plate Heat Exchangers

2020 ◽  
Vol 12 (6) ◽  
Author(s):  
Wei Li ◽  
Boren Zheng ◽  
Tong Lv ◽  
Zahid Ayub
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Dimensionless Number ◽  
Plate Heat ◽  
Flow Boiling Heat Transfer ◽  
Compact Size ◽  
Wide Range ◽  
Data Points

Abstract Corrugated plate heat exchangers are increasingly used in two-phase flow applications for their flexible compact size and efficient heat transfer performance. This paper presents a brief review of recent studies on the flow boiling in plate heat exchangers and creates a database containing 533 data points from previous experimental studies. The collected database covers seven working fluids, a wide range of vapor quality (both mean and local) 0.01–0.94, heat flux 0.5–46 kW m−2, mass flux 5.5–137 kg m−2 s−1, chevron angle 30–70 deg, and hydraulic diameter 1.7–4.0 mm. Based on the database a brief comparison between several previous correlations are discussed. A new prediction method for flow boiling heat transfer coefficient is developed by multiple regression analysis and modifying an existing correlation. A criterion proposed by Li and Wu about the transition from micro- to macroscale was introduced with a combined dimensionless number Bd·Rel0.5 which attempts to comprehensively consider four types of forces during flow boiling. It was observed that the modified correlation shows a better agreement and predicts 74.3% and 94.9% of total data points within ±30% and ±50% error bands, respectively.

Integrate Monolithic Nanostructures in Microchannels to Enhance Flow Boiling Heat Transfer of HFE-7000

2015 ◽  
Author(s):  
Fanghao Yang ◽  
Xiaochuan Li ◽  
Wenming Li ◽  
Chen Li
Keyword(s):  
Heat Transfer ◽  
Heat Sink ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Working Fluid ◽  
Microchannel Heat Sink ◽  
Two Phase ◽  
Dielectric Fluids ◽  
Flow Boiling Heat Transfer ◽  
Two Phase Heat Transfer

Two-phase microchannel heat sink is promising in cooling high power electronics with dielectric fluids. Compared to water, dielectric fluids can assure system safety in case of working fluid leakage. However, two-phase heat transfer of these hydrofluorocarbon refrigerants is restricted by their relatively low thermal conductivities and low latent heats. Numerous nanoscale/submicron structures have been developed to enhance the single and two-phase heat transfer in microchannels; but these techniques usually require nanoparticle seeds in multi-step wet processes or nanolithography to integrate these nanostructures. Therefore, most of these techniques were time-consuming and costly. In this study, we present a plasma etching method using a modified Bosch process to create silicon tips with nanoscale scallops in microchannels. This is a rapid and cost-effective method to integrate large density of nucleation sites without involving nanolithography method or using nanoparticle seeds. Then, these silicon tip arrays were aligned with side walls of microchannels. As a result, flow boiling heat transfer of a dielectric refrigerant, HFE-7000, is substantially enhanced in a microchannel heat sink (five parallel channels: 10 mm L × 220 μm W × 250 μm H). Compared to plain-wall microchannels, the average junction temperature can be reduced up to 10 °C at a heat flux of 55 W/cm2 and the equivalent thermal resistance of microchannel heat sink is reduced up to 31% at a mass flux of 1018 kg/m2·s.

scholarly journals Effect of Nanofluids on the Enhancement of Boiling Heat Transfer: A Review

2021 ◽  
Vol 6 (4) ◽  
pp. 259-283
Author(s):  
Md. Osman Ali ◽  
Mohammad Zoynal Abedin ◽  
Md. Dulal Ali ◽  
Mohammad Rasel Rasel
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Critical Heat Flux ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Pool Boiling ◽  
Working Fluid ◽  
Two Phase ◽  
Enhancement Of Heat Transfer ◽  
Passive Techniques

Boiling heat transfer can play a vital role in the two-phase flow applications. The analysis of the boiling hat transfer enhancement is of importance in such applications and the enhancement can be mostly conducted by using various active and passive techniques. One type of passive techniques is the enhancement of heat transfer by nanofluids. This article presents an extensive review on the effect of different nanofluids on the enhancement of heat transfer coefficient (HTC) and critical heat flux (CHF) for both pool as well as flow boiling. Nanoparticles addition to a working fluid is done arbitrarily to improve the thermophysical properties which in turn improves heat transfer rate. Numerous works have been done in the studies on nanofluid boiling. Among various nanoparticles, the most frequently used nanoparticles are Al2O3 and TiO2. In the case of binary nanoparticles, the most commonly used combination is Al2O3 and TiO2. After reviewing the relevant literatures, it is found that for pool boiling, the maximum HTC is increased to 138% for TiO2 nanoparticles and the maximum CHF is increased to 274.2% for MWCNTs. Conversely, in flow boiling the maximum HTC is increased to 126% for ZnO nanoparticles and the maximum CHF increased to as 100% for GO nanoparticles. In addition, when two or more nanoparticles in succession or binary nanofluids are used the CHF in pool boiling increased up to 100% for Al2O3 and TiO2 as well as the CHF in flow boiling increased up to 100% for Al2O3, ZnO, and Diamond. Though the information of the coefficient of heat transfer and the critical heat flux varied for different nanofluids and vary from experiment to experiment for each of the nanofluids. This variation happens because the coefficient of heat transfer and the critical heat flux in boiling is dependent upon several factors.

Visualization of Boiling Heat Transfer on Micro Porous Coated Surface in Confined Space

2013 ◽  
Author(s):  
Chien-Yuh Yang ◽  
Chien-Fu Liu
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Boiling Heat Transfer ◽  
Heat Transfer Performance ◽  
Heating Surface ◽  
Nucleate Boiling ◽  
Confined Space ◽  
Two Phase ◽  
Nucleate Boiling Heat Transfer ◽  
Coated Surface

Numerous researches have been developed for pool boiling on microporous coated surface in the past decade. The nucleate boiling heat transfer was found to be increased by up to 4.5 times than that on uncoated surface. Recently, the two-phase micro heat exchangers have been considered for high flux electronic devices cooling. The enhancement techniques for improving the nucleate boiling heat transfer performance in the micro heat exchangers have gotten more importance. Previous studies of microporous coatings, however, have been restricted to boiling in unconfined space. No studies have been made on the feasibility of using microporous coatings for enhancing boiling in confined spaces. This study provides an experimental observation of the vapor generation and leaving processes on microporous coatings surface in a 1-mm confined space. It would be helpful for understanding the mechanism of boiling heat transfer and improving the design of two-phase micro heat exchangers. Aluminum particles of average diameter 20 μm were mixed with a binder and a carrier to develop a 150 μm thickness boiling enhancement paint on a 3.0 cm by 3.0 cm copper heating surface. The heating surface was covered by a thin glass plate with a 1 mm spacer to form a 1 mm vertical narrow space for the test section. The boiling phenomenon was recorded by a high speed camera. In addition to the three boiling regimes observed by Bonjour and Lallemand [1], i.e., isolated deformed bubbles, coalesced bubbles and partial dryout at low, moderate and high heat fluxes respectively in unconfined space, a suction and blowing process was observed at the highest heat flux condition. Owing to the space confinement, liquid was sucked and vapor was expelled periodically during the bubble generation process. This mechanism significantly enhanced the boiling heat transfer performance in confined space.

A Fundamental View of the Flow Boiling Heat Transfer Characteristics of Nano-Refrigerants

2012 ◽  
Author(s):  
Lorenzo Cremaschi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Liquid Phase ◽  
Transfer Coefficient ◽  
Boiling Heat Transfer ◽  
Flow Boiling ◽  
Working Fluid ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow Boiling Heat Transfer

Driven by higher energy efficiency targets and industrial needs of process intensification and miniaturization, nanofluids have been proposed in energy conversion, power generation, chemical, electronic cooling, biological, and environmental systems. In space conditioning and in cooling systems for high power density electronics, vapor compression cycles provide cooling. The working fluid is a refrigerant and oil mixture. A small amount of lubricating oil is needed to lubricate and to seal the sliding parts of the compressors. In heat exchangers the oil in excess penalizes the heat transfer and increases the flow losses: both effects are highly undesired but yet unavoidable. This paper studies the heat transfer characteristics of nanorefrigerants, a new class of nanofluids defined as refrigerant and lubricant mixtures in which nano-size particles are dispersed in the high-viscosity liquid phase. The heat transfer coefficient is strongly governed by the viscous film excess layer that resides at the wall surface. In the state-of-the-art knowledge, while nanoparticles in the refrigerant and lubricant mixtures were recently experimentally studied and yielded convective in-tube flow boiling heat transfer enhancements by as much as 101%, the interactions of nanoparticles with the mixture still pose several open questions. The model developed in this work suggested that the nanoparticles in this excess layer generate a micro-convective mass flux transverse to the flow direction that augments the thermal energy transport within the oil film in addition to the macroscopic heat conduction and fluid convection effects. The nanoparticles motion in the shearing-induced and non-uniform shear rate field is added to the motion of the nanoparticles due to their own Brownian diffusion. The augmentation of the liquid phase thermal conductivity was predicted by the developed model but alone it did not fully explain the intensification on the two-phase flow boiling heat transfer coefficient reported in previous work in the literature. Thus, additional nano- and micro-scale heat transfer intensification mechanisms were proposed.

scholarly journals Effect of Metal Foam Insert Configurations on Flow Boiling Heat Transfer and Pressure Drop in a Rectangular Channel

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4617
Author(s):  
Sanghyun Nam ◽  
Dae Yeon Kim ◽  
Youngwoo Kim ◽  
Kyung Chun Kim
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Mass Flux ◽  
Test Section ◽  
Boiling Heat Transfer ◽  
Metal Foam ◽  
Flow Boiling ◽  
Rectangular Channel ◽  
Saturation Pressure ◽  
Two Phase

Heat transfer under flow boiling is better in a rectangular channel filled with open-cell metal foam than in an empty channel, but the high pressure drop is a drawback of the empty channel method. In this study, various types of metal foam insert configurations were tested to reduce the pressure drop while maintaining high heat transfer. Specifically, we measured the boiling heat transfer and pressure drop of a two-phase vertical upward flow of R245fa inside a channel. To measure the pressure and temperature differences of the metal foam, differential pressure transducers and T-type thermocouples were used at both ends of the test section. While the saturation pressure was kept constant at 5.9 bar, the steam quality at the inlet of the test section was changed from 0.05 to 0.99. The channel height, moreover, was 3 mm, and the mass flux ranged from 133 to 300 kg/m2s. The two-phase flow characteristics were observed through a high-speed visualization experiment. Heat transfer tended to increase with the mean vapor quality, and, as expected, the fully filled metal foam channel offered the highest thermal performance. The streamwise insert pattern model had the lowest heat transfer at a low mass flux. However, at a higher mass flux, the three different insert models presented almost the same heat transfer coefficients. We found that the streamwise pattern model had a very low pressure drop compared to that of the spanwise pattern models. The goodness factors of the flow area and the core volume of the streamwise patterned model were higher than those of the full-filled metal foam channel.

Comparison of 30 Boiling and Condensation Correlations for Two-Phase Flows in Compact Plate-Fin Heat Exchangers

2017 ◽  
Author(s):  
Wenhai Li ◽  
Ken Alabi ◽  
Foluso Ladeinde
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Flow Boiling ◽  
Transfer Coefficients ◽  
Two Phase Flows ◽  
Two Phase ◽  
Heat Transfer Coefficients ◽  
Heat Exchanger Design ◽  
Micro Channels ◽  
Vertical Tubes

Over the years, empirical correlations have been developed for predicting saturated flow boiling [1–15] and condensation [16–30] heat transfer coefficients inside horizontal/vertical tubes or micro-channels. In the present work, we have examined 30 of these models, and modified many of them for use in compact plate-fin heat exchangers. However, the various correlations, which have been developed for pipes and ducts, have been modified in our work to make them applicable to extended fin surfaces. The various correlations have been used in a low-order, one-dimensional, finite-volume type numerical integration of the flow and heat transfer equations in heat exchangers. The NIST’s REFPROP database [31] is used to account for the large variations in the fluid thermo-physical properties during phase change. The numerical results are compared with Yara’s experimental data [32]. The validity of the various boiling and condensation models for a real plate-fin heat exchanger design is discussed. The results show that some of the modified boiling and condensation correlations can provide acceptable prediction of heat transfer coefficient for two-phase flows in compact plate-fin heat exchangers.

Sign in / Sign up

Export Citation Format

Share Document