Hydrotreated Algae Renewable Fuel Performance in a Military Diesel Engine

2012 ◽  
Author(s):  
Patrick A. Caton ◽  
Sherry A. Williams ◽  
Richard A. Kamin ◽  
Dianne Luning-Prak ◽  
Leonard J. Hamilton ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Vegetable Oil ◽  
Diesel Fuel ◽  
Renewable Diesel ◽  
Load Range ◽  
Brake Torque ◽  
Renewable Fuel ◽  
Engine Efficiency

A vegetable oil from algae has been processed into a Hydrotreated Renewable Diesel (HRD) fuel. This HRD fuel was tested in an extensively instrumented legacy military diesel engine along with conventional Navy diesel fuel. Both fuels performed well across the speed-load range of this HMMWV engine. The high cetane value of the HRD (77 v. 43) leads to significantly shorter ignition delays with associated longer combustion durations and modestly lower peak cylinder pressures as compared to diesel fuel operation. Both brake torque and brake fuel consumption are better (5–10%) with HRD due to the cumulative IMEP effect with moderatly longer combustion durations. Carbon dioxide emmisions are considerably lower with HRD due to the improved engine efficiency as well the more advantageous hydrogen-carbon ratio of this HRD fuel.

Renewable Fuel Performance in a Legacy Military Diesel Engine

2011 ◽  
Author(s):  
Leonard J. Hamilton ◽  
Sherry A. Williams ◽  
Richard A. Kamin ◽  
Matthew A. Carr ◽  
Patrick A. Caton ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Vegetable Oil ◽  
Ignition Delay ◽  
Jet Fuel ◽  
Combustion Characteristics ◽  
Load Range ◽  
Engine Torque ◽  
Brake Torque ◽  
Renewable Fuel

A new Hydrotreated Vegetable Oil (HVO) from the camelina plant has been processed into a Hydrotreated Renewable Jet (HRJ) fuel. This HRJ fuel was tested in an extensively instrumented legacy military diesel engine along with conventional Navy jet fuel JP-5. Both fuels performed well across the speed-load range of this HMMWV engine. The high cetane value of the HRJ leads to modestly shorter ignition delay. The longer ignition delay of JP-5 delivers shorter overall combustion durations, with associated higher indicated engine torque levels. Both brake torque and brake fuel consumption are better with conventional JP-5 by up to ten percent, due to more ideal combustion characteristics.

Effects of Hydrotreated Vegetable Oil (HVO) as Renewable Diesel Fuel on Combustion and Exhaust Emissions in Diesel Engine

2011 ◽  
Vol 5 (1) ◽  
pp. 205-217 ◽  
Author(s):  
Kouseki Sugiyama ◽  
Isamu Goto ◽  
Koji Kitano ◽  
Kazuhisa Mogi ◽  
Markku Honkanen
Keyword(s):  
Diesel Engine ◽  
Vegetable Oil ◽  
Diesel Fuel ◽  
Exhaust Emissions ◽  
Renewable Diesel

DIESEL ENGINE OPERATION IN USE OF FUEL WITH ADDITIVES

2018 ◽  
pp. 18-24
Author(s):  
Petar Kazakov ◽  
Atanas Iliev ◽  
Emil Marinov
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Experimental Studies ◽  
Combustion Engines ◽  
Engine Operation ◽  
Factors Affecting ◽  
Operating Modes ◽  
Positive Effects

Over the decades, more attention has been paid to emissions from the means of transport and the use of different fuels and combustion fuels for the operation of internal combustion engines than on fuel consumption. This, in turn, enables research into products that are said to reduce fuel consumption. The report summarizes four studies of fuel-related innovation products. The studies covered by this report are conducted with diesel fuel and usually contain diesel fuel and three additives for it. Manufacturers of additives are based on already existing studies showing a 10-30% reduction in fuel consumption. Comparative experimental studies related to the use of commercially available diesel fuel with and without the use of additives have been performed in laboratory conditions. The studies were carried out on a stationary diesel engine СМД-17КН equipped with brake КИ1368В. Repeated results were recorded, but they did not confirm the significant positive effect of additives on specific fuel consumption. In some cases, the factors affecting errors in this type of research on the effectiveness of fuel additives for commercial purposes are considered. The reasons for the positive effects of such use of additives in certain engine operating modes are also clarified.

STUDI PENENTUAN KOMPOSISI OPTIMUM CAMPURAN BAHAN BAKAR BIODIESEL–PETRODIESEL

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Soni S. Wirawan dkk
Keyword(s):  
Carbon Monoxide ◽  
Particulate Matter ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Cetane Number ◽  
Price Policy ◽  
Oxides Of Nitrogen ◽  
Fuel Price ◽  
Biodiesel Blend

Biodiesel is a viable substitute for petroleum-based diesel fuel. Its advantages are improved lubricity, higher cetane number and cleaner emission. Biodiesel and its blends with petroleum-based diesel fuel can be used in diesel engines without any signifi cant modifi cations to the engines. Data from the numerous research reports and test programs showed that as the percent of biodiesel in blends increases, emission of hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM) all decrease, but the amount of oxides of nitrogen (NOx) and fuel consumption is tend to increase. The most signifi cant hurdle for broader commercialization of biodiesel is its cost. In current fuel price policy in Indonesia (especially fuel for transportation), the higher percent of biodiesel in blend will increase the price of blends fuel. The objective of this study is to assess the optimum blends of biodiesel with petroleum-based diesel fuel from the technically and economically consideration. The study result recommends that 20% biodiesel blend with 80% petroleum-based diesel fuel (B20) is the optimum blend for unmodifi ed diesel engine uses.Keywords: biodiesel, emission, optimum, blend

OPTIMIZATION OF GAS-DIESEL ENGINE REGULATION AS A METHOD OF IMPROVING ITS ECOLOGICAL CHARACTERISTICS

2021 ◽  
pp. 28-32
Author(s):  
VALERIY L. CHUMAKOV ◽  
Keyword(s):  
Carbon Monoxide ◽  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Diesel Fuel ◽  
Hydrocarbon Fuel ◽  
Load Range ◽  
Engine Operation ◽  
Exhaust Gases ◽  
Wide Range ◽  
Diesel Cycle

The paper shows some ways to improve the environmental characteristics of a diesel engine using gaseous hydrocarbon fuel and operating the engine in a gas-diesel cycle mode. Some possibilities to reduce toxic components of exhaust gases in a gas-diesel engine operating on liquefi ed propane-butane mixtures have been studied. Experiments carried out in a wide range of load from 10 to 100% and speed from 1400 to 2000 rpm showed that the gas-diesel engine provides a suffi ciently high level of diesel fuel replacement with gas hydrocarbon fuel. The authors indicate some eff ective ways to reduce the toxicity of exhaust gases. The engine power should be adjusted by the simultaneous supply of fuel, gas and throttling the air charge in the intake manifold. This method enriches the fi rst combusting portions to reduce nitrogen oxides and maintains the depletion of the main charge within the fl ammability limits of the gas-air charge to reduce carbon monoxide and hydrocarbons. The authors found that when the engine operates in a gas-diesel cycle mode, the power change provides a decrease in nitrogen oxide emissions of gas-diesel fuel only due to gas supply in almost the entire load range as compared to the pure diesel. At high loads (more than 80%) stable engine operation is ensured up to 90% of diesel fuel replaced by gas. Even at 10% of diesel fuel used the concentration of nitrogen oxides decreases by at least 15…20% as compared with a diesel engine in the entire load range. However, there is an increased emission of hydrocarbons and carbon monoxide in the exhaust gases. Further experimental studies have shown that optimization of the gas diesel regulation can reduce the mass emission of nitrogen oxides contained in exhaust gases in 2…3 times and greatly reduce the emission of incomplete combustion products – carbon monoxide and hydrocarbons.

Impact of hydrocracked diesel fuel and Hydrotreated Vegetable Oil blends on the fuel consumption of automotive diesel engines

Fuel ◽  
2018 ◽  
Vol 222 ◽  
pp. 718-732 ◽  
Author(s):  
Pierpaolo Napolitano ◽  
Chiara Guido ◽  
Carlo Beatrice ◽  
Leonardo Pellegrini
Keyword(s):  
Fuel Consumption ◽  
Vegetable Oil ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Oil Blends ◽  
Vegetable Oil Blends

Optimization of Engine Efficiency for Diesel Engine Equipped With EGR-VGT and Aftertreatment Systems

2019 ◽  
Author(s):  
Kuo Yang ◽  
Pingen Chen
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Engines ◽  
Intrinsic Property ◽  
Nox Emission ◽  
Nox Emissions ◽  
Minimum Phase ◽  
Engine Efficiency ◽  
Simulation Results ◽  
Aftertreatment Systems

Abstract Engine efficiency improvement is very critical for medium to heavy-duty vehicles to reduce Diesel fuel consumption and enhance U.S. energy security. The tradeoff between engine efficiency and NOx emissions is an intrinsic property that prevents modern Diesel engines, which are generally equipped with exhaust gas recirculation (EGR) and variable geometry turbocharger (VGT), from achieving the optimal engine efficiency while meeting the stringent NOx emission standards. The addition of urea-based selective catalytic reduction (SCR) systems to modern Diesel engine aftertreatment systems alleviate the burden of NOx emission control on Diesel engines, which in return creates extra freedom for optimizing Diesel engine efficiency. This paper proposes two model-based approaches to locate the optimal operating point of EGR and VGT in the air-path loop to maximize the indicated efficiency of turbocharged diesel engine. Simulation results demonstrated that the engine brake specific fuel consumption (BSFC) can be reduced by up to 1.6% through optimization of EGR and VGT, compared to a baseline EGR-VGT control which considers both NOx emissions and engine efficiency on engine side. The overall equivalent BSFCs are 1.8% higher with optimized EGR and VGT control than with the baseline control. In addition, the influence of reducing EGR valve opening on the non-minimum phase behavior of the air path loop is also analyzed. Simulation results showed slightly stronger non-minimum phase behaviors when EGR is fully closed.

The Effect of Mahua (Madhuca Longfolia) Oil With Dioxane Fuel Blends on Diesel Engine and Studies on Combustion and Emission Characteristics

2009 ◽  
Author(s):  
K. Ashok ◽  
N. Alagumurthi ◽  
C. G. Saravanan
Keyword(s):  
Diesel Engine ◽  
Vegetable Oil ◽  
Diesel Fuel ◽  
Emission Characteristics ◽  
Cylinder Pressure ◽  
Gas Analyzer ◽  
Blend Ratio ◽  
Fuel Blends ◽  
Mahua Oil ◽  
Di Diesel Engine

An organic compound, Dioxane, is blended to reduce the viscosity of raw vegetable oil (Mahua). A dilute blend was prepared by mixing with raw vegetable oil (Mahua) and 10% dioxane in volume basis. Tests were conducted on a single cylinder, water cooled, DI diesel engine coupled with the eddy current dynamometer. Emissions like HC, NOX, etc., were measured by using gas analyzer and smoke density was measured by using smoke meter. The cylinder pressure, heat release rate were measured by combustion analyzer. From the experimental investigation, it was observed that operating at a blend ratio of 10% diesel-80% mahua oil-10% Dioxane significantly reduced the HC and NOx emissions when compared to diesel fuel. It was also observed, the variation of break thermal efficiency is almost same to that of diesel fuel. Hence, it can be concluded that raw vegetable oil (mahua) with Dioxane blend could partially replace the diesel, as a fuel.

Sign in / Sign up

Export Citation Format

Share Document