Natural Convection in Cubic and Rhomb-Shaped Enclosures

2013 ◽  
Author(s):  
Milorad B. Dzodzo
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Temperature Fields ◽  
Nusselt Numbers ◽  
Different Temperatures ◽  
Vertical Walls ◽  
Laminar Natural Convection ◽  
Velocity And Temperature Fields ◽  
Prandtl Numbers ◽  
Volume Method

Laminar natural convection in cubic and rhomb–shaped enclosures (rhomb angles 59°, 44° and 28.2°) with two opposite vertical walls kept at different temperatures was investigated experimentally and numerically. The enclosures were filled with glycerol and the Rayleigh (Ra) and Prandtl (Pr) numbers ranged from 2,000<Ra<369,000 and 2,680<Pr<7,000. The visualization of the velocity and temperature fields was obtained by using Plexiglass and liquid crystal particles as tracers. The finite volume method based on the finite difference approach was applied for numerical analysis. The velocity and temperature fields and average Nusselt numbers were found as a function of the Reyleigh and Prandtl numbers. Comparison of the average Nusselt numbers for cubic and rhomb-shaped enclosures indicates decrease of heat transfer for the cases when the lower and upper vertical walls of the rhomb-shaped enclosures are at lower and higher temperatures, respectively. This is due to the tendency of fluid stratification in the lower and upper corners.

scholarly journals Natural Convection in Undivided and Partially Divided Rectangular Enclosures

1981 ◽  
Vol 103 (4) ◽  
pp. 623-629 ◽  
Author(s):  
M. W. Nansteel ◽  
R. Greif
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Temperature Fields ◽  
Transitional Flow ◽  
Two Dimensional ◽  
Injection Flow ◽  
Stabilizing Effect ◽  
Different Temperatures ◽  
Vertical Walls ◽  
Rayleigh Numbers

Heat transfer by natural convection in a two-dimensional rectangular enclosure fitted with partial vertical divisions is investigated experimentally. The horizontal walls of the enclosure are adiabatic while the vertical walls are maintained at different temperatures. The experiments are carried out with water, Pr ≃ 3.5, for Rayleigh numbers in the range, 2.3 × 1010 ⩽ RaL ⩽ 1.1 × 1011, and an aspect ratio, A = H/L = 1/2. The effect of the partial vertical divisions on the fluid flow and temperature fields is investigated by dye-injection flow visualization and by thermocouple probes, respectively. The effect of the partitions on the heat transfer across the enclosure is also studied and correlations for the Nusselt number as a function of RaL and partition length are generated for both conducting and non-conducting partition materials. Partial divisions are found to have a significant effect on the heat transfer; especially when the divisions are adiabatic. The results also indicate that the partial divisions may have a stabilizing effect on the laminar-transitional flow on the heated vertical walls of the enclosure.

An Analytical Study of Natural Convective Heat Transfer within a Trapezoidal Enclosure

1980 ◽  
Vol 102 (4) ◽  
pp. 640-647 ◽  
Author(s):  
L. Iyican ◽  
Y. Bayazitogˇlu ◽  
L. C. Witte
Keyword(s):  
Heat Transfer ◽  
Analytical Study ◽  
Temperature Fields ◽  
Nusselt Numbers ◽  
Method Of Solution ◽  
Different Temperatures ◽  
Nonlinear Form ◽  
Trapezoidal Enclosure ◽  
Energy Equations ◽  
Rayleigh Numbers

The natural convection motion and the heat transfer within a trapezoidal enclosure with parallel cylindrical top and bottom walls at different temperatures and plane adiabatic sidewalls are studied. Two-dimensional natural convective fields for a range of Rayleigh numbers, up to 2.7 × 106, and enclosure tilt angles, 0 to 180 deg measured from vertical, are investigated. The Galerkin’s method of solution is applied to nonlinear form of the momentum and energy equations to determine the velocity and temperature fields. The average and local Nusselt numbers are also presented.

A Pseudospectral Analysis of Laminar Natural Convection Flow and Heat Transfer Between Two Inclined Parallel Plates

2006 ◽  
Author(s):  
Serkan Kasapoglu ◽  
Ilker Tari
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Boussinesq Approximation ◽  
Temperature Fields ◽  
Convection Flow ◽  
Parallel Plates ◽  
Natural Convection Flow ◽  
Constant Wall Temperature ◽  
Laminar Natural Convection

Three dimensional laminar natural convection flow of and heat transfer in incompressible air between two inclined parallel plates are analyzed with the Boussinesq approximation by using spectral methods. The plates are assumed to be infinitely long in streamwise (x) and spanwise (z) directions. For these directions, periodic boundary conditions are used and for the normal direction (y), constant wall temperature and no slip boundary conditions are used. Unsteady Navier-Stokes and energy equations are solved using a pseudospectral approach in order to obtain velocity and temperature fields inside the channel. Fourier series are used to expand the variables in × and z directions, while Chebyshev polynomials are used to expand the variables in y direction. By using the temperature distribution between the plates, local and average Nusselt numbers (Nu) are calculated. Nu values are correlated with φ, which is the inclination angle, and with Ra·cosφ to compare the results with the literature.

Natural Convection on Both Sides of a Vertical Wall Separating Fluids at Different Temperatures

1980 ◽  
Vol 102 (4) ◽  
pp. 630-635 ◽  
Author(s):  
R. Anderson ◽  
A. Bejan
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Thermal Resistance ◽  
Analytical Study ◽  
Vertical Wall ◽  
Conducting Wall ◽  
Different Temperatures ◽  
Laminar Natural Convection ◽  
Layer Flow ◽  
Two Sides

This paper describes an analytical study of laminar natural convection on both sides of a vertical conducting wall of finite height separating two semi-infinite fluid reservoirs of different temperatures. The countercurrent boundary layer flow formed on the two sides is illustrated via representative streamlines, temperature and heat flux distributions. The net heat transfer between reservoirs is reported for the general case in which the wall thermal resistance is not negligible relative to the overall reservoir-to-reservoir thermal resistance.

Magnetohydrodynamic Natural Convection Heat Transfer of Hybrid Nanofluid in a Square Enclosure in the Presence of a Wavy Circular Conductive Cylinder

2019 ◽  
Vol 12 (3) ◽  
Author(s):  
Tahar Tayebi ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Flow Characteristics ◽  
Hybrid Nanofluid ◽  
Square Enclosure ◽  
Convection Problem ◽  
Laminar Natural Convection ◽  
Natural Convection Problem ◽  
Volume Method

Abstract In this paper, steady natural convective heat transfer and flow characteristics of Al2O3-Cu/water hybrid nanofluid filled square enclosure in the presence of magnetic field has been investigated numerically. The enclosure is equipped with a wavy circular conductive cylinder. The natural convection in the cavity is induced by a temperature difference between the vertical left hot wall and the other right cold wall. The steady 2-D equations of laminar natural convection problem for Newtonian and incompressible mixture are discretized using the finite volume method. The effective thermal conductivity and viscosity of the hybrid nanofluid are calculated using Corcione correlations taking into consideration the Brownian motion of the nanoparticles. A numerical parametric investigation is carried out for different values of the nanoparticles volumic concentration, Hartmann number, Rayleigh number, and the ratio of fluid to solid thermal conductivities. According to the results, the corrugated conductive block plays an important role in controlling the convective flow characteristic and the heat transfer rate within the system.

Natural Convection Patterns in Right-Angled Triangular Cavities with Heated Vertical Sides and Cooled Hypotenuses

2005 ◽  
Vol 127 (10) ◽  
pp. 1181-1186 ◽  
Author(s):  
El Hassan Ridouane ◽  
Antonio Campo ◽  
Jane Y. Chang
Keyword(s):  
Natural Convection ◽  
Vertical Wall ◽  
Ambient Air ◽  
Correlation Equation ◽  
Apex Angle ◽  
Cross Sectional ◽  
Vertical Walls ◽  
Laminar Natural Convection ◽  
Convection Patterns ◽  
Volume Method

The present investigation deals with the numerical computation of laminar natural convection in a gamma of right-angled triangular cavities filled with air. The vertical walls are heated and the inclined walls are cooled while the upper connecting walls are insulated from the ambient air. The defining apex angle α is located at the lower vertex formed between the vertical and inclined walls. This unique kind of cavity may find application in the miniaturization of electronic packaging severely constrained by space and/or weight. The finite volume method is used to perform the computational analysis encompassing a collection of apex angles α compressed in the interval that extends from 5° to 63°. The height-based Rayleigh number, being unaffected by the apex angle α, ranges from a low 103 to a high 106. Numerical results are reported for the velocity field, the temperature field and the mean convective coefficient along the heated vertical wall. Overall, the matching between the numerically predicted temperatures and the experimental measurements of air at different elevations inside a slim cavity is of ordinary quality. For purposes of engineering design, a Nu¯H correlation equation was constructed and also a figure-of-merit ratio between the Nu¯H and the cross sectional area A of the cavity was proposed.

Effect of Surface Radiation on Conjugate Natural Convection in a Square Enclosure with a Tube at Different Locations

2013 ◽  
Vol 281 ◽  
pp. 190-196 ◽  
Author(s):  
Jian Sheng Wang ◽  
Yong Xu
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Heat Transfer Performance ◽  
Convection Heat Transfer ◽  
Surface Radiation ◽  
Square Enclosure ◽  
Conjugate Natural Convection ◽  
Different Temperatures ◽  
Vertical Walls ◽  
Effect Of Surface

The conjugate natural convection heat transfer with and without the interaction of the surface radiation in a square enclosure was carried out by numerical simulation. The vertical walls of the square enclosure were heated with different temperatures, and the others were adiabatic. A circular tube was inserted into the square enclosure. It was observed that varied location of the tube center can lead to different motion and heat transfer intensities. In addition, surface radiation reduces the convective heat transfer in the square enclosure compared to the pure natural convection case and enhances the overall heat transfer performance.

Experimental Investigation of Natural Convection in Partitioned Enclosures

1982 ◽  
Vol 104 (3) ◽  
pp. 527-532 ◽  
Author(s):  
S. M. Bajorek ◽  
J. R. Lloyd
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Core Region ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
The Core ◽  
Different Temperatures ◽  
Vertical Walls ◽  
Good Agreement

Natural convection heat transfer within a two-dimensional, partitioned enclosure of aspect ratio 1 was investigated experimentally using a Mach-Zehnder interferometer. The vertical walls were maintained isothermal at different temperatures, while the horizontal walls and the partitions were insulated. Local and average heat-transfer coefficients were determined for the air and carbon dioxide filled enclosures both with and without partitions for Grashof numbers between 1.7×105 and 3.0×106. Good agreement was found between the results in the present study for the nonpartitioned enclosure and those previously published. The partitions were found to significantly influence the convective heat transfer. Observations of the interferometric fringes indicated that the core region is unsteady, with the unsteadiness occasionally affecting the flow along the vertical isothermal walls, beginning at Grashof numbers as low as 5×105.

Sign in / Sign up

Export Citation Format

Share Document