Transient Internal Forced Convection Under Step Wall Heat Flux Condition

2013 ◽  
Author(s):  
M. Fakoor-Pakdaman ◽  
Majid Bahrami
Keyword(s):  
Heat Flux ◽  
Nusselt Number ◽  
Steady State ◽  
Forced Convection ◽  
Analytical Model ◽  
Fluid Velocity ◽  
Wall Heat Flux ◽  
Bulk Temperature ◽  
Steady State Condition ◽  
Long Time

A new closed-form analytical model is developed to predict transient laminar forced convection inside a circular tube following a time-wise step change in the wall heat flux. The proposed all-time model is based on a blending of two asymptotes; i) short-time asymptote: transient pure conduction in an infinite cylinder and ii) long-time asymptote: steady-state convective heat transfer inside a circular duct. Different fluid velocity profiles are taken into consideration and the model covers: i) Slug Flow (SF); ii) Hydrodynamically Fully Developed Flow (HFDF); and iii) Simultaneously Developing Flow (SDF) conditions. The present model is developed for the entire range of the Fourier and Prandtl numbers. As such, short- and long-time asymptotes for the fluid bulk temperature are obtained. The Nusselt number is defined based on the local temperature difference between the tube wall temperature and the fluid bulk temperature. It is shown that irrespective of the velocity profile, at the initial times the Nusselt number is only a function of time. However, at the steady state condition it depends solely upon the axial location. In addition, during the transient period, the Nusselt number is much higher than that of the long-time response. We also performed an independent numerical simulation using COMSOL Multiphysics to validate the present analytical model. The comparison between the numerical and the present analytical model shows good agreement; a maximum relative difference less than 9.1%.

Transient Internal Forced Convection Under Arbitrary Time-Dependent Heat Flux

2013 ◽  
Author(s):  
M. Fakoor-Pakdaman ◽  
M. Andisheh-Tadbir ◽  
Majid Bahrami
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Nusselt Number ◽  
Forced Convection ◽  
Analytical Model ◽  
Time Dependent ◽  
Bulk Temperature ◽  
Fluid Temperature ◽  
Flux Boundary Condition ◽  
Arbitrary Time

A new all-time model is developed to predict transient laminar forced convection heat transfer inside a circular tube under arbitrary time-dependent heat flux. Slug flow condition is assumed for the velocity profile inside the tube. The solution to the time-dependent energy equation for a step heat flux boundary condition is generalized for arbitrary time variations in surface heat flux using a Duhamel’s integral technique. A cyclic time-dependent heat flux is considered and new compact closed-form relationships are proposed to predict: i) fluid temperature distribution inside the tube ii) fluid bulk temperature and iii) the Nusselt number. A new definition, cyclic fully-developed Nusselt number, is introduced and it is shown that in the thermally fully-developed region the Nusselt number is not a function of axial location, but it varies with time and the angular frequency of the imposed heat flux. Optimum conditions are found which maximize the heat transfer rate of the unsteady laminar forced-convective tube flow. We also performed an independent numerical simulation using ANSYS to validate the present analytical model. The comparison between the numerical and the present analytical model shows great agreement; a maximum relative difference less than 5.3%.

Unsteady Laminar Forced-Convective Tube Flow Under Dynamic Time-Dependent Heat Flux

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
M. Fakoor-Pakdaman ◽  
Mehdi Andisheh-Tadbir ◽  
Majid Bahrami
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Nusselt Number ◽  
Analytical Model ◽  
Time Dependent ◽  
Bulk Temperature ◽  
Fluid Temperature ◽  
Tube Flow ◽  
Flux Boundary Condition ◽  
Arbitrary Time

A new all-time model is developed to predict transient laminar forced convection heat transfer inside a circular tube under arbitrary time-dependent heat flux. Slug flow (SF) condition is assumed for the velocity profile inside the tube. The solution to the time-dependent energy equation for a step heat flux boundary condition is generalized for arbitrary time variations in surface heat flux using a Duhamel's integral technique. A cyclic time-dependent heat flux is considered and new compact closed-form relationships are proposed to predict (i) fluid temperature distribution inside the tube, (ii) fluid bulk temperature and (iii) the Nusselt number. A new definition, cyclic fully developed Nusselt number, is introduced and it is shown that in the thermally fully developed region the Nusselt number is not a function of axial location, but it varies with time and the angular frequency of the imposed heat flux. Optimum conditions are found which maximize the heat transfer rate of the unsteady laminar forced-convective tube flow. We also performed an independent numerical simulation using ansys fluent to validate the present analytical model. The comparison between the numerical and the present analytical model shows great agreement; a maximum relative difference less than 5.3%.

Laminar Forced Convection in Transversely Corrugated Microtubes

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
F. Talay Akyildiz ◽  
Dennis A. Siginer
Keyword(s):  
Heat Flux ◽  
Analytical Solution ◽  
Forced Convection ◽  
Wall Temperature ◽  
Wall Heat Flux ◽  
Bulk Temperature ◽  
Straight Tube ◽  
Computational Domain ◽  
Constant Wall Temperature ◽  
Constant Wall Heat Flux

Forced convection heat transfer in fully developed laminar flow in transversely corrugated tubes is investigated for nonuniform but constant wall heat flux as well as for constant wall temperature. Epitrochoid conformal mapping is used to map the flow domain onto the unit circle in the computational domain. The governing equations are solved in the computational domain analytically. An exact analytical solution for the temperature field is derived together with closed form expressions for bulk temperature and Nusselt number for the case of the constant heat flux at the wall. A variable coefficient Helmholtz eigenvalue problem governs the case of the constant wall temperature. A novel semi-analytical solution based on the spectral Galerkin method is introduced to solve the Helmholtz equation. The solution in both constant wall heat flux and constant wall temperature case is shown to collapse onto the well-known results for the circular straight tube for zero waviness.

Effect of viscous dissipation on forced convection for laminar flow through a straight regular polygonal duct using BEM method

2018 ◽  
Vol 28 (1) ◽  
pp. 220-238 ◽  
Author(s):  
Tomasz Janusz Teleszewski ◽  
Slawomir Adam Sorko
Keyword(s):  
Heat Flux ◽  
Nusselt Number ◽  
Laminar Flow ◽  
Forced Convection ◽  
Viscous Dissipation ◽  
Wall Temperature ◽  
Bulk Temperature ◽  
Brinkman Number ◽  
Content Type ◽  
Flow Through

Purpose The purpose of this paper is to investigate the effect of the viscous dissipation of laminar flow through a straight regular polygonal duct on forced convection with constant axial wall heat flux with constant peripheral wall temperature using the boundary element method (BEM). Design/methodology/approach Both the wall heating case and the wall cooling case are considered. Applying the velocity profile obtained for the duct laminar flow and the energy equation with the viscous dissipation term is solved exactly for the constant wall heat flux using the BEM. The numerical values are obtained by means of a computer program, written by the authors in Fortran. The results of the BEM approach are verified by analytic models. Nusselt numbers are obtained for flows with a different number of sides of a regular polygonal duct and Brinkman numbers. Findings When the difference in temperature between the wall temperature and the fluid bulk temperature changes the sign, then the functions of the Nusselt number with the Brinkman number generated some singularities (BrqLs). For the Brinkman number referring to the total wall linear power, with the increasing value of the number of sides of a regular polygonal duct, BrqLs decreases in the range of 3 ≤ n < ∞. If the BrqL < BrqLs, it is possible to note that, in general, the Nusselt number is higher for cross-sections having a lower value of the number of sides of a regular polygonal duct. For BrqL > BrqLs, this rule is reversed. Originality/value This paper illustrates the effects of viscous dissipation on laminar forced convective flow in regular polygon ducts with a different number n of sides. A compact relationship for the Nusselt number vs the Brinkman number referring to the temperature difference between the wall temperature and the fluid bulk temperature and the Brinkman number, which is based on the total wall linear power, have been proposed.

Analysis of Transient Laminar Forced Convection of Nanofluids in Circular Channels

2012 ◽  
Author(s):  
İsmail Ozan Sert ◽  
Nilay Sezer-Uzol ◽  
Sadik Kakac
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Flux ◽  
Steady State ◽  
Numerical Analysis ◽  
Forced Convection ◽  
Wall Temperature ◽  
Particle Diameter ◽  
Wall Heat Flux ◽  
Transient And Steady State

In this study, forced convection heat transfer characteristics of nanofluids are investigated by numerical analysis of incompressible transient laminar flow in a circular duct under step change in wall temperature and wall heat flux. The thermal responses of the system are obtained by solving energy equation under both transient and steady-state conditions for hydrodynamically fully developed flow. In the analyses, temperature dependent thermo-physical properties are also considered. In the numerical analysis, Al2O3/water nanofluid is assumed as a homogenous single-phase fluid. For the effective thermal conductivity of nanofluids, Hamilton-Crosser model is used together with a model for Brownian motion in the analysis which takes the effects of temperature and the particle diameter into account. Temperature distributions across the tube for a step jump of wall temperature and also wall heat flux are obtained for various times during the transient calculations at a given location for a constant value of Peclet number and a particle diameter. Variations of thermal conductivity in turn, heat transfer enhancement is obtained at various times as a function of nanoparticle volume fractions, at a given nanoparticle diameter and Peclet number. The results are given under transient and steady-state conditions; steady-state conditions are obtained at larger times and enhancements are found by comparison to the base fluid heat transfer coefficient under the same conditions.

Fluid-to-Fluid Conjugate Heat Transfer for a Vertical Pipe—Internal Forced Convection and External Natural Convection

1980 ◽  
Vol 102 (3) ◽  
pp. 402-407 ◽  
Author(s):  
E. M. Sparrow ◽  
M. Faghri
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Nusselt Number ◽  
Natural Convection ◽  
Forced Convection ◽  
Wall Temperature ◽  
Bulk Temperature ◽  
Vertical Pipe ◽  
Uniform Wall Temperature ◽  
Uniform Wall

An analysis is made of the interactive heat transfer problem involving forced convection flow in a vertical pipe and natural convection boundary layer flow external to the pipe. Both flows are laminar. Solutions of the conservation equations for mass, momentum, and energy were obtained numerically by an iterative scheme which deals successively with the internal and external flows. Remarkably rapid convergence was achieved by adopting a procedure whereby information is transferred between the two flows via heat transfer coefficients rather than via the wall or bulk temperatures or the heat flux. Results are presented for the axial distributions of the internal and external Nusselt numbers, of the wall temperature, and of the bulk temperature of the internal flow—all as a function of three parameters. It was found that at any (dimensionless) axial station, the pipe Nusselt number is insensitive to the parameters and is bounded between the values for uniform wall temperature and uniform wall heat flux. On the other hand, the external natural convection Nusselt number is highly sensitive to the parameters and departs substantially from the standard uniform wall temperature results.

Estimating the Wall Heat Flux of Unsteady Conjugated Forced Convection Between Two Corotating Disks Using an Inverse Solution Scheme

2008 ◽  
Vol 130 (12) ◽  
Author(s):  
David T. W. Lin ◽  
Hung Yi Li ◽  
Wei Mon Yan
Keyword(s):  
Heat Flux ◽  
Forced Convection ◽  
Boundary Surface ◽  
Temperature Sensors ◽  
Inverse Solution ◽  
Wall Heat Flux ◽  
Unknown Boundary ◽  
Measured Temperature ◽  
Solution Scheme ◽  
Good Agreement

An inverse solution scheme based on the conjugate gradient method with the minimization of the object function is presented for estimating the unknown wall heat flux of conjugated forced convection flows between two corotating disks from temperature measurements acquired within the flow field. The validity of the proposed approach is demonstrated via the estimation of three time- and space-dependent heat flux profiles. A good agreement is observed between the estimated results and the exact solution in every case. In general, the accuracy of the estimated results is found to improve as the temperature sensors are moved closer to the unknown boundary surface and the error in the measured temperature data is reduced.

Sign in / Sign up

Export Citation Format

Share Document