Numerical Simulation of a Compression Ignition Engine Using Biodiesel Fuel

2003 ◽  
Author(s):  
C. Purohit ◽  
K. Aung
Keyword(s):  
Numerical Simulations ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Current Model ◽  
Pollutant Emissions ◽  
Biodiesel Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Ci Engine ◽  
Ci Engines

Increasing concerns over pollutant emissions from diesel engines have prompted researchers to find replacement fuels for diesel engines. The use of alternative fuels such as biodiesel in compression-ignition (CI) engines is beneficial to the environment as it reduces emissions of pollutants with slight penalty on the performance. This paper investigated the use of biodiesel fuel (rapeseed oil) in a CI engine by numerical simulations. The numerical simulations were based on the models of finite heat release, cylinder heat transfer, and friction losses. Simulations were carried out to evaluate the effects of compression ratio, equivalence ratio, and engine speed on the performance of the CI engine. The results of the simulations were compared with experimental data from the literature to validate the simulations. Good agreements between the computed and experimental results were obtained. The results showed that the current model could satisfactorily predict the performance of a biodiesel-fueled CI engine.

A Comprehensive Review on Low-Temperature Combustion Technologies for Emission Reduction in Diesel Engines

2021 ◽  
Vol 18 (4) ◽  
Author(s):  
Amit Jhalani ◽  
Dilip Sharma ◽  
Pushpendra Kumar Sharma ◽  
Digambar Singh ◽  
Sumit Jhalani ◽  
...  
Keyword(s):  
Low Temperature ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Low Temperature Combustion ◽  
Compression Ignition ◽  
Lean Burn ◽  
Performance And Emissions ◽  
Temperature Combustion ◽  
Hc Emissions ◽  
Ci Engines

Diesel engines are lean burn engines; hence CO and HC emissions in the exhaust are less likely to occur in substantial amounts. The emissions of serious concern in compression ignition engines are particulate matter and nitrogen oxides because of elevated temperature conditions of combustion. Hence the researchers have strived continuously to lower down the temperature of combustion in order to bring down the emissions from CI engines. This has been tried through premixed charge compression ignition, homogeneous charge compression ignition (HCCI), gasoline compression ignition and reactivity controlled compression ignition (RCCI). In this study, an attempt has been made to critically review the literature on low-temperature combustion conditions using various conventional and alternative fuels. The problems and challenges augmented with the strategies have also been described. Water-in-diesel emulsion technology has been discussed in detail. Most of the authors agree over the positive outcomes of water-diesel emulsion for both performance and emissions simultaneously.

scholarly journals Potential Improvement in PM-NOX Trade-Off in a Compression Ignition Engine by n-Octanol Addition and Injection Pressure

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 310
Author(s):  
Qiwei Wang ◽  
Rong Huang ◽  
Jimin Ni ◽  
Qinqing Chen
Keyword(s):  
Oxygen Content ◽  
Alternative Fuels ◽  
Energy Content ◽  
Cetane Number ◽  
High Energy ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Promising Alternative ◽  
Trade Off ◽  
Ci Engines

n-Octanol, as an oxygenated fuel, is considered as one of the most promising alternative fuels, owing to advantages such as its low hygroscopic nature, high cetane number, and high energy content. However, the introduction of n-octanol leads to a higher viscosity and latent heat of evaporation (LHOE), affecting the combustion and emission performances of compression ignition (CI) engines. This study sheds light on the effect of injection pressures (IPs, ranging from 60 to 160 MPa) on the combustion and emission performances of a turbocharged CI engine, in conjunction with n-octanol/diesel blends. According to the proportion of oxygen content, the test fuels contain pure diesel (N0), N2.5 (2.5% oxygen content in the blending fuels), and N5 (5% oxygen content in the blending fuels). The results indicate that the blending fuels have little influence on the in-cylinder pressure, ignition delay (ID), and CA50, but they improve the brake thermal efficiency (BTE). In terms of emissions, with the use of blending fuels, the levels of carbon monoxide (CO), soot, and nitrogen oxides (NOX) decrease, whereas emissions of hydrocarbons (HC) slightly increase. With increasing IP, the ID, brake specific fuel consumption (BSFC), HC, CO, and soot decrease significantly, and the BTE and NOX increase. In addition, the combination of n-octanol and IP improves the trade-off between NOX and soot and reduces the CO emissions.

Effects of triglyceride gasoline blends on combustion and emissions in a common rail direct injection diesel engine

2017 ◽  
Vol 19 (10) ◽  
pp. 1068-1078 ◽  
Author(s):  
Arunachalam Lakshminarayanan ◽  
Daniel B Olsen ◽  
Perry E Cabot
Keyword(s):  
Fuel Consumption ◽  
Vegetable Oils ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Direct Injection ◽  
Pollutant Emissions ◽  
Compression Ignition Engine ◽  
Unleaded Gasoline ◽  
Particulate Matter Emissions ◽  
Volume Measurements

This study presents the combustion and emission results using a blend of unrefined triglycerides (straight vegetable oils) and regular unleaded gasoline in a compression ignition engine typically used in farming machinery. Most farm equipment is powered by diesel engines. A sizable cost of producing a crop on a farm can be attributed to fuel—diesel in such cases. Farmers and researchers have been interested in the use of alternative fuels, especially triglycerides, which could potentially bring down the fuel cost portion of the farm input costs. One of the major drawbacks of using unrefined triglycerides is poor cold flow properties due to high density and viscosity. To overcome this, the triglycerides can be blended with gasoline to lower the density and viscosity. This blend has been used in existing diesel engines without the need for any modification to the engine or its control system. The experiments were conducted on a 4.5-L Tier 3 engine. The fuel used was a blend of unrefined canola triglyceride and regular unleaded gasoline (10% by volume). Measurements include mass fraction burned combustion pressure, fuel consumption and pollutant emissions. The fuel consumption of TGB10 was lower than most straight vegetable oils found in the literature, but higher than diesel. The peak pressure of TGB10 was slightly higher than diesel and occurred earlier than diesel. The brake-specific NOx was lower than diesel at lower and no load points. Particulate matter emissions of TGB10 were higher than diesel at rated speed. Total hydrocarbon emissions were generally higher than diesel. CO emissions were lower than diesel except at low or no load points where they were significantly higher.

scholarly journals Combustion Behaviors of a Compression Ignition Engine Fuelled with Mosambipeel Blends Pyro oil using Ethyl Ether as an Additive

2019 ◽  
Vol 8 (4) ◽  
pp. 6045-6049
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
High Efficiency ◽  
Compression Ignition ◽  
Pyrolysis Oil ◽  
Pyrolysis Process ◽  
Negative Effects ◽  
Compression Ignition Engine

Diesel engines are principally employed in industries, transportation and agricultural fields because of their high efficiency and reliability. However, too much of smoke and nitric oxide emissions is one of the drawbacks. To regulate pollution and other negative effects of diesel engines, alternative fuels have come into existence. Ethanol produced from sugarcane in the biomass process is a recent example of it, due to its high octane number. But using raw ethanol is not a quality fuel for a solid ignition engine. It can be converted through a dehydration process to produce Diethyl Ether (DEE), which is an excellent compression-ignition fuel with a higher energy level than ethanol. DEE having a starting problem can’t be used directly in large amounts in diesel engines, but using it in small amounts is an advantage. This paper highlights the performance of blended pyrolysis oil with diesel fuel in the combination of DEE used in a mono cylinder four-stroke diesel engine. The pyrolysis process was used to extract the pyro oil from the Mosambi peel biomass. The oil has been extracted from Mosambi peel at the reaction temperature of 750˚C, in other words, the fast pyrolysis process. The study was conducted on composition of MDEE5 (5%MPPO+5%DEE+90D),MDEE10(10%MPPO+5%DEE+85% D) and MDEE15 (15% MPPO + 5%DEE + 80% D). Characteristics of the above combinations, MDEE5, MDEE10, and MDEE15 were analyzed and the properties like viscosity, density, flashpoint, fire point FTIR analysis of oils are also recorded. The blending of pyrolysis oil and DEE are mixed with diesel fuel with its volume. All the blended fuels were tested at 1500 rpm single-cylinder diesel engine. The maximum power output of brake thermal efficiency was recorded as 31.5% with MDEE5 as it was 30.0% with BD. The emission of smoke and NOx were considerably reduced

scholarly journals Performance and emission characteristics of diesel engine using ether additives: A review

2021 ◽  
Vol 11 (1) ◽  
pp. 255-274
Author(s):  
Quoc Bao Doan ◽  
Xuan Phuong Nguyen ◽  
Van Viet Pham ◽  
Thi Minh Hao Dong ◽  
Minh Tuan Pham ◽  
...  
Keyword(s):  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Engine Performance ◽  
Pollutant Emissions ◽  
Biodiesel Fuel ◽  
Emission Characteristics ◽  
Organic Additives ◽  
Combustion Dynamics ◽  
Performance And Emission ◽  
Ci Engines

Pressure on alternative fuels and strict environmental regulations are driving a strategic shift in the efficient use of renewable biofuels. One of the promising biofuel candidates recently interested by scholars is a biological or organic additive that is added into diesel or biodiesel fuel to improve engine performance and reduce pollutant emissions. With efforts to improve efficiency and combustion quality in cylinders, combustion characteristics, flame structure and emission formation mechanism in compression ignition (CI) engines using blended fuel with organic additives have been studied on the effect of additive properties on the combustion behaviour. In this review, the physicochemical properties of typical organic additives such as ethers compounds and their effects on engine performance and emission characteristics have been discussed and evaluated based on conclusions of recent relevant literature. The results of the analysis revealed the prospect of using ether additives to improve combustion in cylinders and reduce pollutant emissions from CI engines. Obviously, the presence of higher oxygen content, lower viscosity and density, and higher cetane number resulted in a positive change in the combustion dynamics as well as a chain of mechanisms for the formation of pollutant precursors in the cylinder. Therefore, ether additives have a significant contribution to the sustainable energy strategy of the transportation sector in the next period when internal combustion engines still dominate in the competition for energy system choices equipped on vehicles.

Binary Biodiesel Blend Endurance Characteristics in a Compression Ignition Engine

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Paramvir Singh ◽  
S. R. Chauhan ◽  
Varun Goel ◽  
Ashwani K. Gupta
Keyword(s):  
Diesel Fuel ◽  
Biodiesel Fuel ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Engine Operation ◽  
Endurance Tests ◽  
Ci Engines

The results obtained on wear assessment from a compression ignition (CI) engine fueled with a blend of 70% amla seed biodiesel (AB) and 30% eucalyptus oil (EU) on volume basis (called AB70EU30). The results showed stable engine operation and good operability of the engine-fuel system with the binary biodiesel fuel blend. The feasibility of this blend over a long-term endurance tests was explored. The specific assessment examination included the fate of cylinder head, pump plunger, injector nozzle, and piston crown, which affects the engine performance and engine life. The experimental results revealed better tribological performance characteristics with the binary fuel blend as compared to contemporary diesel fuel. No specific problem was encountered during the long-term endurance tests with the binary fuel blend using the modified engine parameters. The results show that the binary fuel mixture offers good potential for use as diesel fuel in CI engines while maintaining good performance and endurance.

Pollutant emissions investigation in a compression ignition engine during warm-up time

2017 ◽  
Author(s):  
Naiara Lima Costa ◽  
Ramon Eduardo Pereira Silva ◽  
Letícia Schneider Ferrari
Keyword(s):  
Pollutant Emissions ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Warm Up

Mapping the combustion modes of a dual-fuel compression ignition engine

2021 ◽  
pp. 146808742110183
Author(s):  
Jonathan Martin ◽  
André Boehman
Keyword(s):  
Direct Injection ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Combustion Modes ◽  
Si Engines ◽  
Dual Fuel Combustion ◽  
Soot Emissions ◽  
Ci Engines

Compression-ignition (CI) engines can produce higher thermal efficiency (TE) and thus lower carbon dioxide (CO2) emissions than spark-ignition (SI) engines. Unfortunately, the overall fuel economy of CI engine vehicles is limited by their emissions of nitrogen oxides (NOx) and soot, which must be mitigated with costly, resource- and energy-intensive aftertreatment. NOx and soot could also be mitigated by adding premixed gasoline to complement the conventional, non-premixed direct injection (DI) of diesel fuel in CI engines. Several such “dual-fuel” combustion modes have been introduced in recent years, but these modes are usually studied individually at discrete conditions. This paper introduces a mapping system for dual-fuel CI modes that links together several previously studied modes across a continuous two-dimensional diagram. This system includes the conventional diesel combustion (CDC) and conventional dual-fuel (CDF) modes; the well-explored advanced combustion modes of HCCI, RCCI, PCCI, and PPCI; and a previously discovered but relatively unexplored combustion mode that is herein titled “Piston-split Dual-Fuel Combustion” or PDFC. Tests show that dual-fuel CI engines can simultaneously increase TE and lower NOx and/or soot emissions at high loads through the use of Partial HCCI (PHCCI). At low loads, PHCCI is not possible, but either PDFC or RCCI can be used to further improve NOx and/or soot emissions, albeit at slightly lower TE. These results lead to a “partial dual-fuel” multi-mode strategy of PHCCI at high loads and CDC at low loads, linked together by PDFC. Drive cycle simulations show that this strategy, when tuned to balance NOx and soot reductions, can reduce engine-out CO2 emissions by about 1% while reducing NOx and soot by about 20% each with respect to CDC. This increases emissions of unburnt hydrocarbons (UHC), still in a treatable range (2.0 g/kWh) but five times as high as CDC, requiring changes in aftertreatment strategy.

scholarly journals Use of diesel and emulsified diesel in CI engine: A comparative analysis of engine characteristics

2021 ◽  
Vol 104 (2) ◽  
pp. 003685042110209
Author(s):  
Zain Ul Hassan ◽  
Muhammad Usman ◽  
Muhammad Asim ◽  
Ali Hussain Kazim ◽  
Muhammad Farooq ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Alternative Fuels ◽  
Fossil Fuels ◽  
Negative Impact ◽  
Water Injection ◽  
Load Range ◽  
Performance And Emission ◽  
Injection Methods ◽  
Ci Engine ◽  
Ci Engines

Despite a number of efforts to evaluate the utility of water-diesel emulsions (WED) in CI engine to improve its performance and reduce its emissions in search of alternative fuels to combat the higher prices and depleting resources of fossil fuels, no consistent results are available. Additionally, the noise emissions in the case of WED are not thoroughly discussed which motivated this research to analyze the performance and emission characteristics of WED. Brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC) were calculated at 1600 rpm within 15%–75% of the load range. Similarly, the contents of NOx, CO, and HC, and level of noise and smoke were measured varying the percentage of water from 2% to 10% gradually for all values of loads. BTE in the case of water emulsified diesel was decreased gradually as the percentage of water increased accompanied by a gradual increase in BSFC. Thus, WED10 showed a maximum 13.08% lower value of BTE while BSFC was increased by 32.28%. However, NOx emissions (21.8%) and smoke (48%) were also reduced significantly in the case of WED10 along with an increase in the emissions of HC and CO and noise. The comparative analysis showed that the emulsified diesel can significantly reduce the emission of NOx and smoke, but it has a negative impact on the performance characteristics and HC, CO, and noise emissions which can be mitigated by trying more fuels variations such as biodiesel and using different water injection methods to decrease dependency on fossil fuels and improve the environmental impacts of CI engines.

Experimental Investigation of a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Jinlong Liu ◽  
Hemanth Kumar Bommisetty ◽  
Cosmin Emil Dumitrescu
Keyword(s):  
Natural Gas ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Compression Ignition ◽  
Heavy Duty ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Cycle Variation ◽  
Spark Timing ◽  
Ci Engines

Heavy-duty compression-ignition (CI) engines converted to natural gas (NG) operation can reduce the dependence on petroleum-based fuels and curtail greenhouse gas emissions. Such an engine was converted to premixed NG spark-ignition (SI) operation through the addition of a gas injector in the intake manifold and of a spark plug in place of the diesel injector. Engine performance and combustion characteristics were investigated at several lean-burn operating conditions that changed fuel composition, spark timing, equivalence ratio, and engine speed. While the engine operation was stable, the reentrant bowl-in-piston (a characteristic of a CI engine) influenced the combustion event such as producing a significant late combustion, particularly for advanced spark timing. This was due to an important fraction of the fuel burning late in the squish region, which affected the end of combustion, the combustion duration, and the cycle-to-cycle variation. However, the lower cycle-to-cycle variation, stable combustion event, and the lack of knocking suggest a successful conversion of conventional diesel engines to NG SI operation using the approach described here.

Sign in / Sign up

Export Citation Format

Share Document