Analysis of Intercooler in PEM Fuel Cell Systems

Volume 3 ◽  
2004 ◽  
Author(s):  
Takamasa Ito ◽  
Jinliang Yuan ◽  
Bengt Sunde´n
Keyword(s):  
Heat Exchanger ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Cooling System ◽  
Ambient Air ◽  
Proton Exchange ◽  
High Mass ◽  
Air Cooling ◽  
Cell Systems ◽  
Cold Stream

Heat exchangers are used in proton exchange membrane fuel cell systems (PEMFCs) for stack cooling, intercooling, water condensation and fuel reforming. Especially, the heat exchanger for the intercooling before the humidifier is investigated in this paper. It is found that, at high pressure or high mass flow rate, the need to cool the air (oxidant) is large. The heat exchanger uses coolant water from the stack cooling system or ambient air as the cold stream. With water-cooling, the volume of the heat exchanger will be small. However, difficulties exist because the small available temperature difference. Air-cooling can be used over a wide operating range but the heat exchanger volume will be large.

Numerical investigations of assisted heating cold start strategies for proton exchange membrane fuel cell systems

Energy ◽  
2021 ◽  
Vol 222 ◽  
pp. 119910
Author(s):  
Zirong Yang ◽  
Kui Jiao ◽  
Kangcheng Wu ◽  
Weilong Shi ◽  
Shangfeng Jiang ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Cold Start ◽  
Proton Exchange ◽  
Cell Systems ◽  
Numerical Investigations ◽  
Exchange Membrane

Optimal design of thermostat for proton exchange membrane fuel cell cooling system

2021 ◽  
Vol 248 ◽  
pp. 114800
Author(s):  
Quangang Xia ◽  
Tong Zhang ◽  
Yuan Gao ◽  
XiChen Ye ◽  
Ciming Guan
Keyword(s):  
Fuel Cell ◽  
Optimal Design ◽  
Proton Exchange Membrane ◽  
Cooling System ◽  
Proton Exchange ◽  
Exchange Membrane

Design Methodology of a Proton Exchange Membrane Modular Fuel Cell of 100 W Power Output

2011 ◽  
Vol 8 (6) ◽  
Author(s):  
Munzer S. Y. Ebaid ◽  
Mohamad Y. Mustafa
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Cooling System ◽  
Research Work ◽  
Proton Exchange ◽  
Heat Output ◽  
Scale Production ◽  
Manufacturing Alternatives ◽  
The Cost ◽  
Exchange Membrane

The design of the fuel cell plays a major role in determining their cost. It is not only the cost of materials that increases the cost of the fuel cell, but also the manufacturing techniques and the need for skilled technicians for assembling and testing the fuel cell. The work presented in this paper is part of a research work aims to design and manufacture a proton exchange membrane (PEM) modular fuel cell of 100 W output at low cost using conventional materials and production techniques, then testing the fuel cell to validate its performance. This paper will be dealing only with the design of a modular fuel cell that can be mass produced and used to set up a larger fuel cell stack for stationary applications (6 kW) which is capable of powering a medium sized household. The design for 100 W fuel cell module will include the calculations for the main dimensions of the fuel cell components, mass flow rate of reactants, water production, heat output, heat transfer and the cooling system. This work is intended to facilitate material and process selection prior to manufacturing alternatives prior to capital investment for wide-scale production. The authors believe that the paper would lead to a stimulating discussion.

Residential Experience with Proton Exchange Membrane Fuel Cell Systems for Combined Heat and Power

2005 ◽  
Vol 2 (4) ◽  
pp. 263-267 ◽  
Author(s):  
Darrell D. Massie ◽  
Daisie D. Boettner ◽  
Cheryl A. Massie
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Heat Recovery ◽  
Proton Exchange Membrane ◽  
Waste Heat ◽  
Cell System ◽  
Proton Exchange ◽  
Fuel Cell System ◽  
Cell Systems ◽  
Exchange Membrane

As part of a one-year Department of Defense demonstration project, proton exchange membrane fuel cell systems have been installed at three residences to provide electrical power and waste heat for domestic hot water and space heating. The 5kW capacity fuel cells operate on reformed natural gas. These systems operate at preset levels providing power to the residence and to the utility grid. During grid outages, the residential power source is disconnected from the grid and the fuel cell system operates in standby mode to provide power to critical loads in the residence. This paper describes lessons learned from installation and operation of these fuel cell systems in existing residences. Issues associated with installation of a fuel cell system for combined heat and power focus primarily on fuel cell siting, plumbing external to the fuel cell unit required to support heat recovery, and line connections between the fuel cell unit and the home interior for natural gas, water, electricity, and communications. Operational considerations of the fuel cell system are linked to heat recovery system design and conditions required for adequate flow of natural gas, air, water, and system communications. Based on actual experience with these systems in a residential setting, proper system design, component installation, and sustainment of required flows are essential for the fuel cell system to provide reliable power and waste heat.

Sign in / Sign up

Export Citation Format

Share Document