Investigation of Damping Potential of Strip Damper on a Real Turbine Blade

2016 ◽  
Author(s):  
M. Afzal ◽  
I. Lopez Arteaga ◽  
L. Kari ◽  
V. Kharyton
Keyword(s):  
Boundary Conditions ◽  
Dynamic Properties ◽  
Equations Of Motion ◽  
Iterative Solution ◽  
Element Model ◽  
Forced Response ◽  
Contact Forces ◽  
Response Analysis ◽  
Bladed Disk ◽  
Different Types

This paper investigates the damping potential of strip dampers on a real turbine bladed disk. A 3D numerical friction contact model is used to compute the contact forces by means of the Alternate Frequency Time domain method. The Jacobian matrix required during the iterative solution is computed in parallel with the contact forces, by a quasi-analytical method. A finite element model of the strip dampers, that allows for an accurate description of their dynamic properties, is included in the steady-state forced response analysis of the bladed disk. Cyclic symmetry boundary conditions and the multiharmonic balance method are applied in the formulation of the equations of motion in the frequency domain. The nonlinear forced response analysis is performed with two different types of boundary conditions on the strip: (a) free-free and (b) elastic, and their influence is analyzed. The effect of the strip mass, thickness and the excitation levels on the forced response curve is investigated in detail.

High Fidelity Transient Forced Response Analysis of Mistuned Bladed Disks Under Complex Excitation and Variable Rotation Speeds

2020 ◽  
Author(s):  
Jing Tong ◽  
Chaoping Zang ◽  
Evgeny Petrov
Keyword(s):  
Large Scale ◽  
Rotation Speed ◽  
Dynamic Properties ◽  
Spectral Composition ◽  
Forced Response ◽  
Mode Shapes ◽  
Response Analysis ◽  
Bladed Disks ◽  
Bladed Disk ◽  
Amplitude Amplification

Abstract An effective method is developed for the efficient calculation of the transient vibration response for mistuned bladed disks under complex excitation and varying rotation speeds. The method uses the large-scale finite element modelling of the bladed disks allowing the accurate description of the dynamic properties of the mistuned bladed disks. The realistic distributions of the excitation forces are considered, which resulted in the multiharmonic excitation loads. The transient response calculation is based on the analytically derived expressions for the transient forced response and the effective method used for the model reduction. The effects of the varying rotation speed on the natural frequencies and mode shapes of the mistuned bladed disk and its effects on the amplitude and the spectral composition of the loading are allowed for. The different functions of the rotation speed variation can be analyzed. Numerical studies of the transient forced response and the amplitude amplification in mistuned bladed disks are performed when the resonance regimes are passed during gas-turbine engine acceleration or deceleration. The effects of different types of excitation force and mistuning on transient amplitude amplification are illustrated by a large number of the computational results and comparative analysis. These results and analysis of transient forced response are shown on an example of a realistic mistuned bladed disk.

Non-Linear Forced Response Analysis of Mistuned Bladed Disk Assemblies

2010 ◽  
Author(s):  
M. Ersin Yu¨mer ◽  
Ender Cig˘erog˘lu ◽  
H. Nevzat O¨zgu¨ven
Keyword(s):  
Degrees Of Freedom ◽  
Linear Equations ◽  
Harmonic Balance Method ◽  
Forced Response ◽  
Contact Forces ◽  
Response Analysis ◽  
Disk Model ◽  
Bladed Disk ◽  
Non Linear ◽  
Linear Elements

Forced response analysis of bladed disk assemblies plays a crucial role in rotor blade design, and therefore has been investigated by researchers extensively. However, due to lack of computation power, several studies in the literature utilize either linear mistuned models which are short of capturing nonlinear effects, or non-linear tuned models which do not catch the effects of mistuning. Studying the combined effect of the two, namely non-linearity and mistuning, is relatively recent and generally conducted with methods whose convergence and accuracy depend highly on the number of degrees of freedom related with the non-linear elements. In this paper, a new approach is proposed to predict forced response of frictionally damped mistuned bladed disk assemblies in modal domain. A friction element, which enables normal load variation and separation of the contact interface, is utilized to determine the non-linear contact forces in three-dimensional space, and harmonic balance method is used to obtain a relationship between the non-linear contact forces and the relative motion. As mistuning phenomenon destroys the cyclic symmetry, modeling the whole assembly rather than a sector of it is necessary, which increases the number of non-linear elements required considerably. In the proposed approach, the analysis is carried out in modal domain where the differential equations of motions are converted to a set of non-linear algebraic equations using harmonic balance method and modal superposition technique. Thus, the number of non-linear equations to be solved is proportional to the number of modes retained, rather than the number of degrees of freedom related with the nonlinear elements. Therefore, the proposed approach can be applied to realistic bladed disk models without increasing the number of non-linear equations. Moreover, to accomplish this it is not required to use a reduced order model in the method suggested. Two case studies are presented to illustrate the implementation of the method: a lumped parameter bladed disk model and an academic bladed disk model with shrouds.

scholarly journals Forced Response Analysis of High-Mode Vibrations for Mistuned Bladed Disks With Effective Reduced-Order Models

2016 ◽  
Vol 138 (11) ◽  
Author(s):  
Yongliang Duan ◽  
Chaoping Zang ◽  
E. P. Petrov
Keyword(s):  
Dynamic Properties ◽  
Forced Response ◽  
High Mode ◽  
Mode Shapes ◽  
Response Analysis ◽  
Fe Model ◽  
Computationally Efficient ◽  
Bladed Disks ◽  
Accurate Analysis ◽  
Bladed Disk

This paper is focused on the analysis of effects of mistuning on the forced response of gas turbine engine bladed disks vibrating in the frequency ranges corresponding to higher modes. For high modes considered here, the blade aerofoils are deformed during vibrations and the blade mode shapes differ significantly from beam mode shapes. A model reduction technique is developed for the computationally efficient and accurate analysis of forced response for bladed disks vibrating in high-frequency ranges. The high-fidelity finite element (FE) model of a tuned bladed disk sector is used to provide primary information about dynamic properties of a bladed disk, and the blade mistuning is modeled by specially defined mistuning matrices. The forced response displacement and stress amplitude levels are studied. The effects of different types of mistuning are examined, and the existence of high amplifications of mistuned forced response levels is shown for high-mode vibrations: in some cases, the resonance peak response of a tuned structure can be lower than out-of-resonance amplitudes of its mistuned counterpart.

A Method for Use of Cyclic Symmetry Properties in Analysis of Nonlinear Multiharmonic Vibrations of Bladed Disks

2004 ◽  
Vol 126 (1) ◽  
pp. 175-183 ◽  
Author(s):  
E. P. Petrov
Keyword(s):  
High Efficiency ◽  
Equations Of Motion ◽  
Linear Part ◽  
Forced Response ◽  
Mode Shapes ◽  
Solution Technique ◽  
Disk Model ◽  
Sector Model ◽  
Bladed Disk ◽  
Symmetry Properties

An effective method for analysis of periodic forced response of nonlinear cyclically symmetric structures has been developed. The method allows multiharmonic forced response to be calculated for a whole bladed disk using a periodic sector model without any loss of accuracy in calculations and modeling. A rigorous proof of the validity of the reduction of the whole nonlinear structure to a sector is provided. Types of bladed disk forcing for which the method may be applied are formulated. A multiharmonic formulation and a solution technique for equations of motion have been derived for two cases of description for a linear part of the bladed disk model: (i) using sector finite element matrices and (ii) using sector mode shapes and frequencies. Calculations validating the developed method and a numerical investigation of a realistic high-pressure turbine bladed disk with shrouds have demonstrated the high efficiency of the method.

An Efficient Response Analysis Method for a Non-Linear/Parameter Changing System Using Sub-Structure Modes

1993 ◽  
Vol 207 (1) ◽  
pp. 41-52
Author(s):  
H K Kim ◽  
Y-S Park
Keyword(s):  
Equations Of Motion ◽  
Forced Response ◽  
Suggested Method ◽  
Response Analysis ◽  
Synthesis Methods ◽  
Lumped Mass ◽  
State Equations ◽  
Mass Model ◽  
Non Linear ◽  
Forced Responses

An efficient state-space method is presented to determine time domain forced responses of a structure using the Lagrange multiplier based sub-structure technique. Compared with the conventional mode synthesis methods, the suggested method can be particularly effective for the forced response analysis of a structure subjected to parameter changes with time, such as a missile launch system, and/or having localized non-linearities, because this method does not need to construct the governing equations of the combined whole structure. Both the loaded interface free-free modes and free interface modes can be employed as the modal bases of each sub-structure. The sub-structure equations of motion are derived using Lagrange multipliers and recurrence discrete-time state equations based upon the concept of the state transition matrix are formulated for transient response analysis. The suggested method is tested with two example structures, a simple lumped mass model with a non-linear joint and an abruptly parameter changing structure. The test results show that the suggested method is very accurate and efficient in calculating forced responses and in comparing it with the direct numerical integration method.

Explicit Finite Element Models of Friction Dampers in Forced Response Analysis of Bladed Discs

2007 ◽  
Author(s):  
E. P. Petrov
Keyword(s):  
Finite Element ◽  
Large Scale ◽  
Dynamic Properties ◽  
Forced Response ◽  
Response Analysis ◽  
Contact Interactions ◽  
Contact Interface ◽  
Explicit Finite Element ◽  
Friction Dampers ◽  
Time Dynamic

A generic method for analysis of nonlinear forced response for bladed discs with friction dampers of different design has been developed. The method uses explicit finite element modelling of dampers, which allows accurate description of flexibility and, for the first time, dynamic properties of dampers of different design in multiharmonic analysis of bladed discs. Large-scale finite element damper and bladed disc models containing 104–106 DOFs can be used. These models, together with detailed description of contact interactions over contact interface areas, allow for any level of refinement required for modelling of elastic damper bodies and for modelling of friction contact interactions. Numerical studies of realistic bladed discs have been performed with three different types of underplatform dampers: (i) a ‘cottage-roof’ (called also ‘wedge’) damper; (ii) seal wire damper; and (iii) a strip damper. Effects of contact interface parameters and excitation levels on damping properties of the dampers and forced response are extensively explored.

Parametric Dynamics of Mistuned Bladed Disk

2014 ◽  
Author(s):  
Peiyi Wang ◽  
Lin Li
Keyword(s):  
Coupling Strength ◽  
Amplification Factor ◽  
Dynamic Properties ◽  
Forced Response ◽  
Design Parameters ◽  
Classical Dynamic ◽  
Mode Localization ◽  
Bladed Disk ◽  
Saddle Surface ◽  
Wear And Tear

The mistuning of bladed disk comes from manufacturing tolerances and in-service wear and tear. Consequently the cyclic symmetry has been destroyed by mistuning, even small mistuning levels could result in drastic changes in the dynamics of bladed disks. Specifically, mistuning can cause mode localization and an increase of the maximum forced response. It has been known that frequency veering, modal localization and magnification of response are three most classical dynamic properties of bladed disk. However few researches has focused on the relationships between dynamic characters and design parameters, because the proper variation ranges of the design parameters are difficult to be determined. The aim of this paper is to investigate the relationship between designed parameters and dynamic properties of mistuned bladed disk. Based on a lumped parametric model of bladed disk and utilizing parameterized eigenvalue solution, a reasonable range of designed parameter corresponding to specific nodal diameter index was provided. The numerical results showed that the curves of the gap of frequency veering versus coupling strength or blade stiffness have bowel-style. It was also found that there exists a quasi-saddle-surface while the vibration amplification factor varies with coupling strength and mistuning strength. The quasi-saddle-surface reveals that the existence of threshold of vibration amplification factor depends on the value of coupling strength. The result means that a proper choice of combination of coupling strength and mistuning strength could lead to a suppression of mistuned vibration amplification.

Global Structure Strength Analysis of SWATH Based on Direct Calculate Method

2014 ◽  
Vol 633-634 ◽  
pp. 1002-1006
Author(s):  
Chun Bo Zhen ◽  
Liang Feng ◽  
Guo Chun Lu ◽  
Yuan Hang Hou
Keyword(s):  
Stress Concentration ◽  
Boundary Conditions ◽  
Element Model ◽  
Global Structure ◽  
Strength Analysis ◽  
Response Analysis ◽  
Structure Response ◽  
Result Show ◽  
Design Loads ◽  
Structure Strength

The stress concentration of SWATH’s cross-deck structure is serious and the problem of its structure strength appears particularly important. In this paper, A 3-D global element model of SWATH was built, the design Loads, load cases and boundary conditions were studied. on the base of that, the structure response analysis was completed. The result show that the global ship’s stress is small in all load cases of head seas and oblique seas, and the bulkheads have serious stress concentration phenomenon in beam seas.The result can offer the reference for SWATH’s design and development.

Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces

2010 ◽  
Vol 132 (8) ◽  
Author(s):  
Christian Siewert ◽  
Lars Panning ◽  
Jörg Wallaschek ◽  
Christoph Richter
Keyword(s):  
Frequency Domain ◽  
Nonlinear Equations ◽  
Forced Response ◽  
Vibration Response ◽  
Contact Forces ◽  
Dynamic Loads ◽  
Response Analysis ◽  
Dynamic Stresses ◽  
Nonlinear Contact ◽  
Turbine Blading

In turbomachinery applications, the rotating turbine blades are subjected to high static and dynamic loads. The static loads are due to centrifugal stresses and thermal strains whereas the dynamic loads are caused by the fluctuating gas forces resulting in high vibration amplitudes, which can lead to high cycle fatigue failures. Hence, one of the main tasks in the design of turbomachinery blading is the reduction in the blade vibration amplitudes to avoid high dynamic stresses. Thus, coupling devices like underplatform dampers and tip shrouds are applied to the blading to reduce the vibration amplitudes and, therefore, the dynamic stresses by introducing nonlinear contact forces to the system. In order to predict the resulting vibration amplitudes, a reduced order model of a shrouded turbine blading is presented including a contact model to determine the nonlinear contact forces. To compute the forced response, the resulting nonlinear equations of motion are solved in the frequency domain using the multiharmonic balance method because of the high computational efficiency of this approach. The transformation from the time domain into the frequency domain is done by applying Galerkin’s method in combination with a multiharmonic approximation function for the unknown vibration response. This results in an algebraic system of nonlinear equations in the frequency domain, which has to be solved iteratively in order to compute the vibration response. The presented methodology is applied to the calculation of the forced response of a nonlinear coupled turbine blading in the frequency domain.

Transient Forced Response Analysis of Mistuned Steam Turbine Blades During Startup and Coastdown

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Christian Siewert ◽  
Heinrich Stüer
Keyword(s):  
Mechanical Model ◽  
Turbine Blades ◽  
Forced Vibrations ◽  
Forced Response ◽  
The Self ◽  
Response Analysis ◽  
Computationally Efficient ◽  
Bladed Disk ◽  
Steam Turbine Blades ◽  
Number Of Publications

It is well known that the vibrational behavior of a mistuned bladed disk differs strongly from that of a tuned bladed disk. A large number of publications dealing with the dynamics of mistuned bladed disks are available in the literature. The vibrational phenomena analyzed in these publications are either forced vibrations or self-excited flutter vibrations. Nearly, all published literature on the forced vibrations of mistuned blades disks considers harmonic, i.e., steady-state, vibrations, whereas the self-excited flutter vibrations are analyzed by the evaluation of the margin against instabilities by means of a modal, or rather than eigenvalue, analysis. The transient forced response of mistuned bladed disk is not analyzed in detail so far. In this paper, a computationally efficient mechanical model of a mistuned bladed disk to compute the transient forced response is presented. This model is based on the well-known fundamental model of mistuning (FMM). With this model, the statistics of the transient forced response of a mistuned bladed disk is analyzed and compared to the results of harmonic forced response analysis.

Sign in / Sign up

Export Citation Format

Share Document