Aerodynamic Optimisation of High Pressure Turbines for Lean-Burn Combustion System

2012 ◽  
Author(s):  
Shahrokh Shahpar ◽  
Stefano Caloni
Keyword(s):  
High Pressure ◽  
Swirling Flow ◽  
High Fidelity ◽  
Flame Stability ◽  
The Novel ◽  
Turbine Stage ◽  
Lean Burn ◽  
Flow Swirl ◽  
Surface Method ◽  
Practical Design

Modern lean-burn combustors make use of high flow swirl to maintain flame stability. The swirling flow can persist downstream of the turbine first vane, changing the loading on the rotor, leading to a reduction in efficiency. This paper presents the results of an automatic optimisation study carried out to mitigate the effect of high swirling flow on a high pressure turbine stage. A high-fidelity CFD-based design optimisation using a multi-point approximation (response surface) method is carried-out to produce a new vane and a new rotor configuration with a significantly improved aerodynamic performance. It is demonstrated that the novel optimisation methodology can cope well with a number of near equality constraints needed for a practical design.

Aerodynamic Optimization of High-Pressure Turbines for Lean-Burn Combustion System

2013 ◽  
Vol 135 (5) ◽  
Author(s):  
Shahrokh Shahpar ◽  
Stefano Caloni
Keyword(s):  
High Pressure ◽  
Swirling Flow ◽  
The Novel ◽  
Aerodynamic Optimization ◽  
Lean Burn ◽  
Flow Swirl ◽  
Optimization Study ◽  
Computational Fluid Dynamics Cfd ◽  
Multipoint Approximation ◽  
Optimization Methodology

Modern lean-burn combustors make use of high flow swirl to maintain flame stability. The swirling flow can persist downstream of the turbine first vane, changing the loading on the rotor, leading to a reduction in efficiency. This paper presents the results of an automatic optimization study carried out to mitigate the effect of high swirling flow on a high pressure turbine stage. A high-fidelity computational fluid dynamics (CFD)-based design optimization using a multipoint approximation (response surface) method is carried out to produce a new vane and a new rotor configuration with a significantly improved aerodynamic performance. It is demonstrated that the novel optimization methodology can cope well with a number of near equality constraints needed for a practical design.

Rotor Blade Heat Transfer of High Pressure Turbine Stage Under Inlet Hot-Streak and Swirl

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
A. Rahim ◽  
L. He
Keyword(s):  
Heat Transfer ◽  
High Pressure ◽  
Heat Load ◽  
Design Space Exploration ◽  
Role Reversal ◽  
Dominant Factor ◽  
Inlet Temperature ◽  
Turbine Stage ◽  
Lean Burn ◽  
Hot Streak

A key consideration in high pressure (HP) turbine designs is the heat load experienced by rotor blades. Impact of turbine inlet nonuniformity of combined temperature and velocity traverses, typical for a lean-burn combustor exit, has rarely been studied. For general turbine aerothermal designs, it is also of interest to understand how the behavior of lean-burn combustor traverses (with both hot-streak and swirl) might contrast with those for a rich-burn combustor (largely hot-streak only). In the present work, a computational study has been carried out on the aerothermal performance of a HP turbine stage under nonuniform temperature and velocity inlet profiles. The analyses are primarily conducted for two combined hot-streak and swirl inlets, with opposite swirl directions. In addition, comparisons are made against a hot-streak only case and a uniform inlet. The effects of three nozzle guide vane (NGV) shape configurations are investigated: straight, compound lean (CL) and reverse CL (RCL). The present results reveal a qualitative change in the roles played by heat transfer coefficient (HTC) and fluid driving (“adiabatic wall”) temperature, Taw. It has been shown that the blade heat load for a uniform inlet is dominated by HTC, whilst a hot-streak only case is largely influenced by Taw. However, in contrast to the hot-streak only case, a combined hot-streak and swirl case shows a role reversal with the HTC being a dominant factor. Additionally, it is seen that the swirling flow redistributes radially the hot fluid within the NGV passage considerably, leading to a much ‘flatter’ rotor inlet temperature profile compared to its hot-streak only counterpart. Furthermore, the rotor heat transfer characteristics for the combined traverses are shown to be strongly dependent on the NGV shaping and the inlet swirl direction, indicating a potential for further design space exploration. The present findings underline the need to clearly define relevant combustor exit temperature and velocity profiles when designing and optimizing NGVs for HP turbine aerothermal performance.

Adiabatic Effectiveness on High Pressure Turbine Nozzle Guide Vanes Under Realistic Swirling Conditions

2018 ◽  
Author(s):  
T. Bacci ◽  
R. Becchi ◽  
A. Picchi ◽  
B. Facchini
Keyword(s):  
High Pressure ◽  
Film Cooling ◽  
Swirling Flow ◽  
Cooling System ◽  
Density Ratio ◽  
Leading Edge ◽  
Suction Side ◽  
Flame Stabilization ◽  
Lean Burn ◽  
Relevant Effect

In modern lean burn aero-engine combustors, highly swirling flow structures are adopted to control the fuel-air mixing and to provide the correct flame stabilization mechanisms. Aggressive swirl fields and high turbulence intensities are hence expected in the combustor-turbine interface. Moreover, to maximize the engine cycle efficiency, an accurate design of the high pressure nozzle cooling system must be pursued: in a film cooled nozzle the air taken from last compressor stages is ejected through discrete holes drilled on vane surfaces to provide a cold layer between hot gases and turbine components. In this context, the interactions between the swirling combustor outflow and the vane film cooling flows play a major role in the definition of a well performing cooling scheme, demanding for experimental campaigns at representative flow conditions. An annular three-sector combustor simulator with fully cooled high pressure vanes has been designed and installed at THT Lab of University of Florence. The test rig is equipped with three axial swirlers, effusion cooled liners and six film cooled high pressure vanes passages, for a vortex-to-vane count ratio of 1:2. The relative clocking position between swirlers and vanes has been chosen in order to have the leading edge of the central airfoil aligned with the central swirler. In this experimental work, adiabatic film effectiveness measurements have been carried out in the central sector vanes, in order to characterize the film-cooling performance under swirling inflow conditions. The Pressure Sensitive Paint technique, based on heat and mass transfer analogy, has been exploited to catch highly detailed 2D distributions. Carbon dioxide has been used as coolant in order to reach a coolant-to-mainstream density ratio of 1.5. Turbulence and five hole probe measurements at inlet/outlet of the cascade have been carried out as well, in order to highlight the characteristics of the flow field passing through the cascade and to provide precise boundary conditions. Results have shown a relevant effect of the swirling mainflow on the film cooling behaviour. Differences have been found between the central airfoil and the adjacent ones, both in terms of leading edge stagnation point position and of pressure and suction side film coverage characteristics.

Analysis of Radial Migration of Hot-Streak in Swirling Flow Through High-Pressure Turbine Stage

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
B. Khanal ◽  
L. He ◽  
J. Northall ◽  
P. Adami
Keyword(s):  
Heat Transfer ◽  
High Pressure ◽  
Swirling Flow ◽  
Guide Vane ◽  
Lean Burn ◽  
Considerable Impact ◽  
Computational Fluid Dynamics Cfd ◽  
Nozzle Guide ◽  
Hot Streak ◽  
Computational Analyses

The high pressure (HP) turbine is subject to inlet flow nonuniformities resulting from the combustor. A lean-burn combustor tends to combine temperature variations with strong swirl and, although considerable research efforts have been made to study the effects of a circumferential temperature nonuniformity (hot-streak), there is relatively little known about the interaction between the two. This paper presents a numerical investigation of the transonic test HP stage MT1 behavior under the combined influence of the swirl and hot-streak. The in house Rolls-Royce HYDRA numerical computational fluid dynamics (CFD) suite is used for all the simulations of the present study. Baseline configurations with either hot-streak or swirl at the stage inlet are analyzed to assess the methodology and to identify reference performance parameters through comparisons with the experimental data. Extensive computational analyses are then carried out for the cases with hot-streak and swirl combined, including both the effects of the combustor-nozzle guide vane (NGV) clocking and the direction of the swirl. The present results for the combined hot-streak and swirl cases reveal distinctive radial migrations of hot fluid in the NGV and rotor passages with considerable impact on the aerothermal performance. It is illustrated that the blade heat transfer characteristics and their dependence on the clocking position can be strongly affected by the swirl direction. A further computational examination is carried out on the validity of a superposition of the influences of swirl and hot-streak. It shows that the blade heat transfer in a combined swirl and hot-streak case cannot be predicted by the superposition of each in isolation.

Adiabatic Effectiveness on High-Pressure Turbine Nozzle Guide Vanes Under Realistic Swirling Conditions

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Tommaso Bacci ◽  
Riccardo Becchi ◽  
Alessio Picchi ◽  
Bruno Facchini
Keyword(s):  
High Pressure ◽  
Film Cooling ◽  
Swirling Flow ◽  
Cooling System ◽  
Density Ratio ◽  
Leading Edge ◽  
Suction Side ◽  
Flame Stabilization ◽  
Lean Burn ◽  
Relevant Effect

In modern lean-burn aero-engine combustors, highly swirling flow structures are adopted to control the fuel-air mixing and to provide the correct flame stabilization mechanisms. Aggressive swirl fields and high turbulence intensities are hence expected in the combustor-turbine interface. Moreover, to maximize the engine cycle efficiency, an accurate design of the high-pressure nozzle cooling system must be pursued: in a film-cooled nozzle, the air taken from last compressor stages is ejected through discrete holes drilled on vane surfaces to provide a cold layer between hot gases and turbine components. In this context, the interactions between the swirling combustor outflow and the vane film cooling flows play a major role in the definition of a well-performing cooling scheme, demanding for experimental campaigns at representative flow conditions. An annular three-sector combustor simulator with fully cooled high-pressure vanes has been designed and installed at THT Lab of University of Florence. The test rig is equipped with three axial swirlers, effusion-cooled liners, and six film-cooled high-pressure vanes passages, for a vortex-to-vane count ratio of 1:2. The relative clocking position between swirlers and vanes has been chosen in order to have the leading edge of the central airfoil aligned with the central swirler. In this experimental work, adiabatic film effectiveness measurements have been carried out in the central sector vanes, in order to characterize the film-cooling performance under swirling inflow conditions. The pressure-sensitive paint (PSP) technique, based on heat and mass transfer analogy, has been exploited to catch highly detailed 2D distributions. Carbon dioxide has been used as coolant in order to reach a coolant-to-mainstream density ratio of 1.5. Turbulence and five-hole probe measurements at inlet/outlet of the cascade have been carried out as well, in order to highlight the characteristics of the flow field passing through the cascade and to provide precise boundary conditions. Results have shown a relevant effect of the swirling mainflow on the film cooling behavior. Differences have been found between the central airfoil and the adjacent ones, both in terms of leading edge stagnation point position and of pressure and suction side film coverage characteristics.

Rotor Blade Heat Transfer Characteristics for High Pressure Turbine Stage Under Inlet Temperature and Velocity Traverses

2014 ◽  
Author(s):  
A. Rahim ◽  
L. He ◽  
E. Romero
Keyword(s):  
Heat Transfer ◽  
High Pressure ◽  
Heat Load ◽  
Inlet Temperature ◽  
Turbine Stage ◽  
Heat Transfer Characteristics ◽  
Lean Burn ◽  
Transfer Characteristics ◽  
Hot Streak ◽  
The Impact

One of the key considerations in high pressure (HP) turbine design is the heat load experienced by rotor blades. The impact of turbine inlet non-uniformities on the blades in the form of combined temperature and velocity traverses, typical for a lean burn combustor exit, has rarely been studied. For general HP turbine aerothermal designs, it is also of interest to understand how the behavior of a lean burn combustor traverses (hot streak and swirl) might contrast with those for rich burn combustion (largely hot streak only). In the present work, a computational study has been carried out on the aerothermal performance of a HP turbine stage under non-uniform temperature and velocity inlet profiles. The analyses are primarily conducted for two combined hot streak and swirl inlets, with opposite swirl directions. In addition, comparisons are made against a hot streak only case and a uniform inlet. The effects of three NGV shape configurations are investigated; namely, straight, compound lean (CL) and reverse compound lean (RCL). The present results show that there is a qualitative change in the roles played by heat transfer coefficient (HTC) and fluid driving (‘adiabatic wall’) temperature, Taw. It has been shown that the blade heat load distribution for a uniform inlet is dominated by HTC, whilst for a hot streak only case it is wholly influenced by Taw. However, in contrast to the hot streak only case, the case with a combined hot streak and swirl shows a role reversal with the HTC being dominant in determining the heat load. Additionally, it is seen that the swirling flow radially redistributes the hot fluid within the NGV passage considerably, leading to a much ‘flatter’ rotor inlet temperature profile compared to its hot streak only counterpart. Further, the rotor heat transfer characteristics for the cases with the combined traverses are shown to be strongly dependent on the NGV shaping and the inlet swirl direction, indicating the potential for future design space exploration. The present findings underline the need to clearly define relevant combustor exit temperature and velocity profiles when designing and optimizing NGVs for HP turbine aerothermal performance.

Analysis of Radial Migration of Hot-Streak in Swirling Flow Through HP Turbine Stage

2012 ◽  
Author(s):  
B. Khanal ◽  
L. He ◽  
J. Northall ◽  
P. Adami
Keyword(s):  
Heat Transfer ◽  
Swirling Flow ◽  
Turbine Stage ◽  
Heat Transfer Characteristics ◽  
Lean Burn ◽  
Considerable Research ◽  
Considerable Impact ◽  
Flow Through ◽  
Hot Streak ◽  
Computational Analyses

The high pressure (HP) turbine is subject to inlet flow non-uniformities resulting from the combustor. A lean-burn combustor tends to combine temperature variations with strong swirl and, although considerable research efforts have been made to study the effects of a circumferential temperature non-uniformity (hot-streak), there is relatively little known about the interaction between the two. This paper presents a numerical investigation of the transonic test HP stage MT1 behaviour under the combined influence of the swirl and hot-streak. The in house Rolls-Royce HYDRA numerical CFD suite is used for all the simulations of the present study. Baseline configurations with either hot-streak or swirl at the stage inlet are analyzed to assess the methodology and to identify reference performance parameters through comparisons with the experimental data. Extensive computational analyses are then carried out for the cases with hot-streak and swirl combined including both the effects of the combustor-NGV clocking and the direction of the swirl. The present results for the combined hot-streak and swirl cases reveal distinctive radial migrations of hot fluid in the NGV and rotor passages with considerable impact on the aerothermal performance. It is illustrated that the blade heat transfer characteristics and their dependence on the clocking position can be strongly affected by the swirl direction. A further computational examination is carried out on the validity of a superposition of the influences of swirl and hot-streak. It shows that the blade heat transfer in a combined swirl and hot-streak case cannot be predicted by the superposition of each in isolation.

scholarly journals Creep-Based Reliability Evaluation of Turbine Blade-Tip Clearance with Novel Neural Network Regression

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3552 ◽  
Author(s):  
Chun-Yi Zhang ◽  
Jing-Shan Wei ◽  
Ze Wang ◽  
Zhe-Shan Yuan ◽  
Cheng-Wei Fei ◽  
...  
Keyword(s):  
Neural Network ◽  
High Pressure ◽  
Reliability Analysis ◽  
Response Surface ◽  
Response Surface Method ◽  
Tip Clearance ◽  
Strong Nonlinearity ◽  
Surface Method ◽  
Blade Tip ◽  
Blade Tip Clearance

To reveal the effect of high-temperature creep on the blade-tip radial running clearance of aeroengine high-pressure turbines, a distributed collaborative generalized regression extremum neural network is proposed by absorbing the heuristic thoughts of distributed collaborative response surface method and the generalized extremum neural network, in order to improve the reliability analysis of blade-tip clearance with creep behavior in terms of modeling precision and simulation efficiency. In this method, the generalized extremum neural network was used to handle the transients by simplifying the response process as one extremum and to address the strong nonlinearity by means of its nonlinear mapping ability. The distributed collaborative response surface method was applied to handle multi-object multi-discipline analysis, by decomposing one “big” model with hyperparameters and high nonlinearity into a series of “small” sub-models with few parameters and low nonlinearity. Based on the developed method, the blade-tip clearance reliability analysis of an aeroengine high-pressure turbine was performed subject to the creep behaviors of structural materials, by considering the randomness of influencing parameters such as gas temperature, rotational speed, material parameters, convective heat transfer coefficient, and so forth. It was found that the reliability degree of the clearance is 0.9909 when the allowable value is 2.2 mm, and the creep deformation of the clearance presents a normal distribution with a mean of 1.9829 mm and a standard deviation of 0.07539 mm. Based on a comparison of the methods, it is demonstrated that the proposed method requires a computing time of 1.201 s and has a computational accuracy of 99.929% over 104 simulations, which are improvements of 70.5% and 1.23%, respectively, relative to the distributed collaborative response surface method. Meanwhile, the high efficiency and high precision of the presented approach become more obvious with the increasing simulations. The efforts of this study provide a promising approach to improve the dynamic reliability analysis of complex structures.

A dynamic probabilistic design method for blade-tip radial running clearance of aeroengine high-pressure turbine

2014 ◽  
Vol 229 (10) ◽  
pp. 1861-1872 ◽  
Author(s):  
Cheng-Wei Fei ◽  
Wen-Zhong Tang ◽  
Guang-chen Bai ◽  
Zhi-Ying Chen
Keyword(s):  
High Pressure ◽  
Response Surface ◽  
Response Surface Method ◽  
Probabilistic Analysis ◽  
High Reliability ◽  
Probabilistic Design ◽  
High Pressure Turbine ◽  
Analysis And Design ◽  
Surface Method ◽  
Blade Tip

Around the engineering background of the probabilistic design of high-pressure turbine (HPT) blade-tip radial running clearance (BTRRC) which conduces to the high-performance and high-reliability of aeroengine, a distributed collaborative extremum response surface method (DCERSM) was proposed for the dynamic probabilistic analysis of turbomachinery. On the basis of investigating extremum response surface method (ERSM), the mathematical model of DCERSM was established. The DCERSM was applied to the dynamic probabilistic analysis of BTRRC. The results show that the blade-tip radial static clearance δ = 1.82 mm is advisable synthetically considering the reliability and efficiency of gas turbine. As revealed by the comparison of three methods (DCERSM, ERSM, and Monte Carlo method), the DCERSM reshapes the possibility of the probabilistic analysis for turbomachinery and improves the computational efficiency while preserving computational accuracy. The DCERSM offers a useful insight for BTRRC dynamic probabilistic analysis and optimization. The present study enrichs mechanical reliability analysis and design theory.

Sign in / Sign up

Export Citation Format

Share Document