Main Annulus Gas Path Interactions: Turbine Stator Well Heat Transfer

2012 ◽  
Author(s):  
Jeffrey A. Dixon ◽  
Antonio Guijarro Valencia ◽  
Daniel Coren ◽  
Daniel Eastwood ◽  
Christopher Long
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Computer Modelling ◽  
Effective Means ◽  
Research Programme ◽  
Coupled Analysis ◽  
Test Rig ◽  
Cooling Flow ◽  
Turbine Stator ◽  
System Integrity

This paper summarises the work of a 5-year research programme into the heat transfer within cavities adjacent to the main annulus of a gas turbine. The work has been a collaboration between several gas turbine manufacturers, also involving a number of universities working together. The principal objective of the study has been to develop and validate computer modelling methods of the cooling flow distribution and heat transfer management, in the environs of multi-stage turbine disc rims and blade fixings, with a view to maintaining component and sub-system integrity, whilst achieving optimum engine performance and minimising emissions. A fully coupled analysis capability has been developed using combinations of commercially available and in-house computational fluid dynamics (CFD) and finite element (FE) thermo-mechanical modelling codes. The main objective of the methodology is to help decide on optimum cooling configurations for disc temperature, stress and life considerations. The new capability also gives us an effective means of validating the method by direct use of disc temperature measurements, where otherwise, additional and difficult to obtain parameters, such as reliable heat flux measurements, would be considered necessary for validation of the use of CFD for convective heat transfer. A two-stage turbine test rig has been developed and improved to provide good quality thermal boundary condition data with which to validate the analysis methods. A cooling flow optimisation study has also been performed to support a re-design of the turbine stator well cavity, to maximise the effectiveness of cooling air supplied to the disc rim region. The benefits of this design change have also been demonstrated on the rig. A brief description of the test rig facility will be provided together with some insights into the successful completion of the test programme. Comparisons will be provided of disc rim cooling performance, for a range of cooling flows and geometry configurations. The new elements of this work are the presentation of additional test data and validation of the automatically coupled analysis method applied to a partially cooled stator well cavity, (i.e. including some local gas ingestion); also the extension of the cavity cooling design optimisation study to other new geometries.

Main Annulus Gas Path Interactions—Turbine Stator Well Heat Transfer

2013 ◽  
Vol 136 (2) ◽  
Author(s):  
Jeffrey A. Dixon ◽  
Antonio Guijarro Valencia ◽  
Daniel Coren ◽  
Daniel Eastwood ◽  
Christopher Long
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Effective Means ◽  
Engine Performance ◽  
Flow Distribution ◽  
Coupled Analysis ◽  
Test Rig ◽  
Cooling Flow ◽  
Turbine Stator ◽  
Optimization Study

This paper summarizes the work of a five year research program into the heat transfer within cavities adjacent to the main annulus of a gas turbine. The work has been a collaboration between several gas turbine manufacturers, also involving a number of universities working together. The principal objective of the study has been to develop and validate computer modeling methods of the cooling flow distribution and heat transfer management, in the environs of multistage turbine disk rims and blade fixings, with a view to maintaining component and subsystem integrity, while achieving optimum engine performance and minimizing emissions. A fully coupled analysis capability has been developed using combinations of commercially available and in-house computational fluid dynamics (CFD) and finite element (FE) thermomechanical modeling codes. The main objective of the methodology is to help decide on optimum cooling configurations for disk temperature, stress, and life considerations. The new capability also gives us an effective means of validating the method by direct use of disk temperature measurements, where otherwise, additional and difficult to obtain parameters, such as reliable heat flux measurements, would be considered necessary for validation of the use of CFD for convective heat transfer. A two-stage turbine test rig has been developed and improved to provide good quality thermal boundary condition data with which to validate the analysis methods. A cooling flow optimization study has also been performed to support a redesign of the turbine stator well cavity to maximize the effectiveness of cooling air supplied to the disk rim region. The benefits of this design change have also been demonstrated on the rig. A brief description of the test rig facility will be provided together with some insights into the successful completion of the test program. Comparisons will be provided of disk rim cooling performance for a range of cooling flows and geometry configurations. The new elements of this work are the presentation of additional test data and validation of the automatically coupled analysis method applied to a partially cooled stator well cavity (i.e., including some local gas ingestion) and also the extension of the cavity cooling design optimization study to other new geometries.

Heat Transfer in Turbine Hub Cavities Adjacent to the Main Gas Path Including FE-CFD Coupled Thermal Analysis

2011 ◽  
Author(s):  
Antonio Guijarro Valencia ◽  
Jeffrey A. Dixon ◽  
Attilio Guardini ◽  
Daniel D. Coren ◽  
Daniel Eastwood
Keyword(s):  
Heat Transfer ◽  
Gas Turbines ◽  
Flow Distribution ◽  
Research Programme ◽  
Coupled Analysis ◽  
Analysis Method ◽  
Fe Modelling ◽  
Turbine Stator ◽  
Fuel Burn ◽  
Air Supply

Reliable means of predicting heat transfer in cavities adjacent to the main gas path are increasingly being sought by engineers involved in the design of gas turbines. In this paper an up-dated analysis of the interim results from an extended research programme, MAGPI, sponsored by the EU and several leading gas turbine manufactures and universities, will be presented. Extensive use is made of CFD and FE modelling techniques to understand the thermo-mechanical behaviour and convective heat transfer of a turbine stator well cavity, including the interaction of cooling air supply with the main annulus gas. It is also important to establish the hot running seal clearances for a full understanding of the cooling flow distribution and heat transfer in the cavity. The objective of the study has been to provide a means of optimising the design of such cavities (see Figure 1) for maintaining a safe environment for critical parts, such as disc rims and blade fixings, whilst maximising the turbine efficiency by means of reducing the fuel burn and emissions penalties associated with the secondary airflow system. The modelling methods employed have been validated against data gathered from a dedicated two-stage turbine rig, running at engine representative conditions. Extensive measurements are available for a range of flow conditions and alternative cooling arrangements. The analysis method has been used to inform a design change which will be tested in a second test phase. Data from this test will also be used to further benchmark the analysis method. Comparisons are provided between the predictions and measurements from the original configuration, turbine stator well component temperature survey, including the use of a coupled analysis technique between FE and CFD solutions.

Comparison of 3D Unsteady Transient Conjugate Heat Transfer Analysis on a High Pressure Cooled Turbine Stage With Experimental Data

2017 ◽  
Author(s):  
Jong-Shang Liu ◽  
Mark C. Morris ◽  
Malak F. Malak ◽  
Randall M. Mathison ◽  
Michael G. Dunn
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Heat Flux ◽  
High Pressure ◽  
High Temperature ◽  
Gas Turbine ◽  
Conjugate Heat Transfer ◽  
Turbine Rotor ◽  
Turbine Stage ◽  
Cooling Flow

In order to have higher power to weight ratio and higher efficiency gas turbine engines, turbine inlet temperatures continue to rise. State-of-the-art turbine inlet temperatures now exceed the turbine rotor material capability. Accordingly, one of the best methods to protect turbine airfoil surfaces is to use film cooling on the airfoil external surfaces. In general, sizable amounts of expensive cooling flow delivered from the core compressor are used to cool the high temperature surfaces. That sizable cooling flow, on the order of 20% of the compressor core flow, adversely impacts the overall engine performance and hence the engine power density. With better understanding of the cooling flow and accurate prediction of the heat transfer distribution on airfoil surfaces, heat transfer designers can have a more efficient design to reduce the cooling flow needed for high temperature components and improve turbine efficiency. This in turn lowers the overall specific fuel consumption (SFC) for the engine. Accurate prediction of rotor metal temperature is also critical for calculations of cyclic thermal stress, oxidation, and component life. The utilization of three-dimensional computational fluid dynamics (3D CFD) codes for turbomachinery aerodynamic design and analysis is now a routine practice in the gas turbine industry. The accurate heat-transfer and metal-temperature prediction capability of any CFD code, however, remains challenging. This difficulty is primarily due to the complex flow environment of the high-pressure turbine, which features high speed rotating flow, coupling of internal and external unsteady flows, and film-cooled, heat transfer enhancement schemes. In this study, conjugate heat transfer (CHT) simulations are performed on a high-pressure cooled turbine stage, and the heat flux results at mid span are compared to experimental data obtained at The Ohio State University Gas Turbine Laboratory (OSUGTL). Due to the large difference in time scales between fluid and solid, the fluid domain is simulated as steady state while the solid domain is simulated as transient in CHT simulation. This paper compares the unsteady and transient results of the heat flux on a high-pressure cooled turbine rotor with measurements obtained at OSUGTL.

Heat Transfer Measurements of Oblong Pins

2014 ◽  
Author(s):  
Kathryn L. Kirsch ◽  
Karen A. Thole
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Flow Direction ◽  
Effective Means ◽  
Transfer Enhancement ◽  
Pin Fin ◽  
The Third ◽  
Pin Fins ◽  
Two Peaks ◽  
Pin Fin Arrays

Pin fin arrays are employed as an effective means for heat transfer enhancement in the internal passages of a gas turbine blade, specifically in the blade’s trailing edge. Various shapes of the pin itself have been used in such arrays. In this study, oblong pin fins are investigated whereby their long axis is perpendicular to the flow direction. Heat transfer measurements were taken at the pin mid-span with unheated endwalls to isolate the pin heat transfer. Results show important differences in the heat transfer patterns between a pin in the first row and a pin in the third row. In the third row, wider spanwise spacing allows for two peaks in heat transfer over the pin surface. Additionally, closer streamwise spacing leads to consistently higher heat transfer for the same spanwise spacing. Due to the blunt orientation of the pins, the peak in heat transfer occurs off the stagnation point.

The Application of Convective Cooling Enhancement of Span-Wise Cooling Holes in a Typical First Stage Turbine Blade

1991 ◽  
Author(s):  
D. J. Stankiewicz ◽  
T. R. Kirkham
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Reynolds Numbers ◽  
Transfer Enhancement ◽  
Test Rig ◽  
Heated Oil ◽  
Cooling Enhancement ◽  
Mach And Reynolds Numbers

A technique of heat transfer enhancement is investigated whereby the internal span-wise cooling passages of a typical first stage gas turbine blade are modified by the introduction of circumferential ribs. The technique is verified by the use of a test rig incorporating a heated internally ribbed tube operating at the same range of Mach and Reynolds numbers as the turbine blade as well as by a test rig incorporating actual production blades immersed in a heated oil bath.

A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB2

2019 ◽  
Vol 45 (18) ◽  
pp. 24060-24069 ◽  
Author(s):  
Sahar Nekahi ◽  
Kourosh Vaferi ◽  
Mohammad Vajdi ◽  
Farhad Sadegh Moghanlou ◽  
Mehdi Shahedi Asl ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Stress ◽  
Gas Turbine ◽  
Numerical Approach ◽  
Turbine Stator ◽  
Stator Blade

scholarly journals Conjugate Heat Transfer of an Internally Air-Cooled Nozzle Guide Vane and Shrouds

2014 ◽  
Vol 6 ◽  
pp. 146523 ◽  
Author(s):  
Leiyong Jiang ◽  
Xijia Wu ◽  
Zhong Zhang
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Conjugate Heat Transfer ◽  
Guide Vane ◽  
Operating Conditions ◽  
Temperature Fields ◽  
Pressure Side ◽  
Cooling Flow ◽  
Nozzle Guide Vane ◽  
Nozzle Guide

In order to assess the life of gas turbine critical components, it is essential to adequately specify their aerothermodynamic working environments. Steady-state analyses of the flow field and conjugate heat transfer of an internally air-cooled nozzle guide vane (NGV) and shrouds of a gas turbine engine at baseline operating conditions are numerically investigated. A high-fidelity CFD model is generated and the simulations are carried out with properly defined boundary conditions. The features of the complicated flow and temperature fields are revealed. In general, the Mach number is lower and the temperature is higher on the NGV pressure side than those on the suction side. There are two high temperature regions on the pressure side, and the temperature across the middle section is relatively low. These findings are closely related to the locations of the holes and outlets of the cooling flow passage, and consistent with the field observations of damaged NGVs. As a technology demonstration, the results provide required information for the life analysis of the NGV/shrouds assembly and improvement of the cooling flow arrangement.

Effect of Rotation on Heat Transfer in AR = 2:1 and AR = 4:1 Channels Connected by a Series of Crossover Jets

2021 ◽  
pp. 1-19
Author(s):  
Srivatsan Madhavan ◽  
Prashant Singh ◽  
Srinath V. Ekkad
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Turbine Blade ◽  
Flow Direction ◽  
Gas Turbine Blade ◽  
Trailing Edge ◽  
Cooling Flow ◽  
Liquid Crystal Thermography ◽  
Pin Fins ◽  
Rib Turbulators

Abstract Detailed heat transfer measurements using transient liquid crystal thermography were performed on a novel cooling design covering the mid-chord and trailing edge region of a typical gas turbine blade under rotation. The test section comprised of two channels with aspect ratio (AR) of 2:1 and 4:1, where the coolant was fed into the AR = 2:1 channel. Rib turbulators with a pitch-to-rib height ratio (p/e) of 10 and rib height-to-channel hydraulic diameter ratio (e/Dh) of 0.075 were placed in the AR = 2:1 channel at 60° relative to flow direction. The coolant after entering this section was routed to the AR = 4:1 section through a set of crossover jets. The 4:1 section had a realistic trapezoidal shape that mimics the trailing edge of an actual gas turbine blade. The pin fins were arranged in a staggered array with a center-to-center spacing of 2.5 times pin diameter. The trailing edge section consisted of radial and cutback exit holes for flow exit. Experiments were performed for Reynolds number of 20,000 at Rotation numbers (Ro) of 0, 0.1 and 0.14. The channel averaged heat transfer coefficient on trailing side was ~28% (AR = 2:1) and ~7.6% (AR = 4:1) higher than the leading side for Ro = 0.1. It is shown that the combination of crossover jets and pin-fins can be an effective method for cooling wedge shaped trailing edge channels over axial cooling flow designs.

Experimental Survey on Heat Transfer in a Trailing Edge Cooling System: Effects of Rotation in Internal Cooling Ducts

2012 ◽  
Author(s):  
L. Bonanni ◽  
C. Carcasci ◽  
B. Facchini ◽  
L. Tarchi
Keyword(s):  
Heat Transfer ◽  
High Pressure ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Gas Turbine ◽  
Cooling System ◽  
Internal Cooling ◽  
Test Rig ◽  
Trailing Edge ◽  
Tip Mass

The high thermal loads, the heavy structural stresses and the small thickness required for aerodynamic performances make the trailing edge cooling (TE) cooling of high pressure gas turbine blades a critical challenge. The presented paper point out an experimental study focusing the aerothermal performance of a TE internal cooling system of a high pressure gas turbine blade, evaluated under stationary and rotating conditions. The investigated geometry consists of a 30:1 scaled model reproducing the typical wedge shaped discharge duct with one row of enlarged pedestals. The airflow pattern inside the device simulates a highly loaded rotor blade cooling scheme with a 90° turning flow from the radial hub inlet to the tangential TE outlet. Two different tip configurations were tested, the first one with a completely closed section, the second one with 5 holes on the tip outlet surfaces discharging at ambient pressure. To investigate the rotation effects on the trailing edge cooling system performance, a rotating test rig was purposely developed and manufactured. The test rig is composed by a rotating arm that holds the PMMA TE model and the instrumentation. A thin Inconel heating foil and wide band Thermo-chromic Liquid Crystals are used to perform steady state heat transfer measurements. A rotary joint ensures the pneumatic connection between the blower and the rotating apparatus, moreover several slip rings are used for both instrumentation power supply and thermocouple connection. Heat transfer coefficient measurements were made with fixed Reynolds number close to 20k in the hub inlet section and with variable rotating speed in order to set the Rotation number from 0 (non rotational test) up to 0.3. Six different configurations were tested: two different tip mass flow rates (the first one with a completely closed tip, the second one with the 12.5% of the inlet flow discharged from the tip) and three different surface conditions: the first one consists in the flat plate case and the others in two ribbed cases, with different angular orientation (60° and −60° respect to the radial direction). Results are reported in terms of detailed heat transfer coefficient 2D maps on the suction side surface as well as span-wise profiles inside the pedestal ducts. The reported work has been supported by the Italian Ministry of Education, University and Research (MIUR).

Sign in / Sign up

Export Citation Format

Share Document