Power Law Versus Exponential Form of Slow Crack Growth of Advanced Structural Ceramics: Dynamic Fatigue

2002 ◽  
Author(s):  
Sung R. Choi ◽  
John P. Gyekenyesi
Keyword(s):  
Crack Growth ◽  
Power Law ◽  
Crack Velocity ◽  
Elevated Temperatures ◽  
Slow Crack Growth ◽  
Stress Rate ◽  
Structural Ceramics ◽  
Rate Relation ◽  
Rate Dynamic ◽  
Dynamic Fatigue

The life prediction analysis based on an exponential crack velocity formulation was examined using a variety of experimental data on glass and advanced structural ceramics in constant stress-rate (“dynamic fatigue”) and preload testing at ambient and elevated temperatures. The data fit to the strength versus ln (stress rate) relation was to found be very reasonable for most of the materials. It was also found that preloading technique was equally applicable for the case of slow crack growth (SCG) parameter n>30. The major limitation in the exponential crack velocity formulation, however, was that an inert strength of a material must be known priori to evaluate the important SCG parameter n, a significant drawback as compared to the conventional power-law crack velocity formulation.

Slow Crack Growth of a Pyroceram Glass Ceramic Under Static Fatigue Loading: Commonality of Slow Crack Growth in Advanced Ceramics

2014 ◽  
Author(s):  
Sung R. Choi ◽  
D. Calvin Faucett ◽  
Brenna Skelley
Keyword(s):  
Crack Growth ◽  
Glass Ceramic ◽  
Life Prediction ◽  
Elevated Temperatures ◽  
Slow Crack Growth ◽  
Static Fatigue ◽  
Fatigue Data ◽  
Prediction Approach ◽  
Applied Stresses ◽  
Dynamic Fatigue

An extensive experimental work for Pyroceram™ 9606 glass-ceramic was conducted to determine static fatigue at ambient temperature in distilled water. This work was an extension and companion of the previous work conducted in dynamic fatigue. Four different applied stresses ranging from 120 to 170 MPa was incorporated with a total of 20–23 test specimens used at each of four applied stresses. The slow crack growth parameters n and D were found to be n = 19 and D = 45 with a coefficient of correlation of rcoef = 0.9653. The Weibull modulus of time to failure was in a range of msf = 1.6 to 1.9 with an average of msf = 1.7±0.2. A life prediction using the previously-determined dynamic fatigue data was in excellent agreement with the static fatigue data. The life prediction approach was also applied to advanced monolithic ceramics and ceramic matrix composites based on their dynamic and static fatigue data determined at elevated temperatures. All of these results indicated that a SCG mechanism governed by a power-law crack-growth formulation was operative, a commonality of slow crack growth in these materials systems.

Slow Crack Growth of a Pyroceram Glass Ceramic Under Static Fatigue Loading—Commonality of Slow Crack Growth in Advanced Ceramics

2014 ◽  
Vol 137 (3) ◽  
Author(s):  
Sung R. Choi ◽  
D. Calvin Faucett ◽  
Brenna Skelley
Keyword(s):  
Crack Growth ◽  
Glass Ceramic ◽  
Life Prediction ◽  
Elevated Temperatures ◽  
Slow Crack Growth ◽  
Static Fatigue ◽  
Fatigue Data ◽  
Prediction Approach ◽  
Applied Stresses ◽  
Dynamic Fatigue

An extensive experimental work for Pyroceram™ 9606 glass–ceramic was conducted to determine static fatigue at ambient temperature in distilled water. This work was an extension and companion of the previous work conducted in dynamic fatigue. Four different applied stresses ranging from 120 to 170 MPa was incorporated with a total of 20–23 test specimens used at each of four applied stresses. The slow crack growth (SCG) parameters n and D were found to be n = 19 and D = 45 with a coefficient of correlation of rcoef = 0.9653. The Weibull modulus of time to failure was in a range of msf = 1.6–1.9 with an average of msf = 1.7 ± 0.2. A life prediction using the previously determined dynamic fatigue data was in excellent agreement with the static fatigue data. The life prediction approach was also applied to advanced monolithic ceramics and ceramic matrix composites (CMCs) based on their dynamic and static fatigue data determined at elevated temperatures. All of these results indicated that a SCG mechanism governed by a power-law crack growth formulation was operative, a commonality of SCG in these materials systems.

Sign in / Sign up

Export Citation Format

Share Document