Simulation of the Interaction of Labyrinth Seal Leakage Flow and Main Flow in an Axial Turbine

2002 ◽  
Author(s):  
Jan E. Anker ◽  
Ju¨rgen F. Mayer
Keyword(s):  
Experimental Data ◽  
Labyrinth Seal ◽  
Main Flow ◽  
Rotor Blades ◽  
Navier Stokes ◽  
Test Case ◽  
Leakage Flow ◽  
Computational Results ◽  
Axial Turbine ◽  
The Impact

This paper presents the simulation of the flow in a 1.5 stage low-speed axial turbine with shrouded rotor blades and focuses on the interaction of the labyrinth seal leakage flow with the main flow. The presented results were obtained using the Navier-Stokes code ITSM3D developed at University of Stuttgart. A comparison of the computational results with experimental data of this test case gained at Ruhr-Universita¨t Bochum verifies that the flow solver is capable of reproducing the leakage flow effects to a sufficient extent. The computational results are used to examine the influence of the leakage flow on the flow field of the turbine. By varying the clearance height of the labyrinth in the simulations, the impact of the re-entering leakage flow on the main flow is studied. As demonstrated in this paper, leakage flow not only introduces mixing losses but can also dominate the secondary flow and induce severe losses. In agreement with the experimental data the computational results show that at realistic clearance heights the leakage flow gives rise to negative incidence over a considerable part of the downstream stator which causes the flow to separate.

Unsteady Interaction of Labyrinth Seal Leakage Flow and Downstream Stator Flow in a Shrouded 1.5 Stage Axial Turbine

2005 ◽  
Author(s):  
P. Peters ◽  
J. R. Menter ◽  
H. Pfost ◽  
A. Giboni ◽  
K. Wolter
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Numerical Data ◽  
Labyrinth Seal ◽  
Rotor Blades ◽  
Navier Stokes ◽  
Experimental Program ◽  
Leakage Flow ◽  
Axial Turbine ◽  
Flow Phenomena

This paper presents the results of experimental and numerical investigations into the flow in a 1.5-stage low-speed axial turbine with shrouded rotor blades and a straight through labyrinth seal. The paper focuses on the time dependent influence of the leakage flow on the downstream stator flow field. The experimental program consists of time accurate measurements of the three-dimensional properties of the flow through ten different measurement planes in the stator passage. The measurements were carried out using pneumatic five-hole probes and three dimensional hot-wire probes at the design operating point of the turbine. The measurement planes extend from the shroud to the casing. The complex three-dimensional flow field is mapped in great detail by 4,800 measurement points and 20 time steps per blade passing period. The time-accurate experimental data of the ten measurement planes was compared with the results of unsteady, numerical simulations of the turbine flow. The 3D-Navier-Stokes Solver CFX-TASCflow was used. The experimental and numerical results correspond well and allow detailed analysis of the flow phenomena. Additionally numerical data behind the rotor is used to connect the entry of the leakage flow with the flow phenomena in the downstream stator passage and behind it. The leakage flow causes strong fluctuations of the flow in the downstream stator. Above all, the high number of measurement points reveals both the secondary flow phenomena and the vortex structures within the blade passage. The time-dependence of both the position and the intensity of the vortices influenced by the leakage flow is shown. The paper shows that even at realistic clearance heights the leakage flow influences considerable parts of the downstream stator and gives rise to negative incidence and flow separation. Thus, labyrinth seal leakage flow should be taken properly into account in the design or optimization process of turbines.

Experimental and Numerical Investigation Into the Unsteady Interaction of Labyrinth Seal Leakage Flow and Main Flow in a 1.5-Stage Axial Turbine

2004 ◽  
Author(s):  
A. Giboni ◽  
K. Wolter ◽  
J. R. Menter ◽  
H. Pfost
Keyword(s):  
Secondary Flow ◽  
Three Dimensional ◽  
Labyrinth Seal ◽  
Main Flow ◽  
Navier Stokes ◽  
Experimental Program ◽  
Leakage Flow ◽  
Axial Turbine ◽  
Flow Phenomena ◽  
Grid Points

This paper presents the results of experimental and numerical investigations into the flow in a 1.5-stage low-speed axial turbine with a straight labyrinth seal on the rotor shroud. The paper focuses on the time dependent interaction between the leakage flow and the main flow. The experimental program consists of time accurate measurements of the three-dimensional properties of the main flow. The region of the entering leakage flow downstream of the rotor trailing edge was of special interest. The measurements were carried out using pneumatic five-hole probes and three dimensional hot-wire probes at the design operating point of the turbine. The measurement planes behind the three blade rows extend over one pitch from the shroud to the casing. The complex three-dimensional flow field is mapped in great detail by 1,008 points per measurement plane. The time-accurate experimental data of the three measurement planes was compared with the results of unsteady, numerical simulations of the turbine flow. The 3D-Navier-Stokes Solver CFX-TASCflow was used. The experimental and numerical results correspond well and allow detailed analysis of the mixing process. As demonstrated in this paper, the leakage flow causes strong fluctuations of the secondary flow behind the rotor and the second stator. Above all, the high number of numerical grid points reveals both the secondary flow phenomena and the vortex structures of the mixing zone. The time-dependence of both position and intensity of the vortices is shown. The development of the important leakage vortex is illustrated and explained. The paper shows that even at realistic clearance heights the leakage flow gives rise to negative incidence of considerable parts of the downstream stator which causes the flow to separate. Thus, labyrinth seal leakage flow should be taken properly into account in the design or optimization process of turbomachinery.

Interaction of Shroud Leakage Flow and Main Flow in a Three-Stage LP Turbine

2003 ◽  
Vol 127 (4) ◽  
pp. 649-658 ◽  
Author(s):  
Jochen Gier ◽  
Bertram Stubert ◽  
Bernard Brouillet ◽  
Laurent de Vito
Keyword(s):  
Main Flow ◽  
Secondary Flows ◽  
Test Facility ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Jet Engines ◽  
Flow Interactions ◽  
Lp Turbine ◽  
The Impact ◽  
The Ideal

Endwall losses significantly contribute to the overall losses in modern turbomachinery, especially when aerodynamic airfoil load and pressure ratios are increased. In turbines with shrouded airfoils a large portion of these losses are generated by the leakage flow across the shroud clearance. Generally the related losses can be grouped into losses of the leakage flow itself and losses caused by the interaction with the main flow in subsequent airfoil rows. In order to reduce the impact of the leakage flow and shroud design related losses a thorough understanding of the leakage losses and especially of the losses connected to enhancing secondary flows and other main flow interactions has to be understood. Therefore, a three stage LP turbine typical for jet engines is being investigated. For the three-stage test turbine 3D Navier-Stokes computations are performed simulating the turbine including the entire shroud cavity geometry in comparison with computations in the ideal flow path. Numerical results compare favorably against measurements carried out at the high altitude test facility at Stuttgart University. The differences of the simulations with and without shroud cavities are analyzed for several points of operation and a very detailed quantitative loss breakdown is presented.

Interaction of Labyrinth Seal Leakage Flow and Main Flow in an Axial Turbine

2003 ◽  
Author(s):  
A. Giboni ◽  
J. R. Menter ◽  
P. Peters ◽  
K. Wolter ◽  
H. Pfost ◽  
...  
Keyword(s):  
Secondary Flow ◽  
Three Dimensional ◽  
Labyrinth Seal ◽  
Main Flow ◽  
Experimental Program ◽  
Leakage Flow ◽  
Axial Turbine ◽  
Measurement Plane ◽  
Flow Phenomena ◽  
Operating Points

This paper presents the results of an experimental investigation into the flow in a 1.5-stage low-speed axial turbine with a straight labyrinth seal on the rotor shroud. The paper focuses on the interaction between the leakage flow and the main flow. The experimental program consists of measurements of the three-dimensional properties of the main flow downstream of the rotor trailing edge after the re-injection of the leakage flow. The measurements were carried out using pneumatic five-hole probes and three dimensional hot-wire probes at different operating points of the turbine. The measurement plane behind the rotor extends over one pitch from the shroud to the casing, with the complex three-dimensional flow field being mapped in great detail by 1,008 measurement points. As demonstrated in this paper, the entering leakage flow not only introduces mixing losses but also predominates the secondary flow behind the rotor and the second stator. The experimental data show that even at realistic clearance heights the leakage flow gives rise to negative incidence of considerable parts of the downstream stator which causes the flow to separate. Thus, labyrinth seal leakage flow should be taken properly into account in the design or optimisation process of turbomachinery. The high number of measurement points allows detailed analysis of the secondary flow phenomena and of the vortex structures. The time-dependence of the position and the intensity of the vortices is shown and the influence of the turbine’s operating point is presented.

Modeling and Analysis of Main Flow–Shroud Leakage Flow Interaction in LP Turbines

2006 ◽  
Author(s):  
Jochen Gier ◽  
Karl Engel ◽  
Bertram Stubert ◽  
Ralf Wittmaack
Keyword(s):  
Main Flow ◽  
Navier Stokes ◽  
Aerodynamic Load ◽  
Leakage Flow ◽  
Modeling And Analysis ◽  
Simplified Approach ◽  
Leakage Flows ◽  
Flow Phenomena ◽  
Flow Effects ◽  
The Impact

Endwall losses significantly contribute to the overall losses in modern turbomachinery, especially when aerodynamic load and pressure ratios are increased. In turbines with shrouded airfoils a large portion of these losses are generated by the leakage flow across the shroud clearance. For the design of modern jet engine turbines it becomes increasingly important to include the impact of shroud leakage flows in the aerodynamic design. There are two main aspects connected to this issue. The first aspect is to optimize the cavity flow and its interaction with the main flow. The second aspect is to perform the airfoil design with boundary conditions, which include the shroud leakage flow effects. In comparison to the simplified approach of neglecting the real endwall geometry and leakage flow this should enable the designer to produce improved airfoils for the entire span. In order to address the second aspect of supporting the airfoil design with improved shroud leakage consideration within the airfoil design process, an efficient procedure for modeling the shroud leakage flow has been implemented into the design Navier-Stokes code. The intention is to model the major leakage flow phenomena without the necessity of pre-defining all details of the shroud geometry. In the paper the results of this model are compared to conventional computations, computations with mesh-resolved cavities and experimental data. The differences are discussed and the impact of certain configuration aspects are analyzed.

Tip Leakage/Main Flow Interactions in Multi-Stage HP Turbines With Short-Height Blading

2004 ◽  
Author(s):  
Piotr Lampart ◽  
Sergey Yershov ◽  
Andrey Rusanov ◽  
Mariusz Szymaniak
Keyword(s):  
Labyrinth Seal ◽  
Main Flow ◽  
Rotor Blades ◽  
Navier Stokes ◽  
Blade Passage ◽  
Tip Leakage ◽  
Multi Stage ◽  
Flow Interactions ◽  
Sst Turbulence Model ◽  
Downstream Flow

Interaction of the main flow with tip leakage over shrouded rotor blades in a multi-stage turbine is studied numerically. The flow in blade-to-blade channels is computed with the aid of a 3D Navier-Stokes solver FlowER with the Menter SST turbulence model. In this paper, the labyrinth seals are not computed but the numerical scheme is modified to include the source/sink-type boundary conditions at places at the endwalls referring to design locations of injection of leakage flows into, or their extraction from, the blade-to-blade passage. Without considering complete labyrinth seal geometries, the tip leakage jet is represented by its flow rate and direction at re-entry to the blade-to-blade passage, as if referring to the performance of a range of different labyrinth seal arrangements. The effect of direction of tip leakage re-entry on the downstream flow and efficiency of the turbine stage (stage group) is studied. The calculation method is validated on a model air stator/rotor turbine.

Interaction of Shroud Leakage Flow and Main Flow in a Three-Stage LP Turbine

2003 ◽  
Author(s):  
Jochen Gier ◽  
Bertram Stubert ◽  
Bernard Brouillet ◽  
Laurent de Vito
Keyword(s):  
Main Flow ◽  
Secondary Flows ◽  
Test Facility ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Jet Engines ◽  
Flow Interactions ◽  
Lp Turbine ◽  
The Impact ◽  
The Ideal

Endwall losses significantly contribute to the overall losses in modern turbomachinery, especially when aerodynamic airfoil load and pressure ratios are increased. In turbines with shrouded airfoils a large portion of these losses are generated by the leakage flow across the shroud clearance. Generally the related losses can be grouped into losses of the leakage flow itself and losses caused by the interaction with the main flow in subsequent airfoil rows. In order to reduce the impact of the leakage flow and shroud design related losses a thorough understanding of the leakage losses and especially of the losses connected to enhancing secondary flows and other main flow interactions has to be understood. Therefore, a three stage LP turbine typical for jet engines is being investigated. For the three-stage test turbine 3D Navier-Stokes computations are performed simulating the turbine including the entire shroud cavity geometry in comparison with computations in the ideal flow path. Numerical results compare favourably against measurements carried out at the high altitude test facility at Stuttgart University. The differences of the simulations with and without shroud cavities are analysed for several points of operation and a very detailed quantitative loss breakdown is presented.

Leakage flow analysis in the gas turbine shroud gap

2019 ◽  
Vol 91 (8) ◽  
pp. 1077-1085 ◽  
Author(s):  
Filip Wasilczuk ◽  
Pawel Flaszynski ◽  
Piotr Kaczynski ◽  
Ryszard Szwaba ◽  
Piotr Doerffer ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Gas Turbine ◽  
Mass Flow ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Original Design ◽  
Reference Case ◽  
Content Type ◽  
Flow Through ◽  
The Impact

Purpose The purpose of the study is to measure the mass flow in the flow through the labyrinth seal of the gas turbine and compare it to the results of numerical simulation. Moreover the capability of two turbulence models to reflect the phenomenon will be assessed. The studied case will later be used as a reference case for the new, original design of flow control method to limit the leakage flow through the labyrinth seal. Design/methodology/approach Experimental measurements were conducted, measuring the mass flow and the pressure in the model of the labyrinth seal. It was compared to the results of numerical simulation performed in ANSYS/Fluent commercial code for the same geometry. Findings The precise machining of parts was identified as crucial for obtaining correct results in the experiment. The model characteristics were documented, allowing for its future use as the reference case for testing the new labyrinth seal geometry. Experimentally validated numerical model of the flow in the labyrinth seal was developed. Research limitations/implications The research studies the basic case, future research on the case with a new labyrinth seal geometry is planned. Research is conducted on simplified case without rotation and the impact of the turbine main channel. Practical implications Importance of machining accuracy up to 0.01 mm was found to be important for measuring leakage in small gaps and decision making on the optimal configuration selection. Originality/value The research is an important step in the development of original modification of the labyrinth seal, resulting in leakage reduction, by serving as a reference case.

Sign in / Sign up

Export Citation Format

Share Document