Fluid Dynamics of Hydrophilous Pollination in Ruppia (Widgeon Grass)

Author(s):  
Naga Musunuri ◽  
Ian Fischer ◽  
Pushpendra Singh ◽  
Daniel E. Bunker ◽  
Susan Pell

The aim of this work is to understand the physics underlying the mechanisms of two-dimensional aquatic pollen dispersal, known as hydrophily, that have evolved in several genera of aquatic plants, including Halodule, Halophila, Lepilaena, and Ruppia. We selected Ruppia maritima, which is native to salt and brackish waters circumglobally, for this study. We observed two mechanisms by which the pollen released from male inflorescences of Ruppia is adsorbed on a water surface: 1) inflorescences rise above the water surface and after they mature their pollen mass falls onto the surface as clumps and disperses as it comes in contact with the surface; 2) inflorescences remain below the surface and produce air bubbles which carry pollen mass to the surface where it disperses. In both cases dispersed pollen masses combined with others under the action of lateral capillary forces to form pollen rafts. The formation of porous pollen rafts increases the probability of pollination since the attractive capillary force on a pollen raft toward a stigma is much larger than on a single pollen grain. The presence of a trace amount of surfactant can disrupt the pollination process as the pollen is not captured or transported on the water surface.

Author(s):  
Jae-Min Jeong ◽  
Se Bin Jin ◽  
Seon Gyu Son ◽  
Hoyoung Suh ◽  
Jong-Min Moon ◽  
...  

2D FeIII nanosheets are synthesized by a fluid dynamics–assisted exfoliation and oxidation method for highly-catalyzed glycolysis reaction of PET.


1997 ◽  
Vol 119 (5) ◽  
pp. 933-942 ◽  
Author(s):  
Isabelle Weissbuch ◽  
Maria Berfeld ◽  
Wim Bouwman ◽  
Kristian Kjaer ◽  
Jens Als-Nielsen ◽  
...  

Author(s):  
Sunita Kruger ◽  
Leon Pretorius

In this paper, the influence of various bench arrangements on the microclimate inside a two-span greenhouse is numerically investigated using three-dimensional Computational Fluid Dynamics (CFD) models. Longitudinal and peninsular arrangements are investigated for both leeward and windward opened roof ventilators. The velocity and temperature distributions at plant level (1m) were of particular interest. The research in this paper is an extension of two-dimensional work conducted previously [1]. Results indicate that bench layouts inside the greenhouse have a significant effect on the microclimate at plant level. It was found that vent opening direction (leeward or windward) influences the velocity and temperature distributions at plant level noticeably. Results also indicated that in general, the leeward facing greenhouses containing either type of bench arrangement exhibit a lower velocity distribution at plant level compared to windward facing greenhouses. The latter type of greenhouses has regions with relatively high velocities at plant level which could cause some concern. The scalar plots indicate that more stagnant areas of low velocity appear for the leeward facing greenhouses. The windward facing greenhouses also display more heterogeneity at plant level as far as temperature is concerned.


1994 ◽  
Vol 21 (3) ◽  
pp. 471-489 ◽  
Author(s):  
Paul Boudreau ◽  
Michel Leclerc ◽  
Guy R. Fortin

The macrophytes (aquatic plants) can have a substantial effect on the hydrodynamics of some watercourses. A mathematical formulation for the resistance effect of macrophytes on the current is inserted in a two-dimensional finite element hydrodynamic model. The method introduced herein allows to take into account the morphology, the density, and the growth curve of the different species of macrophytes present in the river. The Lake Saint-Pierre between Sorel and Trois-Rivières (Québec, Canada) in the St. Lawrence River is used to demonstrate the approach. The mathematical aspect of the model is first briefly presented. The field surveys of macrophytes and some other data sets used with the model are then analyzed. Finally, after the calibration–validation step, which insures the good behavior of the model, some results are presented to show the effect of the macrophytes on the flow structure. Key words: hydrodynamics, aquatic plants, St. Lawrence River, Lake Saint-Pierre, two-dimensional modelling, simulation, finite element method, Manning's coefficient.


Author(s):  
Sunita Kruger ◽  
Leon Pretorius

In this paper, the use of computational fluid dynamics is evaluated as a design tool to investigate the indoor climate of a confined greenhouse. The finite volume method using polyhedral cells is used to solve the governing mass, momentum and energy equations. Natural convection in a cavity corresponding to a mono-span venlo-type greenhouse is numerically investigated using Computational Fluid Dynamics. The CFD model is designed so as to simulate the climate above a plant canopy in an actual multi-span greenhouse heated by solar radiation. The aim of this paper is to investigate the influence of various design parameters such as pitch angle and roof asymmetry and on the velocity and temperature patterns inside a confined single span greenhouse heated from below. In the study reported in this paper a two-dimensional CFD model was generated for the mono-span venlo-type greenhouse, and a mesh sensitivity analysis was conducted to determine the mesh independence of the solution. Similar two-dimensional flow patterns were observed in the obtained CFD results as the experimental results reported by Lamrani et al [2]. The CFD model was then modified and used to explore the effect of roof pitch angle and roof asymmetry at floor level on the development of the flow and temperature patterns inside the cavity for various Rayleigh numbers. Results are presented in the form of vector and contour plots. It was found that considerable temperature and velocity gradients were observed in the centre of the greenhouse for each case in the first 40mm above the ground, as well as in the last 24mm close to the roof. Results also indicated that the Rayleigh number did not have a significant impact on the flow and temperature patterns inside the greenhouse, although roof angle and asymmetry did. The current results demonstrate the importance of CFD as a design tool in the case of greenhouse design.


2005 ◽  
Vol 498-499 ◽  
pp. 179-185
Author(s):  
A.F. Lacerda ◽  
Luiz Gustavo Martins Vieira ◽  
A.M. Nascimento ◽  
S.D. Nascimento ◽  
João Jorge Ribeiro Damasceno ◽  
...  

A two-dimensional fluidynamics model for turbulent flow of gas in cyclones is used to evaluate the importance of the anisotropic of the Reynolds stress components. This study presents consisted in to simulate through computational fluid dynamics (CFD) package the operation of the Lapple cyclone. Yields of velocity obtained starting from a model anisotropic of the Reynolds stress are compared with experimental data of the literature, as form of validating the results obtained through the use of the Computational fluid dynamics (Fluent). The experimental data of the axial and swirl velocities validate numeric results obtained by the model.


2013 ◽  
Vol 714 ◽  
pp. 361-392 ◽  
Author(s):  
H. Lhuissier ◽  
E. Villermaux

AbstractA planar Savart water sheet uniformly seeded with small air bubbles in a large surface concentration is studied as a model experiment of the so-called ‘effervescent’ atomization process. This two-dimensional setup allows for a quantitative observation of all the steps of the sheet’s disintegration into a collection of disjointed droplets. The bubbles are heterogeneous nucleation sites which puncture the sheet with holes. The dynamics of the opening of holes competes with the simultaneous nucleation rate of new holes in a statistically stationary fashion. The liquid constituting the sheet is then transiently concentrated in a web of ligaments of various lengths and diameters, at the junction between adjacent holes. Their breakup produces the final spray. We provide a complete description of the ligament web statistics when nucleation is synchronous, and we show that the drop size dispersion from the breakup of a single ligament is responsible for the shape of the overall spray drop size distribution.


Sign in / Sign up

Export Citation Format

Share Document