Advancement in CFB Technology: A Combination of Excellent Environmental Performance and High Efficiency

2005 ◽  
Author(s):  
George N. Stamatelopoulos ◽  
Joachim Seeber ◽  
Richard S. Skowyra
Keyword(s):  
Power Generation ◽  
Environmental Performance ◽  
High Efficiency ◽  
Environmental Legislation ◽  
Wide Range

The CFB technology achieved its commercial breakthrough in the field of power generation in the late eighties as a result of: • very low emissions levels, without secondary measures, that allows the fulfillment of the more stringent environmental legislation; • and the capability to burn a wide range of fuels, that allows the utilization of opportunity fuels.

Self-Cleaning Solar Mirrors Using Electrodynamic Dust Shield: Prospects and Progress

2014 ◽  
Author(s):  
Malay K. Mazumder ◽  
Mark N. Horenstein ◽  
Jeremy W. Stark ◽  
John N. Hudelson ◽  
Arash Sayyah ◽  
...  
Keyword(s):  
Power Generation ◽  
Particle Size ◽  
High Efficiency ◽  
Solar Collectors ◽  
Parabolic Trough ◽  
Atmospheric Dust ◽  
Efficient Operation ◽  
Dust Layer ◽  
Wide Range ◽  
Self Cleaning

Parabolic trough and power tower technologies provide inherent advantage of thermal energy storage and high efficiency of the Concentrating Solar Power (CSP) systems for utility scale solar plants. High efficiency CSP power generation with minimal water use is one of the SunShot goals of the US Department of Energy. The specular reflectance efficiency of the solar mirrors plays a critical role in the efficiency of power generation. The optical surface of the mirrors and the receiver must be kept clean for efficient operation of the plant. Some environmental challenges in operating the large-scale CSP plants at high reflectance efficiency arise from high concentration of atmospheric dust, wind speed and variation of relative humidity (RH) over a wide range. Deposited dust and other contaminant particles, such as soot, salt, and organic particulate matters attenuate solar radiation by scattering and absorption. Adhesion of these particles on the mirror surface depends strongly by their composition and the moisture content in the atmosphere. Presence of soluble inorganic and organic salts cause corrosion of the mirror unless the contaminants are cleaned frequently. In this paper, we briefly review (1) source of atmospheric dust and mechanisms involved in degradation of mirrors caused by salt particles, (2) loss of specular reflection efficiency as a function of particle size distribution and composition, and (3) an emerging technology for removing dust layer by using thin transparent electrodynamic screen (EDS). Feasibility of integration of EDS on the front surface of the solar collectors has been established to provide active self-cleaning properties for parabolic trough and heliostat reflectors. Prototype EDS-integrated solar collectors including second-surface glass mirrors, metallized acrylic film mirrors, and dielectric mirrors, were produced and tested in an environmental test chambers simulating desert atmospheres. The test results show that frequent removal of dust layer can maintain the specular reflectivity of the mirrors above 90% under dust deposition at a rate ranging from 0 to 10 g/m2, with particle size varying from 1 to 50 μm in diameter. The energy required for removing the dust layer from the solar was less than 10 Wh/m2 per cleaning cycle. EDS based cleaning could therefore be automated and performed as frequently as needed to maintain reflection efficiency above 90% and thus reducing water usage for cleaning mirrors in the solar field. A comparative cost analysis was performed between EDS and deluge water based cleaning that shows the EDS method is commercially viable and would meet water conservation needs.

Doped LaGaO3 Based Solid Oxide Fuel Cell Materials and their Sintering Aspects: An Overview

2009 ◽  
Vol 624 ◽  
pp. 109-137 ◽  
Author(s):  
Pradyot Datta
Keyword(s):  
Power Generation ◽  
High Efficiency ◽  
Operating Temperature ◽  
Solid Oxide ◽  
Ion Conductivity ◽  
Oxide Fuel ◽  
Oxygen Ion Conductivity ◽  
Fuel Cell Materials ◽  
Oxygen Ion ◽  
Wide Range

Solid oxide fuel cells (SOFCs) are electrochemical devices that offer advantages over conventional power generation systems in terms of their high efficiency of power generation, low emission of green house gases and the flexibility of fuel usage. The major research focus of recent times is to lower the operating temperature of SOFC in the range of 600 to 800°C so as to make it commercially viable. This reduction in temperature is largely dependent on finding an electrolyte material with adequate oxygen ion conductivity at the intended operating temperature. One much material is pervoskite LaGaO3 doped with Sr- and Mg- La1-xSrxGa1-yMgyO3-δ (LSGM) that shows very good oxygen ion conductivity at intermediate temperature (600-800°C) over a wide range of oxygen partial pressure. The aim of this overview is to highlight the contribution that materials chemistry has made to the development of LSGM based SOFCs.

Synthesis of Elaborate Benzofuran-2-Carboxamide Derivatives Through a Combination of 8-Aminoquinoline Directed C–H Arylations and Transamidations

2019 ◽  
Author(s):  
Michael Oschmann ◽  
Linus Johansson Holm ◽  
Oscar Verho
Keyword(s):  
Small Molecule ◽  
High Efficiency ◽  
Synthetic Strategy ◽  
Small Molecule Screening ◽  
Physiological Properties ◽  
Wide Range ◽  
Directing Group ◽  
Synthetic Sequence

Benzofurans are everywhere in nature and they have been extensively studied by medicinal chemists over the years because of their chemotherapeutic and physiological properties. Herein, we describe a strategy that can be used to access elaborate benzo-2-carboxamide derivatives, which involves a synthetic sequence of 8-aminoquinoline directed C–H arylations followed by transamidations. For the directed C–H arylations, Pd catalysis was used to install a wide range of aryl and heteroaryl substituents at the C3 position of the benzofuran scaffold in high efficiency. Directing group cleavage and further diversification of the C3-arylated benzofuran products were then achieved in a single synthetic operation through the utilization of a two-step transamidation protocol. By bocylating the 8-aminoquinoline amide moiety of these products, it proved possible to activate them towards aminolysis with different amine nucleophiles. Interestingly, this aminolysis reaction was found to proceed efficiently without the need of any additional catalyst or additive. Given the high efficiency and modularity of this synthetic strategy, it constitute a very attractive approach for generating structurally-diverse collections of benzofuran derivatives for small molecule screening.

To the 70th anniversary of World Meteorological Organization. Scientific and technical cooperation of Hydrometeorological Center of the USSR/Russia in the Programs of World Meteorological Organization

2020 ◽  
pp. 117-138
Author(s):  
S.V. Borshch ◽  
◽  
R.M. Vil’fand ◽  
D.B. Kiktev ◽  
V.M. Khan ◽  
...  
Keyword(s):  
Environmental Monitoring ◽  
High Efficiency ◽  
World Meteorological Organization ◽  
70Th Anniversary ◽  
Technical Level ◽  
Technical Cooperation ◽  
Wide Range

The paper presents the summary and results of long-term and multi-faceted experience of international scientific and technical cooperation of Hydrometeorological Center of Russia in the field of hydrometeorology and environmental monitoring within the framework of WMO programs, which indicates its high efficiency in performing a wide range of works at a high scientific and technical level. Keywords: World Meteorological Organization, major WMO programs, representatives of Hydrometeorological Center of Russia in WMO

Integrated Design and Multi-Objective Optimization of a Single Stage Heat-Pump Turbocompressor

2013 ◽  
Author(s):  
J. Schiffmann
Keyword(s):  
Design Optimization ◽  
High Efficiency ◽  
Integrated Design ◽  
Heat Pumps ◽  
Small Scale ◽  
Multi Objective Optimization ◽  
Design Constraints ◽  
Multi Objective ◽  
Wide Range ◽  
Standard Design

Small scale turbomachines in domestic heat pumps reach high efficiency and provide oil-free solutions which improve heat-exchanger performance and offer major advantages in the design of advanced thermodynamic cycles. An appropriate turbocompressor for domestic air based heat pumps requires the ability to operate on a wide range of inlet pressure, pressure ratios and mass flows, confronting the designer with the necessity to compromise between range and efficiency. Further the design of small-scale direct driven turbomachines is a complex and interdisciplinary task. Textbook design procedures propose to split such systems into subcomponents and to design and optimize each element individually. This common procedure, however, tends to neglect the interactions between the different components leading to suboptimal solutions. The authors propose an approach based on the integrated philosophy for designing and optimizing gas bearing supported, direct driven turbocompressors for applications with challenging requirements with regards to operation range and efficiency. Using previously validated reduced order models for the different components an integrated model of the compressor is implemented and the optimum system found via multi-objective optimization. It is shown that compared to standard design procedure the integrated approach yields an increase of the seasonal compressor efficiency of more than 12 points. Further a design optimization based sensitivity analysis allows to investigate the influence of design constraints determined prior to optimization such as impeller surface roughness, rotor material and impeller force. A relaxation of these constrains yields additional room for improvement. Reduced impeller force improves efficiency due to a smaller thrust bearing mainly, whereas a lighter rotor material improves rotordynamic performance. A hydraulically smoother impeller surface improves the overall efficiency considerably by reducing aerodynamic losses. A combination of the relaxation of the 3 design constraints yields an additional improvement of 6 points compared to the original optimization process. The integrated design and optimization procedure implemented in the case of a complex design problem thus clearly shows its advantages compared to traditional design methods by allowing a truly exhaustive search for optimum solutions throughout the complete design space. It can be used for both design optimization and for design analysis.

scholarly journals Low Power Cusped Field Thruster Developed for the Space-Borne Gravitational Wave Detection Mission in China

2021 ◽  
Vol 11 (14) ◽  
pp. 6549
Author(s):  
Hui Liu ◽  
Ming Zeng ◽  
Xiang Niu ◽  
Hongyan Huang ◽  
Daren Yu
Keyword(s):  
Low Power ◽  
Gravitational Wave ◽  
Attitude Control ◽  
High Efficiency ◽  
Experimental Investigations ◽  
Attitude Control System ◽  
Gravitational Wave Detection ◽  
Wave Detection ◽  
Wide Range ◽  
Institute Of Technology

The microthruster is the crucial device of the drag-free attitude control system, essential for the space-borne gravitational wave detection mission. The cusped field thruster (also called the High Efficiency Multistage Plasma Thruster) becomes one of the candidate thrusters for the mission due to its low complexity and potential long life over a wide range of thrust. However, the prescribed minimum of thrust and thrust noise are considerable obstacles to downscaling works on cusped field thrusters. This article reviews the development of the low power cusped field thruster at the Harbin Institute of Technology since 2012, including the design of prototypes, experimental investigations and simulation studies. Progress has been made on the downscaling of cusped field thrusters, and a new concept of microwave discharge cusped field thruster has been introduced.

scholarly journals Research on the Performance of Solar Aided Power Generation System Based on Annular Fresnel Solar Concentrator

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1579
Author(s):  
Heng Zhang ◽  
Na Wang ◽  
Kai Liang ◽  
Yang Liu ◽  
Haiping Chen
Keyword(s):  
Power Generation ◽  
High Efficiency ◽  
Low Cost ◽  
Economic Index ◽  
Partial Replacement ◽  
Solar Concentrator ◽  
Small Disturbance ◽  
Step Size ◽  
Water Matrix ◽  
Cost Utilization

A solar-aided power generation (SAPG) system effectively promotes the high efficiency and low cost utilization of solar energy. In this paper, the SAPG system is represented by conventional coal-fired units and an annular Fresnel solar concentrator (AFSC) system. The annular Fresnel solar concentrator system is adopted to generate solar steam to replace the extraction steam of the turbine. According to the steam–water matrix equation and improved Flugel formula, the variable conditions simulation and analysis of the thermo-economic index were proposed by Matlab. Furthermore, in order to obtain the range of small disturbance, the method of partial replacement is used, that is, the extraction steam of the turbine is replaced from 0 to 100% with a step size of 20%. In this work, a SAPG system is proposed and its thermo-economic index and small disturbance scope are analyzed. The results show that the SAPG system is energy-saving, and the application scope of small disturbance is related to the quantity of the extraction steam and evaluation index.

Sign in / Sign up

Export Citation Format

Share Document