scholarly journals Using Welding Simulation and Ultrasonic Method to Evaluate Residual Stress in Stainless Steel Welded Plates

2012 ◽  
Author(s):  
Yashar Javadi ◽  
Mohammadreza Hadizadeh Raeisi ◽  
Hamed Salimi Pirzaman ◽  
Mehdi Ahmadi Najafabadi
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Stainless Steel ◽  
Residual Stresses ◽  
Acoustic Waves ◽  
Stress Measurement ◽  
Bulk Material ◽  
Three Dimensional ◽  
Ultrasonic Waves ◽  
Welding Simulation

When a material is under mechanical load, the stresses change the velocity of acoustic waves because of acoustoelastic effect. This property can be employed for stress measurement in the material itself when the stress concerns the surface of the material, or in the bulk material. This technique involves with critically refracted longitudinal waves that propagate parallel to the surface, i. e. LCR waves. This paper presents a three dimensional thermo-mechanical analysis to evaluate welding residual stresses in plate-plate joint of AISI stainless steel 304L. After finite element simulation, the residual stresses were evaluated by LCR ultrasonic waves. This paper introduces a combination of “Finite Element Welding Simulation” and “Ultrasonic Stress Measurement using the LCR Wave” which is called as “FELcr”. The capabilities of FELCR in residual stress measurement are confirmed here. It has been shown that predicted residual stress from three dimensional FE analyses is in reasonable agreement with measured residual stress from LCR method.

scholarly journals Investigation of Clamping Effect on the Welding Residual Stress and Deformation of Monel Plates by Using the Ultrasonic Stress Measurement and Finite Element Method

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
Yashar Javadi
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Acoustic Waves ◽  
Stress Measurement ◽  
Fe Analysis ◽  
Ultrasonic Waves ◽  
Welding Residual Stress ◽  
Longitudinal Residual Stress ◽  
Ultrasonic Stress Measurement

Welding of nickel-based alloys is increasingly used in the industry to manufacture many important components of the marine industries, chemical processing, etc. In this study, a 3D thermomechanical finite element (FE) analysis is employed to evaluate residual stresses and deformations caused by the tungsten inert gas (TIG) welding of Monel 400 (Nickel-Copper alloy) plates. The FE results related to the residual stresses and deformations have been verified by using the hole-drilling stress measurement and common dimensional measurement tools, respectively. Residual stresses analyzed by the FE simulation are then compared with those obtained from ultrasonic stress measurement. The ultrasonic stress measurement is based on acoustoelasticity law, which presents the relation between the acoustic waves and the stress of material. The ultrasonic stress measurement is carried out by using longitudinal critically refracted (LCR) waves which are longitudinal ultrasonic waves propagated parallel to the surface inside the tested material. Two welded plates are experimentally prepared (with and without using clamp) to investigate the clamping effect on the welding residual stress and deformations. By utilizing the FE analysis along with the LCR method, the distribution of longitudinal residual stress could be achieved. It has been concluded that the applied methodologies are enough accurate to distinguish the clamping effect on the welding residual stresses and deformations of Monel plates.

Evaluation of Residual Stresses in Small Diameter Stainless Steel Pipe Welds by Two-Dimensional and Three-Dimensional Finite Element Analyses

2014 ◽  
Author(s):  
Francis H. Ku ◽  
Trevor G. Hicks ◽  
William R. Mabe ◽  
Jason R. Miller
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Stainless Steel ◽  
Residual Stresses ◽  
Three Dimensional ◽  
Steel Pipe ◽  
3D Analysis ◽  
Two Dimensional ◽  
Finite Element Analyses ◽  
Stainless Steel Pipe

Two-dimensional (2D) and three-dimensional (3D) weld-induced residual stress finite element analyses have been performed for 2-inch Schedule 80 Type-304 stainless steel pipe sections joined by a multi-layer segmented-bead pipe weld. The analyses investigate the similarities and differences between the two modeling approaches in terms of residual stresses and axial shrinkage induced by the pipe weld. The 2D analyses are of axisymmetric behavior and evaluate two different pipe end constraints, namely fixed-fixed and fixed-free, while the 3D analysis approximates the non-axisymmetric segmented welding expected in production, with fixed-free pipe end constraints. Based on the results presented, the following conclusions can be drawn. The welding temperature contour results between the 2D and 3D analyses are very similar. Only the 3D analysis is capable of simulating the non-axisymmetric behavior of the segmented welding technique. The 2D analyses yield similar hoop residual stresses to the 3D analysis, and closely capture the maximum and minimum ID surface hoop residual stresses from the 3D analysis. The primary difference in ID surface residual stresses between the 2D fixed-fixed and 2D fixed-free constraints cases is the higher tensile axial stresses in the pipe outside of the weld region. The 2D analyses under-predict the maximum axial residual stress compared to the 3D analysis. The 2D ID surface residual stress results tend to bound the averaged 3D results. 2D axisymmetric modeling tends to significantly under-predict weld shrinkage. Axial weld shrinkage from 3D modeling is of the same magnitude as values measured in the laboratory on a prototypic mockup.

Fast Three-Dimensional Finite Element Analysis of Weld Overlay Application on a Formed Feeder Elbow

2011 ◽  
Author(s):  
Francis H. Ku ◽  
Pete C. Riccardella
Keyword(s):  
Residual Stress ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Residual Stresses ◽  
Nuclear Reactor ◽  
Three Dimensional ◽  
Fe Method ◽  
Element Analysis ◽  
Weld Overlay ◽  
Welding Processes

This paper presents a fast finite element analysis (FEA) model to efficiently predict the residual stresses in a feeder elbow in a CANDU nuclear reactor coolant system throughout the various stages of the manufacturing and welding processes, including elbow forming, Grayloc hub weld, and weld overlay application. The finite element (FE) method employs optimized FEA procedure along with three-dimensional (3-D) elastic-plastic technology and large deformation capability to predict the residual stresses due to the feeder forming and various welding processes. The results demonstrate that the fast FEA method captures the residual stress trends with acceptable accuracy and, hence, provides an efficient and practical tool for performing complicated parametric 3-D weld residual stress studies.

scholarly journals UK Research Programme on Residual Stresses: A Review of Progress

2008 ◽  
Author(s):  
S. K. Bate ◽  
P. Hurrell ◽  
J. A. Francis ◽  
M. Turski
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Stress Measurement ◽  
Experimental Testing ◽  
Research Programme ◽  
Austenitic Steels ◽  
Assessment Procedure ◽  
Engineering Structures ◽  
Modelling Techniques

A long-term UK research programme on residual stresses was launched in 2004. It involves Rolls-Royce plc and Serco Assurance, supported by UK industry and academia. The programme is aimed at progressing the understanding of weld residual stresses and the implementation of finite element simulation and residual stress measurement for assessing the integrity of engineering structures. Following on from this, the intention is then to develop improved guidance on residual stress modelling techniques and then to provide methods and analysis tools for design in order to control and minimise residual stress. The focus of the work to date has been to develop modelling guidelines which can be used by a finite element analyst to predict the residual stresses in austenitic welded components. These guidelines are now drafted and will be incorporated into the next issue of the British Energy R6 defect assessment procedure following peer review. The guidelines have been developed based on the experience that has been attained using various modelling techniques. To support this development, a series of welded mock-ups have been manufactured. The residual stresses in these welds have been measured using various techniques (diffraction and strain relaxation). These measurements are being used to validate the predicted stresses. It is only by corroborating each other that the resulting residual stresses can be confidently used for assessment. Mock-ups are also being used to develop material models for ferritic steel which undergo phase transformations, and to investigate how various weld parameters affect the magnitude and distribution of residual stress. Similarly, mock-ups have been manufactured to investigate the effect of start-stops on residual stresses. The programme is also supported by experimental testing to develop physical and mechanical properties which are required for analysis, i.e. up to melting temperature. Both conventional and miniaturised testing has been used to measure properties in ferritic and austenitic steels. A task has also been undertaken to develop a methodology for providing upper bound residual stress profiles which can be used as an initial estimate of stress for use in structural assessment.

High-Temperature Constitutive Behavior of Austenitic Stainless Steel for Weld Residual Stress Modeling

2012 ◽  
Author(s):  
Dongxiao Qiao ◽  
Wei Zhang ◽  
Zhili Feng
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Stainless Steel ◽  
High Temperature ◽  
Residual Stresses ◽  
Constitutive Rule ◽  
Dissimilar Metal ◽  
Weld Residual Stress ◽  
Dissimilar Metal Weld ◽  
Metal Weld

Weld residual stress is a major driving force for initiation and growth of primary water stress corrosion cracking (PWSCC), which is a critical challenge for weld integrity of reactor pressure vessel nozzles in nuclear industry. Predicting weld residual stresses for the purpose of understanding and mitigating PWSCC requires the knowledge of material constitutive rule especially strain hardening behavior over a wide range of temperatures. Though it is adequate for describing deformation at low temperature, the conventional, rate-independent, elastic-plastic constitutive rule falls short in predicting the strong microstructure-mechanical interaction such as the softening due to recovery (dislocation annihilation and realignment) and recrystallization at elevated temperature in welding. To quantify the extent of softening under temperature and strain conditions relevant to welding, a framework has been developed by combining advanced experimental techniques and finite element modeling. First, physical simulation in a Gleeble testing machine is used to simulate the temperature transients typical of dissimilar metal weld by subjecting round tensile bar shaped specimens to rapid heating and cooling. Second, the digital image correlation (DIC) technique is used to map the non-uniform strain field and extract local strain history needed for accurately determining the true stress vs. true strain curve of softened material. Third, the thermally-mechanically processed specimens are characterized metallographically to correlate the microstructure changes to the measured stress-strain behavior. Finally, a thermal-stress finite element model of three-bar frame is used to study the effect of softening on the predicted weld residual stresses. As a first step toward developing the much-needed, comprehensive material constitutive relation database for dissimilar metal weld, the framework has been applied to study AISI 304L austenitic stainless steel. The extent of softening due to different duration of high-temperature exposure is studied and its influence on final residual stresses is discussed.

UK Research Programme on Residual Stresses: Progress to Date

2007 ◽  
Author(s):  
S. K. Bate ◽  
A. P. Warren ◽  
C. T. Watson ◽  
P. Hurrell ◽  
J. A. Francis
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Stress Measurement ◽  
Research Programme ◽  
Assessment Procedure ◽  
Engineering Structures ◽  
Element Analysis ◽  
Simplifying Assumptions ◽  
Modelling Techniques

A long-term UK research programme on residual stresses was launched in 2004. It involves Rolls-Royce plc and Serco Assurance, and is supported by UK industry and academia. The programme is aimed at progressing the understanding of weld residual stresses and the implementation of finite element simulation and residual stress measurement for assessing the integrity of engineering structures. Following on from this, the intention is then to develop improved guidance on residual stress modelling techniques. In the first two years finite element activities have addressed heat source representation, simplified modelling (e.g. 2D v 3D, bead lumping), material hardening models, high temperature behaviour and phase transformations. It is recognized that simplifying assumptions have to be made in order to reduce the computational run-time and modelling complexity, especially for multi-pass welds. The effects of these assumptions on the determined stresses have been considered by carrying out finite element analyses of welded mock-ups. The welded mock-ups have been developed to provide measured residual stress data which are necessary to validate the modelling techniques that have been developed. These activities have been used to support the development of guidelines on the use finite element analysis to predict residual stresses in welded components. These guidelines will be incorporated in the next issue of the British Energy R6 defect assessment procedure.

Modeling Residual Stresses in Superduplex Stainless Steel Welded Pipes Using the Finite Element Method

2013 ◽  
Vol 758 ◽  
pp. 1-10
Author(s):  
Fabiano Rezende ◽  
Luís Felipe Guimarães de Souza ◽  
Pedro Manuel Calas Lopes Pacheco
Keyword(s):  
Finite Element Method ◽  
Residual Stress ◽  
Finite Element ◽  
Stainless Steel ◽  
Residual Stresses ◽  
Welding Process ◽  
Welding Parameters ◽  
Superduplex Stainless Steel ◽  
Mechanical Components ◽  
Element Method

Welding is a complex process where localized and intensive heat is imposed to a piece promoting mechanical and metallurgical changes. Phenomenological aspects of welding process involve couplings among different physical processes and its description is unusually complex. Basically, three couplings are essential: thermal, phase transformation and mechanical phenomena. Welding processes can generate residual stress due to the thermal gradient imposed to the workpiece in association to geometric restrictions. The presence of tensile residual stresses can be especially dangerous to mechanical components submitted to fatigue loadings. The present work regards on study the residual stress in welded superduplex stainless steel pipes using experimental and a numerical analysis. A parametric nonlinear elastoplastic model based on finite element method is used for the evaluation of residual stress in superduplex steel welding. The developed model takes into account the coupling between mechanical and thermal fields and the temperature dependency of the thermomechanical properties. Thermocouples are used to measure the temperature evolution during welding stages. Instrumented hole drilling technique is used for the evaluation of the residual stress after welding process. Experimental data is used to calibrate the numerical model. The methodology is applied to evaluate the behavior of two-pass girth welding (TIG for root pass and SMAW for finishing) in 4 inch diameter seamless tubes of superduplex stainless steel UNS32750. The result shows a good agreement between numerical experimental results. The proposed methodology can be used in complex geometries as a powerful tool to study and adjust welding parameters to minimize the residual stresses on welded mechanical components.

Experimental characterization and finite element modeling of the residual stresses in laser-assisted mechanical micromachining of Inconel 625

2015 ◽  
Vol 231 (10) ◽  
pp. 1735-1751 ◽  
Author(s):  
Avik Samanta ◽  
Mahesh Teli ◽  
Ramesh Singh
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Cutting Forces ◽  
Laser Heating ◽  
Stress Measurement ◽  
Cutting Speed ◽  
Inconel 625 ◽  
Beam Diameter ◽  
Mechanical Micromachining

Laser-assisted mechanical micromachining offers the ability to machine difficult-to-cut materials, like superalloys and ceramics, more efficiently and economically by laser-induced localized thermal softening prior to cutting. Laser-assisted mechanical micromachining is a micromachining process with localized laser heating which could affect the cutting forces and the machined surface integrity. The residual stresses obtained in the laser-assisted mechanical micromachining process depend on both mechanical loading and the laser heating. This article focuses on the experimental process characterization and prediction of the cutting forces and the residual stresses in a laser-assisted mechanical micromachining–based orthogonal machining of Inconel 625. The results show that the laser assistance reduces the mean cutting forces by ∼25% and enhances the normal compressive residual stress at the surface by ∼50%. Since microscale residual stress measurement is very time-intensive, a coupled-field thermo-mechanical finite element model of laser-assisted mechanical micromachining has been developed to predict the temperature, cutting forces and the residual stresses. The cutting forces and residual stresses’ predictions are in good agreement with the measured values during machining. In addition, parametric simulations have been carried out for laser power, cutting speed, cutting edge radius, rake angle, laser location and laser beam diameter to study their effect on cutting forces and surface residual stresses.

Residual Stress Measurement in a Ceramic-Metallic Graded Material

2002 ◽  
Vol 124 (2) ◽  
pp. 185-191 ◽  
Author(s):  
Michael R. Hill ◽  
Wei-Yan Lin
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Error Analysis ◽  
Residual Stresses ◽  
Stress Measurement ◽  
Pure Titanium ◽  
Titanium Boride ◽  
Residual Stress Measurement ◽  
Graded Material ◽  
Strain Release

This paper presents experimental measurements of the through-thickness distribution of residual stress in a ceramic-metallic functionally graded material (FGM). It further presents an error analysis and optimization of the residual stress measurement technique. Measurements are made in a seven-layered plate with a base of commercially pure titanium and successive layers containing an increasing proportion of titanium-boride, reaching 85% titanium-boride in the final layer. The compliance method is employed to determine residual stress, where a slot is introduced using wire electric-discharge machining and strain release is measured as a function of increasing slot depth. Strain release measurements are used with a back-calculation scheme, based on finite element simulation, to provide residual stresses in the FGM. The analysis is complicated by the variation of material properties in the FGM, but tractable due to the flexibility of the finite element method. The Monte Carlo approach is used for error analysis and a method is described for optimization of the functional form assumed for the residual stresses. The magnitude and variation of the resulting residual stress distributions and several aspects of the error analyses are discussed.

scholarly journals Finite Element Prediction of Residual Stress Distributions in a Multipass Welded Piping Branch Junction

2006 ◽  
Vol 129 (4) ◽  
pp. 601-608 ◽  
Author(s):  
Wei Jiang ◽  
Kadda Yahiaoui
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Three Dimensional ◽  
Pressure Vessels ◽  
Welding Residual Stress ◽  
Stress Distributions ◽  
Multipass Welding ◽  
Hexahedral Elements ◽  
Element Removal

Piping branch junctions and nozzle attachments to main pressure vessels are common engineering components used in the power, oil and gas, and shipbuilding industries amongst others. These components are usually fabricated by multipass welding. The latter process is known to induce residual stresses at the fabrication stage, which can have severe adverse effects on the in-service behavior of such critical components. It is thus desirable if the distributions of residual stresses can be predicted well in advance of welding execution. This paper presents a comprehensive study of three dimensional residual stress distributions in a stainless steel tee branch junction during a multipass welding process. A full three dimensional thermomechanical finite element model has been developed for this purpose. A newly developed meshing technique has been used to model the complex intersection areas of the welded junction with all hexahedral elements. Element removal/reactivate technique has been employed to simulate the deposition of filler material. Material, geometry, and boundary nonlinearities associated with welding were all taken into account. The analysis results are presented in the form of stress distributions circumferentially along the weld line on both run and branch pipes as well as at the run and branch cross sections. In general, this computational model is capable of predicting three dimensional through-thickness welding residual stress, which can be valuable for structural integrity assessments of complex welded geometries.

Sign in / Sign up

Export Citation Format

Share Document