Vibration Analysis of Rectangular Functionally Graded Plate Bonded With PZT5 Sensor/Actuator

2010 ◽  
Author(s):  
M. H. Kargarnovin ◽  
N. S. Viliani
Keyword(s):  
Volume Fraction ◽  
Plate Theory ◽  
Equations Of Motion ◽  
Equation Of Motion ◽  
Functionally Graded ◽  
Bottom Surface ◽  
Feedback Gain ◽  
Laminated Plate ◽  
Functionally Graded Plate ◽  
Sensor Actuator

The vibration of FG plate embedded with PZT5 rectangular patches on the top and/or the bottom surface(s) as actuators/sensors is investigated. Based on the classical laminated plate theory, the governing differential equations of motion are derived under a variable electric charge. The equation of motion for PZT5 patch is obtained and solved. The effect of feedback gain and FGM volume fraction exponent on the plate frequency and its deflection are studied. It is noticed that increasing the feedback gain leads to the reduction of frequency and displacement. Moreover, by increasing the value of the FGM volume fraction exponent the resonant frequency decreases.

Vibration Control of Smart Functionally Graded Plate Bonded With PZT4 Sensor/Actuator Patches

2010 ◽  
Author(s):  
M. H. Kargarnovin ◽  
N. S. Viliani
Keyword(s):  
Volume Fraction ◽  
Plate Theory ◽  
Equations Of Motion ◽  
Equation Of Motion ◽  
Functionally Graded ◽  
Bottom Surface ◽  
Feedback Gain ◽  
Laminated Plate ◽  
Functionally Graded Plate ◽  
Sensor Actuator

The vibration of FG plate embedded with PZT4 rectangular patches on the top and/or the bottom surface(s) as actuators/sensors is investigated. Based on the classical laminated plate theory, the governing differential equations of motion are derived under a variable electric charge. The equation of motion for PZT4 patch is obtained and solved. The effect of feedback gain and FGM volume fraction exponent on the plate frequency and its deflection are studied. It is noticed that increasing the feedback gain leads to the reduction of frequency and displacement. Moreover, by increasing the value of the FGM volume fraction exponent the resonant frequency decreases.

TSDT theory for free vibration of functionally graded plates with various material properties

2021 ◽  
Vol 8 (4) ◽  
pp. 691-704
Author(s):  
M. Janane Allah ◽  
◽  
Y. Belaasilia ◽  
A. Timesli ◽  
A. El Haouzi ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Volume Fraction ◽  
Equations Of Motion ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Third Order ◽  
Implicit Algorithm ◽  
Proposed Model ◽  
Graded Material ◽  
Composite Modeling

In this work, an implicit algorithm is used for analyzing the free dynamic behavior of Functionally Graded Material (FGM) plates. The Third order Shear Deformation Theory (TSDT) is used to develop the proposed model. In this contribution, the formulation is written without any homogenization technique as the rule of mixture. The Hamilton principle is used to establish the resulting equations of motion. For spatial discretization based on Finite Element Method (FEM), a quadratic element with four and eight nodes is adopted using seven degrees of freedom per node. An implicit algorithm is used for solving the obtained problem. To study the accuracy and the performance of the proposed approach, we present comparisons with literature and laminate composite modeling results for vibration natural frequencies. Otherwise, we examine the influence of the exponent of the volume fraction which reacts the plates "P-FGM" and "S-FGM". In addition, we study the influence of the thickness on "E-FGM" plates.

scholarly journals Non-Local Buckling Analysis of Functionally Graded Nanoporous Metal Foam Nanoplates

Coatings ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 389 ◽  
Author(s):  
Yanqing Wang ◽  
Zhiyuan Zhang
Keyword(s):  
Metal Foam ◽  
Plate Theory ◽  
Constitutive Relations ◽  
Equations Of Motion ◽  
Local Buckling ◽  
Functionally Graded ◽  
Small Scale ◽  
Refined Plate Theory ◽  
Nanoporous Metal ◽  
Non Local

In this study, the buckling of functionally graded (FG) nanoporous metal foam nanoplates is investigated by combining the refined plate theory with the non-local elasticity theory. The refined plate theory takes into account transverse shear strains which vary quadratically through the thickness without considering the shear correction factor. Based on Eringen’s non-local differential constitutive relations, the equations of motion are derived from Hamilton’s principle. The analytical solutions for the buckling of FG nanoporous metal foam nanoplates are obtained via Navier’s method. Moreover, the effects of porosity distributions, porosity coefficient, small scale parameter, axial compression ratio, mode number, aspect ratio and length-to-thickness ratio on the buckling loads are discussed. In order to verify the validity of present analysis, the analytical results have been compared with other previous studies.

Chaotic Motion of a Functionally Graded Materials Square Thin Plate

2012 ◽  
Vol 531 ◽  
pp. 593-596
Author(s):  
Shuang Bao Li ◽  
Yu Xin Hao
Keyword(s):  
Thin Plate ◽  
Functionally Graded Materials ◽  
Chaotic Motion ◽  
Plate Theory ◽  
Equations Of Motion ◽  
Functionally Graded ◽  
Third Order ◽  
Graded Materials ◽  
Steady State Heat ◽  
Steady State Heat Transfer

Chaotic motion of a simply supported functionally graded materials (FGM) square thin plate under one-to-two internal resonance is studied in this paper. The FGM plate is subjected to the transversal and in-plane excitations. Material properties are assumed to be temperature-dependent and change continuously throughout the thickness of the plate. The temperature variation is assumed to occur in the thickness direction only and satisfy the steady-state heat transfer equation. Based on the Reddy’s third-order plate theory and Hamilton’s principle, the nonlinear governing equations of motion for the FGM plate are derived by using the Galerkin’s method to describe the transverse oscillation in the first two modes Numerical simulations illustrate that there exist chaotic motion for the FGM rectangular plate.

scholarly journals Optimum response of functionally graded piezoelectric plates in thermal environments

2017 ◽  
Vol 35 (3) ◽  
pp. 606-617 ◽  
Author(s):  
Hossein Nourmohammadi ◽  
Bashir Behjat
Keyword(s):  
Power Law ◽  
Thermal Loading ◽  
Volume Fraction ◽  
Plate Theory ◽  
Poisson Ratio ◽  
Functionally Graded ◽  
Sensors And Actuators ◽  
Thermal Environments ◽  
Functionally Graded Piezoelectric ◽  
Power Law Index

AbstractIn this article, the static response of the functionally graded piezoelectric (FGP) plates with piezoelectric layers (sandwich FGPM) is studied based on the first order shear deformation plate theory. The plate is under mechanical, electrical and thermal loadings and finite element method is employed to obtain the solution of the equation. All mechanical, thermal and piezoelectric properties, except Poisson ratio, obey the power law distribution through the thickness. By solving the governing equation, optimum value of power law index is investigated in each type of loading. The effects of different volume fraction index, layer arrangements, various boundary conditions and different loading types, are studied on the deflection of FGPM plate. It is inferred that, the correlations between the deflection, power law index and layer arrangement are completely different in the mechanical and thermal loading and the optimum value of the power law index should be selected in each case separately. This optimum values can be used as a design criterion to build a reliable sensors and actuators in thermal environments.

A closed form solution for bending/stretching analysis of functionally graded circular plates under asymmetric loading using the Green function

2010 ◽  
Vol 224 (6) ◽  
pp. 1153-1163 ◽  
Author(s):  
A R Saidi ◽  
A Naderi ◽  
E Jomehzadeh
Keyword(s):  
Green Function ◽  
Closed Form ◽  
Volume Fraction ◽  
Plate Theory ◽  
Closed Form Solution ◽  
Form Solution ◽  
Functionally Graded ◽  
Transverse Displacement ◽  
Circular Plates ◽  
Equilibrium Equations

In this article, a closed-form solution for bending/stretching analysis of functionally graded (FG) circular plates under asymmetric loads is presented. It is assumed that the material properties of the FG plate are described by a power function of the thickness variable. The equilibrium equations are derived according to the classical plate theory using the principle of total potential energy. Two new functions are introduced to decouple the governing equilibrium equations. The three highly coupled partial differential equations are then converted into an independent equation in terms of transverse displacement. A closed-form solution for deflection of FG circular plates under arbitrary lateral eccentric concentrated force is obtained by defining a new coordinate system. This solution can be used as a Green function to obtain the closed-form solution of the FG plate under arbitrary loadings. Also, the solution is employed to solve some different asymmetric problems. Finally, the stress and displacement components are obtained exactly for each problem and the effect of volume fraction is also studied.

Dynamic Response of Cantilever FGM Cylindrical Shell

2011 ◽  
Vol 130-134 ◽  
pp. 3986-3993 ◽  
Author(s):  
Yu Xin Hao ◽  
Wei Zhang ◽  
L. Yang ◽  
J.H. Wang
Keyword(s):  
Cylindrical Shell ◽  
Volume Fraction ◽  
Nonlinear Oscillations ◽  
Equations Of Motion ◽  
Functionally Graded ◽  
Governing Equations ◽  
Temperature Dependent ◽  
Graded Materials ◽  
First Order ◽  
Two Degree Of Freedom

An analysis on the nonlinear dynamics of a cantilever functionally graded materials (FGM) cylindrical shell subjected to the transversal excitation is presented in thermal environment.Material properties are assumed to be temperature-dependent. Based on the Reddy’s first-order shell theory,the nonlinear governing equations of motion for the FGM cylindrical shell are derived using the Hamilton’s principle. The Galerkin’s method is utilized to discretize the governing partial equations to a two-degree-of-freedom nonlinear system including the quadratic and cubic nonlinear terms under combined external excitations. It is our desirable to choose a suitable mode function to satisfy the first two modes of transverse nonlinear oscillations and the boundary conditions for the cantilever FGM cylindrical shell. Numerical method is used to find that in the case of non-internal resonance the transverse amplitude are decreased by increasing the volume fraction index N.

Free Vibration and Buckling Analysis of Functionally Graded Plates Resting on Elastic Foundation Using Higher Order Theory

2018 ◽  
Vol 18 (04) ◽  
pp. 1850049 ◽  
Author(s):  
Smita Parida ◽  
Sukesh Chandra Mohanty
Keyword(s):  
Free Vibration ◽  
Shear Deformation ◽  
Elastic Foundation ◽  
Volume Fraction ◽  
Plate Theory ◽  
Higher Order ◽  
Buckling Analysis ◽  
Functionally Graded ◽  
Transverse Displacement ◽  
Pasternak Elastic Foundation

This paper deals with the free vibration and buckling analysis of functionally graded material (FGM) plates, resting on the Winkler–Pasternak elastic foundation. The higher order shear deformation plate theory (HSPT) is adopted for the realistic variation of transverse displacement through the thickness, using the power law distribution to describe the variation of the material properties. Both the effects of shear deformation and rotary inertia are considered. In the present model, the plate is discretised into [Formula: see text] eight noded serendipity quadratic elements with seven nodal degrees of freedom (DOFs). The validation study is carried out by comparing the calculated values with those given in the literature. The effects of various parameters like the Winkler and Pasternak modulus coefficients, volume fraction index, aspect ratio, thickness ratio and different boundary conditions on the behaviour of the FGM plates are studied.

Free Vibration Responses of Functionally Graded Spherical Shell Panels Using Finite Element Method

2013 ◽  
Author(s):  
Vishesh Ranjan Kar ◽  
Subrata Kumar Panda
Keyword(s):  
Mathematical Model ◽  
Free Vibration ◽  
Spherical Shell ◽  
Volume Fraction ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Bottom Surface ◽  
Power Law Distribution ◽  
Vibration Responses ◽  
Support Conditions

Free vibration responses of functionally graded spherical shell panels are investigated in the present article. A general mathematical model is developed based on higher order shear deformation theory mid-plane kinematics. The effective material properties are graded in the thickness direction according to a power-law distribution and it varies continuously from metal (bottom surface) to ceramic (top surface). The model is discretized using a nine noded quadrilateral Lagrangian element. A convergence test has been done with different mesh refinement and compared with the available published results. In addition to that the present study includes an ANSYS model check with the developed mathematical model to show the efficacy. New results are computed for different parameters such as volume fraction, thickness ratio, curvature ratio and support conditions which indicates the effect of parametric study on non-dimensional frequency parameters.

Sign in / Sign up

Export Citation Format

Share Document