Centrifugal Water Pump Driven With a DC Motor Powered by an Emulator of MK5-E Proton Exchange Membrane Fuel Cell Stacks

Volume 1 ◽  
2004 ◽  
Author(s):  
Fabio Lo Mastro ◽  
Gandolfo Blando
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Dc Motor ◽  
Proton Exchange ◽  
Water Pump ◽  
Temperature Level ◽  
Good Reliability ◽  
Dc Motors ◽  
The University ◽  
Exchange Membrane

Direct Current (DC) motors can be directly powered by Proton Exchange Membrane Fuel Cell (PEMFC) Stacks, to obtain plants with little maintenance and good reliability. To obtain a suitable efficiency working plant, it’s necessary to correctly match the load in order to operate in proximity to the best power line of the FC stacks generator. Otherwise by a proper field current regulation of a separately excited DC motor directly powered by a FC stacks generator, it is possible to extract from the generator itself the correct power for every temperature level. The present interest for this problem has advised the Authors to perform an experimental investigation, whose results are reported in this paper, about a centrifugal water pump powered as above c/o the machines laboratory of the Mechanical Department of the University of Palermo.

Highly proton conductive membranes based on carboxylated cellulose nanofibres and their performance in proton exchange membrane fuel cells

2019 ◽  
Author(s):  
Valentina Guccini ◽  
Annika Carlson ◽  
Shun Yu ◽  
Göran Lindbergh ◽  
Rakel Wreland Lindström ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Surface Charge ◽  
Proton Exchange Membrane ◽  
Membrane Surface ◽  
Proton Exchange ◽  
Membrane Thickness ◽  
Fuel Cell Performance ◽  
Cellulose Nanofibres ◽  
Exchange Membrane

The performance of thin carboxylated cellulose nanofiber-based (CNF) membranes as proton exchange membranes in fuel cells has been measured in-situ as a function of CNF surface charge density (600 and 1550 µmol g<sup>-1</sup>), counterion (H<sup>+</sup>or Na<sup>+</sup>), membrane thickness and fuel cell relative humidity (RH 55 to 95 %). The structural evolution of the membranes as a function of RH as measured by Small Angle X-ray scattering shows that water channels are formed only above 75 % RH. The amount of absorbed water was shown to depend on the membrane surface charge and counter ions (Na<sup>+</sup>or H<sup>+</sup>). The high affinity of CNF for water and the high aspect ratio of the nanofibers, together with a well-defined and homogenous membrane structure, ensures a proton conductivity exceeding 1 mS cm<sup>-1</sup>at 30 °C between 65 and 95 % RH. This is two orders of magnitude larger than previously reported values for cellulose materials and only one order of magnitude lower than Nafion 212. Moreover, the CNF membranes are characterized by a lower hydrogen crossover than Nafion, despite being ≈ 30 % thinner. Thanks to their environmental compatibility and promising fuel cell performance the CNF membranes should be considered for new generation proton exchange membrane fuel cells.<br>

Latest Trends and Challenges In Proton Exchange Membrane Fuel Cell (PEMFC)

2017 ◽  
Vol 10 (1) ◽  
pp. 96-105 ◽  
Author(s):  
Mohammed Jourdani ◽  
Hamid Mounir ◽  
Abdellatif El Marjani
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Total Cost ◽  
Cell Efficiency ◽  
Technical Advances ◽  
Exchange Membrane

Background: During last few years, the proton exchange membrane fuel cells (PEMFCs) underwent a huge development. Method: The different contributions to the design, the material of all components and the efficiencies are analyzed. Result: Many technical advances are introduced to increase the PEMFC fuel cell efficiency and lifetime for transportation, stationary and portable utilization. Conclusion: By the last years, the total cost of this system is decreasing. However, the remaining challenges that need to be overcome mean that it will be several years before full commercialization can take place.This paper gives an overview of the recent advancements in the development of Proton Exchange Membrane Fuel cells and remaining challenges of PEMFC.

Thermodynamic, exergetic, and thermoeconomic analyses of a 1-kW proton exchange membrane fuel cell system fueled by natural gas

Energy ◽  
2020 ◽  
pp. 119362
Author(s):  
Seok-Ho Seo ◽  
Si-Doek Oh ◽  
Jinwon Park ◽  
Hwanyeong Oh ◽  
Yoon-Young Choi ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
Fuel Cell System ◽  
Exchange Membrane
Sign in / Sign up

Export Citation Format

Share Document