An Experimental Study on the Performance and Emission Characteristics of Jatropha Biodiesel Fuelled CI Engine

2009 ◽  
Author(s):  
Samiddha Palit ◽  
Bijan Kumar Mandal ◽  
Sudip Ghosh ◽  
Arup Jyoti Bhowal
Keyword(s):  
Diesel Fuel ◽  
Combustion Process ◽  
Maximum Efficiency ◽  
Emission Characteristics ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Biodiesel Blends ◽  
Full Load ◽  
Fuel Blends ◽  
Exhaust Gas Temperature

A twin cylinder, constant speed, direct injection CI (diesel) engine was run on jatropha biodiesel and diesel fuel blends. The engine was directly coupled to a hydraulic dynamometer whose load was varied by adjusting load wheel on the top of the engine. The test results were recorded for pure diesel, pure biodiesel (B100) and different diesel/biodiesel blends. The performance characteristics shows that brake specific fuel consumption (BSFC) decreases rapidly with increase of load up to 4.0 to 4.5 kW (55% to 62% of full load) and then decreases slowly. This result also indicates that BSFC increases when the percentage of biodiesel in the blends is increased. Brake thermal efficiency also increases from high biodiesel blends to pure diesel fuel. Each fuel curve shows maximum efficiency reaches at the load range of 5.0 to 5.5 kW (68% to 75% of full load). Pure diesel has maximum efficiency 29.6%, where as pure biodiesel has maximum efficiency of 21.2%. The exhaust gas temperature increases with the load for all fuel blends. Pure biodiesel gives higher exhaust temperature (320°C) than pure diesel (260°C). The exhaust gas temperature increases with the higher percentage of biodiesel blends in different fuel blends. The probable reason for that is biodiesel contains oxygen atoms which make the combustion process complete and hence more energy is released. In respect of emission characteristics, carbon mono-oxide (CO) and hydrocarbon emissions are improved with the addition of biodiesel to diesel. But these emissions increase with the increase of load for all fuel blends. NOx emission increases with load as well as percentage of blending of biodiesel in the diesel fuel.

Engine Performance with Diesel-Biodiesel Blends Fuel and Emission Characteristics

2020 ◽  
Vol 38 (5A) ◽  
pp. 779-788
Author(s):  
Marwa N. Kareem ◽  
Adel M. Salih
Keyword(s):  
Sulfur Content ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Esterification Reaction ◽  
Biodiesel Fuel ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Biodiesel Blends ◽  
Fuel Blends ◽  
Hc Emissions

In this study, the sunflowers oil was utilized as for producing biodiesel via a chemical operation, which is called trans-esterification reaction. Iraqi diesel fuel suffers from high sulfur content, which makes it one of the worst fuels in the world. This study is an attempt to improve the fuel specifications by reducing the sulfur content of the addition of biodiesel fuel to diesel where this fuel is free of sulfur and has a thermal energy that approaches to diesel.20%, 30% and 50% of Biodiesel fuel were added to the conventional diesel. Performance tests and pollutants of a four-stroke single-cylinder diesel engine were performed. The results indicated that the brake thermal efficiency a decreased by (4%, 16%, and 22%) for the B20, B30 and B50, respectively. The increase in specific fuel consumption was (60%, 33%, and 11%) for the B50, B30, and B20 fuels, respectively for the used fuel blends compared to neat diesel fuel. The engine exhaust gas emissions measures manifested a decreased of CO and HC were CO decreased by (13%), (39%) and (52%), and the HC emissions were lower by (6.3%), (32%), and (46%) for B20, B30 and B50 respectively, compared to diesel fuel. The reduction of exhaust gas temperature was (7%), (14%), and (32%) for B20, B30 and B50 respectively. The NOx emission increased with the increase in biodiesel blends ratio. For B50, the raise was (29.5%) in comparison with diesel fuel while for B30 and B20, the raise in the emissions of NOx was (18%) and...

scholarly journals Investigations on Performance and Emission Characteristics of Diesel Engine with Biodiesel (Jatropha Oil) and Its Blends

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Amar Pandhare ◽  
Atul Padalkar
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Brake Thermal Efficiency ◽  
Biodiesel Blends ◽  
Performance And Emission ◽  
Exhaust Gas Temperature ◽  
Load Conditions

This paper presents the performance of biodiesel blends in a single-cylinder water-cooled diesel engine. All experiments were carried out at constant speed 1500 rpm and the biodiesel blends were varied from B10 to B100. The engine was equipped with variable compressions ratio (VCR) mechanism. For 100% Jatropha biodiesel, the maximum fuel consumption was 15% higher than that of diesel fuel. The brake thermal efficiency for biodiesel and its blends was found to be slightly higher than that of diesel at various load conditions. The increase in specific fuel consumption ranged from 2.75% to 15% for B10 to B100 fuels. The exhaust gas temperature increased with increased biodiesel blend. The highest exhaust gas temperature observed was 430°C with biodiesel for load conditions 1.5 kW, 2.5 kW, and 3.5 kW, where as for diesel the maximum exhaust gas temperature was 440°C. The CO2emission from the biodiesel fuelled engine was higher by 25% than diesel fuel at full load. The CO emissions were lower with Jatropha by 15%, 13%, and 13% at 1.5 kW, 2.5 kW, and 3.5 kW load conditions, respectively. TheNOxemissions were higher by 16%, 19%, and 20% at 1.5 kW, 2.5 kW, and 3.5 kW than that of the diesel, respectively.

scholarly journals THE EFFECT OF ISO‐BUTANOL‐DIESEL BLENDS ON ENGINE PERFORMANCE

Transport ◽  
2008 ◽  
Vol 23 (4) ◽  
pp. 306-310 ◽  
Author(s):  
Mohammad Ibrahim Al-Hasan ◽  
Muntaser Al-Momany
Keyword(s):  
Diesel Fuel ◽  
Engine Performance ◽  
Exhaust Gas ◽  
Performance Parameters ◽  
Gas Temperature ◽  
Brake Thermal Efficiency ◽  
Fuel Blends ◽  
Ci Engine ◽  
Exhaust Gas Temperature ◽  
Better Than

The effect of iso‐butanol addition to diesel fuel on engine performance parameters has been experimentally investigated. The used engine was a single cylinder four stroke CI engine Type Lister 1–8. The tests were performed at engine speed that ranges from 375 to 625 with an increment of 42 rpm at different loads and with 10, 20, 30 and 40% v/v iso‐butanol‐diesel fuel blends. The overall engine performance parameters measured included air‐fuel ratio (AFR), exhaust gas temperature, brake power (Bp ), brake specific fuel consumption (bsfc) and brake thermal efficiency (η th ). The experimental results show that AFR, exhaust gas temperature, (Bp ) and (ηbth ) decreased and bsfc increased with iso‐butanol addition compared to net diesel fuel. Also, the obtained results indicate that the engine performance parameters when using up to 30% iso‐butanol in fuel blends are better than that of 40%.

Influence of Nano-Particle Additives on Bio-Diesel-Fuelled CI Engines

2021 ◽  
pp. 1424-1443
Author(s):  
Tamilvanan A. ◽  
K. Balamurugan ◽  
T. Mohanraj ◽  
P. Selvakumar ◽  
B. Ashok ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
High Surface ◽  
High Surface Area ◽  
Combustion Process ◽  
Biodiesel Fuel ◽  
Emission Characteristics ◽  
Operating Pressure ◽  
Transfer Rates ◽  
Fuel Blends ◽  
Ci Engine

Biodiesel is proven to be the best substitute for petroleum-based conventional diesel fuel in existing engines with or without minor engine modifications. The performance characteristics of biodiesel as a fuel in CI engine are slightly lower than that of diesel fuel. The emission characteristics of biodiesel are better than diesel fuel except NOX emission. The thermo-physical properties of biodiesel are improved by suspending the nano metal particles in the biodiesel, which make them an observable choice for the use of nanoparticles-added fuels in CI engine. High surface area of nanoparticles that promotes higher operating pressure and heat transfer rates that further quicken the combustion process by providing better oxidation. Thus, it has been inferred that addition of nanoparticles as an additive to biodiesel fuel blends in diesel engines and its effects on performance, combustion, and emission characteristics are discussed in this chapter.

INVESTIGATION OF THE EFFECTS OF BIODIESEL-DIESEL FUEL BLENDS ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A DIESEL ENGINE

2016 ◽  
Vol 78 (6) ◽  
Author(s):  
Alireza Shirneshan ◽  
Amin Nedayali
Keyword(s):  
Diesel Fuel ◽  
Waste Cooking Oil ◽  
Emission Characteristics ◽  
Gas Temperature ◽  
Power Generator ◽  
Power Generators ◽  
Brake Torque ◽  
Performance And Emission ◽  
Fuel Blends ◽  
Brake Power

The growing demand of diesel power generators in Iran has led to air pollution. Hence, it is necessary to ascertain the level of performance and emissions of the diesel power generators fueled with biofuels. For the first time, in this study, the effect of biodiesel from waste cooking oil and diesel fuel blends (B0, B20, B50, B80 and B100) on the performance (brake power, brake torque, BSFC, brake thermal efficiency and exhaust gas temperature) and emission characteristics (CO and NOx) of a diesel power generator model CAT3412 was investigated. The experiments were conducted at rated engine speed 1530 rpm and various engine loads (25%, 50%, 75% and 100%). The results of the study showed an increase in brake power, brake torque, BTE and NOx emission and a reduction trend in BSFC and CO emission at higher engine loads for all the biodiesel-diesel blends. In addition, the research results indicated that B20 and B50 fuel blends in terms of performance emission characteristics could be recognized as the potential candidates to be certificated for usage in the diesel power generator.

Influence of Nano-Particle Additives on Bio-Diesel-Fuelled CI Engines

2020 ◽  
pp. 85-104 ◽  
Author(s):  
Tamilvanan A. ◽  
K. Balamurugan ◽  
T. Mohanraj ◽  
P. Selvakumar ◽  
B. Ashok ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
High Surface ◽  
High Surface Area ◽  
Combustion Process ◽  
Biodiesel Fuel ◽  
Emission Characteristics ◽  
Operating Pressure ◽  
Transfer Rates ◽  
Fuel Blends ◽  
Ci Engine

Biodiesel is proven to be the best substitute for petroleum-based conventional diesel fuel in existing engines with or without minor engine modifications. The performance characteristics of biodiesel as a fuel in CI engine are slightly lower than that of diesel fuel. The emission characteristics of biodiesel are better than diesel fuel except NOX emission. The thermo-physical properties of biodiesel are improved by suspending the nano metal particles in the biodiesel, which make them an observable choice for the use of nanoparticles-added fuels in CI engine. High surface area of nanoparticles that promotes higher operating pressure and heat transfer rates that further quicken the combustion process by providing better oxidation. Thus, it has been inferred that addition of nanoparticles as an additive to biodiesel fuel blends in diesel engines and its effects on performance, combustion, and emission characteristics are discussed in this chapter.

scholarly journals Engine performance and exhaust emissions of Garcinia gummi-gutta based biodiesel–diesel and ethanol blends

2021 ◽  
Vol 3 (5) ◽  
Author(s):  
B. S. Ajith ◽  
M. C. Math ◽  
G. C. Manjunath Patel ◽  
Mahesh B. Parappagoudar
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fuel Properties ◽  
Biodiesel Production ◽  
Emission Characteristics ◽  
Biodiesel Blends ◽  
Performance And Emission ◽  
Full Load ◽  
Ethanol Blends ◽  
Engine Condition

AbstractThe use of abundantly available Garcinia gummi-gutta seeds grown at forest lands and ethanol a by-product of sugar industries has led to resource conservation and their use as alternate fuel to diesel engines for pollution reduction. Garcinia gummi-gutta (GGG) oil-based methyl esters blended with 20% ethanol and diesel fuel composed of six fuel samples (D100, B20E20, B30E20, B40E20, B100E20 and B100) are tested at different engine loads (0%, 20%, 40%, 80% and 100%) for their practical usefulness in diesel engine. Six fuel samples are tested for fuel properties. Biodiesel–diesel–ethanol blends showed approximately closer fuel properties to standard diesel fuel. Tests are carried out experimentally to know their performance and emission characteristics of six test samples fuelled in diesel engine varied subjected to different loads. Brake specific fuel consumption for all biodiesel blends is slightly higher for diesel fuel and its proportion decreases with increase in engine load. At full load engine condition, the brake thermal efficiency (BTE) for diesel fuel is 26.25%, and for biodiesel blends vary in the ranges of 22.5 to 25.2%. Compared to diesel fuel there is a reduction in 32.56% of carbon monoxide (CO) emission and 35.71% of hydrocarbon (HC) emission for biodiesel fuel (B100E20). For all biodiesel blended fuels tested at all engine loads, the oxides of nitrogen (NOx) emissions are marginally higher than diesel fuel. At full load engine condition, B100E20 (100% diesel and 20% ethanol) reduces CO emissions by 6.45%, HC emissions by 6.64%, and increases BTE by 0.8%, compared to neat biodiesel (B100). GGG based biodiesel blended with ethanol resulted with better fuel properties, performance and emission characteristics to that of diesel fuel. Garcinia gummi-gutta seed yields 45% of oil with a high conversion ratio to biodiesel of 1:0.96, which help the industry for biodiesel production in large scale at reduced cost.

Performance and Emissions of Jatropha-Palm Blended Biodiesel

2013 ◽  
Vol 393 ◽  
pp. 344-349 ◽  
Author(s):  
Syarifah Yunus ◽  
Amirul Abd Rashid ◽  
Syazuan Abdul Latip ◽  
Nik Rosli Abdullah ◽  
Rizalman Mamat ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Vertical Cylinder ◽  
Biodiesel Fuel ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Brake Thermal Efficiency ◽  
Fuel Sample ◽  
Performance And Emissions ◽  
Exhaust Gas Temperature ◽  
Load Conditions

This paper deals with performances and emissions of Jatropha-Palm blended biodiesel as fuel for 4-stroke single vertical cylinder diesel engine. Five fuel samples were tested; i) Diesel fuel supplied by Petronas (PDF); ii) 5% of blended Jatropha-Palm biodiesel and 95% Diesel fuel (B5JPB); iii) 10% of blended Jatropha-Palm biodiesel and 90% Diesel fuel (B10JPB); iv) 15% of blended Jatropha-Palm biodiesel and 85% Diesel fuel (B15JPB); and v) 20% of blended Jatropha-Palm biodiesel and 80% Diesel fuel (B20JPB). Engine performances (specific fuel consumption, brake thermal efficiency) and emissions (exhaust gas temperature and Nox emission) were analyzed and have been discussed in this study. All tests were carried out at varied load conditions which were 0.13, 0.15, 0.17, 0.19 and 0.21 kW. The results revealed that B10JPB blended showed better engine performances compared to its other blends and comparable performances compared to PDF. Comparable Nox emitted of all Jatropha-Palm fuel blended biodiesel fuel sample has been demonstrated to those PDF.

scholarly journals Experimental investigation of V-gutter flameholders

2017 ◽  
Vol 21 (2) ◽  
pp. 1011-1019 ◽  
Author(s):  
Dias Umyshev ◽  
Abay Dostiyarov ◽  
Musagul Tumanov ◽  
Quiwang Wang
Keyword(s):  
Bluff Body ◽  
Combustion Process ◽  
Combustion Efficiency ◽  
Bluff Bodies ◽  
Nox Emissions ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Flame Holder ◽  
Efficiency Increase ◽  
Exhaust Gas Temperature

Combustion characteristics and NOx emissions of propane and air mixture in a channel with a bluff body were investigated experimentally. Effects of the angle and type of the flameholder on the NOx emissions, blow-off limit, combustion efficiency, and exhaust gas temperature were examined. The results show that the NOx emissions are dependent on flameholder type and angle. Also it was observed that the perforated V-gutters considerably increases the blow-off performance. Moreover, the blow-off limit decreases as the geometrical size of flame-holder is increased. In addition, the combustion efficiency increase first and then decrease with the increase of the angle. The physics of the combustion process behind V-gutter flameholdes has been discussed. On the basis of experiment authors presented a modified version of the formula for calculation of lean blow-off limits when using bluff bodies, such as V-gutter flameholders.

Sign in / Sign up

Export Citation Format

Share Document