Exergy Analysis of an Indirectly-Fired Combined Cycle Power Generation System

2008 ◽  
Author(s):  
Kin F. Chui ◽  
Nirmal V. Gnanapragasam ◽  
Bale V. Reddy ◽  
Ramesh C. Prasad
Keyword(s):  
Natural Gas ◽  
Circulating Fluidized Bed ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Exergy Destruction ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Firing Mode ◽  
Fluidized Bed Combustor

A natural gas fired combined cycle power plant with indirectly-fired heating for additional work output is investigated in the current work. The mass flow rate of coal for the indirect firing mode in circulating fluidized bed combustor is estimated based on fixed natural gas input to the topping combustor. The effects of pressure ratio, gas turbine inlet temperature, inlet temperature to the topping combustor on the exergetic performance of the combined cycle configuration are analysed. The use of coal in indirect-firing mode reduces with increase in turbine inlet temperature due to increase in the use of natural gas. The exergetic efficiency increases with pressure ratio up to the optimum pressure and it also increase with gas turbine inlet temperature. The exergy destruction is highest for the circulating fluidized bed combustor (CFBC) followed by the topping combustor. The analyses show that the indirectly fired mode of the combined cycle offers better performance but with higher exergy destruction and the opportunity for additional net work output by using solid fuels (coal in this case) in existing natural gas based power plant is realized.

Proposal of Innovative Gas Turbine Combined Cycle Power Generation System

2004 ◽  
Author(s):  
Hideto Moritsuka
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Thermal Efficiency ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Generation System ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Power Generation System

In order to estimate the possibility to improve thermal efficiency of power generation use gas turbine combined cycle power generation system, benefits of employing the advanced gas turbine technologies proposed here have been made clear based on the recently developed 1500C-class steam cooling gas turbine and 1300C-class reheat cycle gas turbine combined cycle power generation systems. In addition, methane reforming cooling method and NO reducing catalytic reheater are proposed. Based on these findings, the Maximized efficiency Optimized Reheat cycle Innovative Gas Turbine Combined cycle (MORITC) Power Generation System with the most effective combination of advanced technologies and the new devices have been proposed. In case of the proposed reheat cycle gas turbine with pressure ratio being 55, the high pressure turbine inlet temperature being 1700C, the low pressure turbine inlet temperature being 800C, combined with the ultra super critical pressure, double reheat type heat recovery Rankine cycle, the thermal efficiency of combined cycle are expected approximately 66.7% (LHV, generator end).

Thermodynamics Analysis of a Combined Cycle Power Plant

2007 ◽  
Author(s):  
Feliciano Pava´n ◽  
Marco Romo ◽  
Juan Prince
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Work Output ◽  
Turbine Inlet Temperature ◽  
Combined Cycle Power Plant ◽  
Turbine Inlet ◽  
Combined Cycle Plant

The present paper is a thermodynamics analysis, i.e. both energy and exergy analyses for a natural gas based combined cycle power plant. The analysis was performed for an existing 240 MW plant, where the steam cycle reduces the irreversibilities during heat transfer from gas to water/steam. The effect of operating variables such as pressure ratio, gas turbine inlet temperature on the performance of combined cycle power plant has been investigated. The pressure ratio and maximum temperature (gas turbine inlet temperature) are identified as the dominant parameters having impact on the combined cycle plant performance. The work output of the topping cycle is found to increase with pressure ratio, while for the bottoming cycle it decreases. However, for the same gas turbine inlet temperature the overall work output of the combined cycle plant increases up to a certain pressure ratio, and thereafter not much increase is observed. The exergy losses of the individual components in the plant are evaluated based on second law of thermodynamics. The present results form a basis on which further work can be conducted to improve the performance of these units.

scholarly journals Thermodynamical Optimization of a Combined Cycle Plant Performance

1994 ◽  
Author(s):  
K. Sarabchi ◽  
G. T. Polley
Keyword(s):  
Steam Turbine ◽  
Gas Turbine ◽  
Performance Optimization ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Plant Performance ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Recovery Boiler

Computer modelling of Performance optimization was done to examine the effect of key operating variables like compressor pressure ratio, turbine inlet temperature, and recovery boiler pressure on performance parameters of a simple combined cycle and comparison was made to a simple gas turbine cycle. Both thermal efficiency and specific net work were examined as pressure ratio and recovery boiler pressure were varied for each turbine inlet temperature. Also careful consideration was given to admissible values of stack gas temperature, steam turbine outlet dryness fraction, and steam turbine outlet dryness fraction, and steam turbine inlet temperature. Specifically, it was shown that when we treat a combined cycle as an integrated system, efficiency optimization entails a pressure ratio below that suitable for simple gas turbine plant.

Combined First and Second-Law Analysis of Gas Turbine Cogeneration System With Inlet Air Cooling and Evaporative Aftercooling of the Compressor Discharge

2007 ◽  
Vol 129 (4) ◽  
pp. 1004-1011 ◽  
Author(s):  
A. Khaliq ◽  
K. Choudhary
Keyword(s):  
Relative Humidity ◽  
Gas Turbine ◽  
Pressure Ratio ◽  
Second Law ◽  
Inlet Temperature ◽  
Air Cooling ◽  
Exergy Destruction ◽  
Turbine Inlet Temperature ◽  
Ambient Relative Humidity ◽  
Turbine Inlet

A conceptual gas turbine based cogeneration cycle with compressor inlet air cooling and evaporative aftercooling of the compressor discharge is proposed to increase the cycle performance significantly and render it practically insensitive to seasonal temperature fluctuations. Combined first and second-law approach is applied for a cogeneration system having intercooled reheat regeneration in a gas turbine as well as inlet air cooling and evaporative aftercooling of the compressor discharge. Computational analysis is performed to investigate the effects of the overall pressure ratio rp, turbine inlet temperature (TIT), and ambient relative humidity φ on the exergy destruction in each component, first-law efficiency, power-to-heat ratio, and second-law efficiency of the cycle. Thermodynamic analysis indicates that exergy destruction in various components of the cogeneration cycle is significantly affected by overall pressure ratio and turbine inlet temperature, and not at all affected by the ambient relative humidity. It also indicates that the maximum exergy is destroyed during the combustion process, which represents over 60% of the total exergy destruction in the overall system. The first-law efficiency, power-to-heat ratio, and second-law efficiency of the cycle significantly vary with the change in the overall pressure ratio and turbine inlet temperature, but the change in relative humidity shows small variations in these parameters. Results clearly show that performance evaluation based on first-law analysis alone is not adequate, and hence, more meaningful evaluation must include second-law analysis. Decision makers should find the methodology contained in this paper useful in the comparison and selection of advanced combined heat and power systems.

Expanding Fuel Flexibility in MHPS’ Dry Low NOx Combustor

2018 ◽  
Author(s):  
Katsuyoshi Tada ◽  
Kei Inoue ◽  
Tomo Kawakami ◽  
Keijiro Saitoh ◽  
Satoshi Tanimura
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Environmental Conservation ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Social Perspectives ◽  
Turbine Inlet ◽  
Fuel Flexibility

Gas-turbine combined-cycle (GTCC) power generation is clean and efficient, and its demand will increase in the future from economic and social perspectives. Raising turbine inlet temperature is an effective way to increase combined cycle efficiency and contributes to global environmental conservation by reducing CO2 emissions and preventing global warming. However, increasing turbine inlet temperature can lead to the increase of NOx emissions, depletion of the ozone layer and generation of photochemical smog. To deal with this issue, MHPS (MITSUBISHI HITACHI POWER SYSTEMS) and MHI (MITSUBISHI HEAVY INDUSTRIES) have developed Dry Low NOx (DLN) combustion techniques for high temperature gas turbines. In addition, fuel flexibility is one of the most important features for DLN combustors to meet the requirement of the gas turbine market. MHPS and MHI have demonstrated DLN combustor fuel flexibility with natural gas (NG) fuels that have a large Wobbe Index variation, a Hydrogen-NG mixture, and crude oils.

scholarly journals Performance Analysis of the Supercritical Carbon Dioxide Re-compression Brayton Cycle

2020 ◽  
Vol 10 (3) ◽  
pp. 1129 ◽  
Author(s):  
Mohammad Saad Salim ◽  
Muhammad Saeed ◽  
Man-Hoe Kim
Keyword(s):  
Carbon Dioxide ◽  
Performance Analysis ◽  
Supercritical Carbon Dioxide ◽  
Mass Fraction ◽  
Inlet Temperature ◽  
Brayton Cycle ◽  
Exergy Destruction ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Compressor Inlet

This paper presents performance analysis results on supercritical carbon dioxide ( s C O 2 ) re-compression Brayton cycle. Monthly exergy destruction analysis was conducted to find the effects of different ambient and water temperatures on the performance of the system. The results reveal that the gas cooler is the major source of exergy destruction in the system. The total exergy destruction has the lowest value of 390.1   kW when the compressor inlet temperature is near the critical point (at 35 °C) and the compressor outlet pressure is comparatively low ( 24   MPa ). The optimum mass fraction (x) and efficiency of the cycle increase with turbine inlet temperature. The highest efficiency of 49% is obtained at the mass fraction of x = 0.74 and turbine inlet temperature of 700 °C. For predicting the cost of the system, the total heat transfer area coefficient ( U A T o t a l ) and size parameter (SP) are used. The U A T o t a l value has the maximum for the split mass fraction of 0.74 corresponding to the maximum value of thermal efficiency. The SP value for the turbine is 0.212 dm at the turbine inlet temperature of 700 °C and it increases with increasing turbine inlet temperature. However the SP values of the main compressor and re-compressor increase with increasing compressor inlet temperature.

scholarly journals Study on effective parameter of the triple-pressure reheat combined cycle performance

2013 ◽  
Vol 17 (2) ◽  
pp. 497-508 ◽  
Author(s):  
Thamir Ibrahim ◽  
M.M. Rahman
Keyword(s):  
Power Plant ◽  
Ambient Temperature ◽  
Compression Ratio ◽  
Combined Cycle ◽  
Total Power ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Turbine Inlet ◽  
Overall Performance ◽  
Overall Efficiency

The thermodynamic analyses of the triple-pressure reheat combined cycle gas turbines with duct burner are presented and discussed in this paper. The overall performance of a combined cycle gas turbine power plant is influenced by the ambient temperature, compression ratio and turbine inlet temperature. These parameters affect the overall thermal efficiency, power output and the heat-rate. In this study a thermodynamic model was development on an existing actual combined cycle gas turbine (CCGT) (In this case study, an effort has been made to enhance the performance of the CCGT through a parametric study using a thermodynamic analysis. The effect of ambient temperature and operation parameter, including compression ratio and turbine inlet temperature, on the overall performance of CCGT are investigated. The code of the performance model for CCGT power plant was developed utilizing the THERMOFLEX software. The simulating results show that the total power output and overall efficiency of a CCGT decrease with increase the ambient temperature because increase the consumption power in the air compressor of a GT. The totals power of a CCGT decreases with increase the compression rate, while the overall efficiency of a CCGT increases with increase the compression ratio to 21, after that the overall efficiency will go down. Far there more the turbine inlet temperature increases the both total power and overall efficiency increase, so the turbine inlet temperature has a strong effect on the overall performance of CCGT power plant. Also the simulation model give a good result compared with MARAFIQ CCGT power plant. With these variables, the turbine inlet temperature causes the greatest overall performance variation.

Analyses and Optimization of a Propulsion Cycle for Unmixed High Bypass Turbofan

2008 ◽  
Author(s):  
Adel Ghenaiet
Keyword(s):  
Fuel Consumption ◽  
Pressure Ratio ◽  
Specific Fuel Consumption ◽  
Design Parameters ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
High Pressure Ratio ◽  
Turbine Inlet ◽  
Design Variables ◽  
Bypass Ratio

This paper deals with a parametric study and an optimization for the design variables of a high bypass unmixed turbofan equipping commercial aircrafts. The objective of the first part of this study is to highlight the effects of the principal design parameters (bypass ratio, compression ratios, turbine inlet temperature etc..) on the uninstalled performance, in terms of specific thrust and specific fuel consumption. The second part concerns the optimization, aiming at finding the optimum design parameters concurrently minimizing the specific fuel consumption at cruise, and meeting the thrust requirement at takeoff. The cycle analyzer (on-design and off-design) as coupled to the optimization algorithm MMFD by adopting a random multi-starts search strategy is shown to be stable and converging. The predefined requirements and constraints have dictated utilizing an engine with a high-bypass ratio, high-pressure ratio and a moderate turbine inlet temperature. In general, the obtained results compare fairly well with typical data available for an equivalent ‘reference’ engine. This elaborated methodology is shown to be consistent with the conceptual design requirements and accuracy, because, it does not use components’ characteristics, and operates on simplifying assumptions. This present methodology can be readily adapted for other configurations of aero-engines as well, and easily integrated in a multi-disciplinary design approach.

Exhaust Gas Recirculation to Improve Part Load Performance on Combined Cycle Power Plants

2016 ◽  
Author(s):  
Klas Jonshagen
Keyword(s):  
Mass Flow ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Exhaust Gas ◽  
Turbine Inlet Temperature ◽  
Guide Vanes ◽  
Part Load ◽  
Turbine Inlet ◽  
Recirculation Rate ◽  
The Common

The common approach for part load operation of a combined cycle power plant is to maintain the turbine inlet temperature as high as possible without exceeding the temperature limits of the gas turbine exhaust. High part load firing temperature will give high cycle efficiency and low HC and CO emissions. The common approach is to reduce the flow by decreasing the compressor inlet flow-angle by turning the compressor variable guide vanes. This is done to control the turbine inlet temperature while the load is reduced by decreasing the fuel flow. However, using the variable guide vanes to reduce the flow renders in an offset of the compressor stage loading which has a negative impact on the efficiency. Compressors are basically volumetric flow machines and if operated on a fixed speed, a change in inlet gas density will alter the mass-flow. This means that if the inlet air is heated, the mass-flow and hence load will be reduced if turbine inlet temperature is kept constant. Thanks to the more or less maintained volume flow the compressor is operated closer to its design point and efficiency remains high. A heat exchanger, preferably with water or steam from the bottoming cycle on the hot side, would be a simple solution to heat the inlet gas. A better use of the available energy would be to semi-close the cycle by recirculating a part of the exhaust gas flow. Semi-closing the cycle means that less oxygen will be available in the combustion process and this will be one of the limiting factors for the recirculation rate. However, the fuel to air ratio decreases at part load and hence the oxygen surplus increases. Therefore, higher recirculation rates may be acceptable at part load compared to full load. The results from this thermodynamic study are very promising and show that a 40% recirculation rate can improve part load efficiency by as much as 4.1%.

A 2000-HP Military Vehicle Gas Turbine: A Study of Significant Thermodynamic and Mechanical Parameters

1968 ◽  
Author(s):  
A. F. Carter
Keyword(s):  
Gas Turbine ◽  
Pressure Ratio ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Overall Design ◽  
Blade Cooling ◽  
Turbine Inlet ◽  
Military Vehicle ◽  
Compressor Pressure Ratio ◽  
Selection Of

During a study of possible gas turbine cycles for a 2000-hp unit for tank propulsion, it has been established that the level of achievable specific fuel consumption (sfc) is principally determined by the combustor inlet temperature. If a regenerative cycle is selected, a particular value of combustor inlet temperature (and hence sfc) can be produced by an extremely large number of combinations of compressor pressure ratio, turbine inlet temperature, and heat exchanger effectiveness. This paper outlines the overall design considerations which led to the selection of a relatively low pressure ratio engine in which the turbine inlet temperature was sufficiently low that blade cooling was not necessary.

Sign in / Sign up

Export Citation Format

Share Document