Catalytic Pyrolysis of Biomass: Yields and Characterization of the Products

2008 ◽  
Author(s):  
Funda Ates ◽  
Ayse Eren Putun ◽  
Ersan Putun
Keyword(s):  
Fixed Bed ◽  
Experimental Studies ◽  
High Energy ◽  
Volatile Matter ◽  
Raw Material ◽  
Fixed Bed Reactor ◽  
Oil Composition ◽  
Bio Oil ◽  
Liquid Products ◽  
Pyrolysis Oils

Terpene hydrocarbons are high energy capacity hydrocarbons. The most known terpenoid biomass is Euphorbiaceae family. Euphorbia rigida, a member of Euphorbiaceae, was used as the biomass feedstock and natural zeolite was used as the catalyst in this study. In the experimental studies, firstly the raw material was analysed for its moisture, ash, volatile matter and fixed carbon. Then experiments were carried out in steam atmosphere in a fixed-bed reactor with a heating rate of 7 K/min, pyrolysis temperature of 823 K and mean particular size of 0.55 mm by mixing the catalyst to feedstock in different percentages. Experiments were performed with the catalyst ratios of 5, 10, 20 and 25 (weight-%) under steam atmosphere with the velocities of 12, 25 and 52 cm3/min to determine the effect of catalyst and steam on the product yields and bio-oil composition. Steam velocities were considered as the average steam velocities in the inlet tube of the reactor. The maximum bio-oil was reached to a value of 39.7% when using catalyst ratio of 20% and steam flow rate of 25 cm3/min. Pyrolysis oils were examined by using elemental analysis, IR and 1H-NMR spectroscopy. The liquid products were also fractionated by column chromatography and the gas chromatographic analysis of n-pentane eluate was performed.

Fast Pyrolysis of Biomass With Activated Alumina

2011 ◽  
Author(s):  
Funda Ates¸
Keyword(s):  
Pyrolysis Temperature ◽  
Fixed Bed ◽  
Experimental Studies ◽  
Volatile Matter ◽  
Nitrogen Atmosphere ◽  
Raw Material ◽  
Fixed Bed Reactor ◽  
Activated Alumina ◽  
Pyrolysis Oils ◽  
Pyrolysis Of Biomass

In this study, corncob was chosen as a biomass sample and the pyrolysis of this sample was carried out with or without catalyst at different conditions in a well-swept fixed-bed reactor. In the experimental studies, firstly the raw material was analysed for its moisture, ash, volatile matter and fixed carbon. Then, experiments were conducted with a heating rate of 700 °C/min, mean particle size and between 300–800 °C pyrolysis temperatures with or without catalyst. The catalytic experiments involved a dry mixing of the catalyst with the biomass using an in bed-mode in the nitrogen atmosphere. In the experimental studies, influence of catalyst and temperature on the corncob products was investigated. According to the experimental results; maximum bio-oil yield was obtained as 36.1% and 34.8% with or without catalyst at a pyrolysis temperature of 500°C, respectively. The use of catalyst showed its cracking effect at higher temperatures and the gas yield increased above pyrolysis temperature of 500 °C. Pyrolysis oils were examined by using elemental analysis and GC/MS. According to all results; the use of catalyst can be suggested in the pyrolysis to obtain both good quality fuels and valuable chemicals.

Chemical Kinetics Modeling on Bio-Oil Production from Pyrolysis of Sugarcane Bagasse

2021 ◽  
Vol 1034 ◽  
pp. 199-205
Author(s):  
Dewi Selvia Fardhyanti ◽  
Megawati ◽  
Haniif Prasetiawan ◽  
Noniek Nabuasa ◽  
Mohammad Arik Ardianta
Keyword(s):  
Sugarcane Bagasse ◽  
Alternative Energy ◽  
Fixed Bed ◽  
Raw Material ◽  
Fixed Bed Reactor ◽  
Thermochemical Conversion ◽  
Pyrolysis Process ◽  
Product Analysis ◽  
Biomass Waste ◽  
Bio Oil

Biomass is a source of alternative energy that is environmentally friendly and very promising as one of the sources of renewable energy at present. The best candidate for the biomass waste for pyrolysis raw material is sugarcane bagasse. The sugarcane bagasse is a fibrous residue that is produced after crushing sugarcane for its extraction. Sugarcane bagasse is very potential to produce bio-oil through a pyrolysis process. The advantage of utilizing sugarcane bagasse is to reduce the amount of waste volume. Pyrolysis is a simple thermochemical conversion that transforms biomass with the near absence of absence of oxygen to produce fuel. Experiments were carried out on the fixed bed reactor. The analysis was carried out over a temperature range of 300-500 °C under atmospheric conditions. Products that are usually obtained from the pyrolysis process are bio-oil, char, and gas. Product analysis was performed using Gas Chromatography (GC) and Mass Spectrometry (MS) analysis. This research is aimed to study the kinetics of the sugarcane bagasse pyrolysis process to produce bio-oil. Three different models were proposed for the kinetic study and it was found that model III gave the best prediction on the calculation of pyrolysis process. From the calculation results, kinetic parameters which include activation energy (Ea) and the k factor (A) at a temperature of 300 °C is 2.4730 kJ/mol and 0.000335 s-1, at a temperature of 400 °C is 3, 2718 kJ/mol and 0.000563 s-1, and at a temperature of 500 °C is 4.8942 kJ/mol and 0.0009 s-1.

Production and characterization of bio-oil from algae using pyrolysis

2021 ◽  
Vol 1 (1) ◽  
pp. 032-038
Author(s):  
J Sani ◽  
T Abubakar
Keyword(s):  
Liquid Fraction ◽  
Fixed Bed ◽  
Volatile Matter ◽  
Proximate Analysis ◽  
Gaseous Product ◽  
Fixed Bed Reactor ◽  
Official Method ◽  
Powdered Sample ◽  
Bio Oil

Pyrolysis of the algae (chlorophyceac) was carried out using fixed bed reactor at 4500C. The mass balance of the pyrolysed algae were liquid fraction (oil) (10%), gaseous product (11%), solid product (char) (79%) and extent of conversion (21%. The proximate analysis of powdered sample was carried out in accordance with the official method of analytical chemistry (AOAC). The moisture content, ash content, volatile matter and fixed carbon determined were 3 + 0.33, 70.3 + 0.5, 6.3 + 0.3 and 20.2 + 0.07 respectively. The result obtained indicate that algae (chlorophyceae) could be used as feedstock for generation of pyrolysed oil which could probably be upgraded to fuel for both domestic and industrial purposes.

Biomass co-pyrolysis: Effects of blending three different biomasses on oil yield and quality

2019 ◽  
Vol 37 (9) ◽  
pp. 925-933 ◽  
Author(s):  
Derya Yeşim Hopa ◽  
Oğuzhan Alagöz ◽  
Nazan Yılmaz ◽  
Meltem Dilek ◽  
Gamze Arabacı ◽  
...  
Keyword(s):  
Sugarcane Bagasse ◽  
Rice Husk ◽  
Fixed Bed ◽  
High Fatty Acid ◽  
Calorific Value ◽  
Volatile Matter ◽  
Fixed Bed Reactor ◽  
Oil Yield ◽  
Gas Chromatography Mass Spectrometry ◽  
Bio Oil

In the present study, pyrolysis and co-pyrolysis of sugarcane bagasse, poppy capsule pulp, and rice husk were conducted in a fixed bed reactor at 550⁰C in nitrogen atmosphere. The moisture (5%–8%), ash (4%–17%), volatile matter (60%–76%), and fixed carbon analyses (11%–24%) of the utilized biomass were conducted. The decomposition behavior of biomasses due to the heat effect was investigated by thermogravimetric analysis/differential thermal analysis . In the pyrolysis of biomasses separately, the highest bio-oil yield was obtained with sugarcane bagasse (27.4%). In the co-pyrolysis of the binary blends of biomass, the highest bio-oil yield was obtained with the rice husk and sugarcane bagasse blends. While the mean bio-oil yield obtained with the separate pyrolysis of these two biomasses was 23.9%, it was observed that the bio-oil yield obtained with the co-pyrolysis of biomass blends was 28.4%. This suggested a synergistic interaction between the two biomasses during pyrolysis. It was observed that as the total ash content in the biomasses used in the pyrolysis increased, the bio-oil yield decreased, and the solid product content increased. Characterization studies of bio-oils were conducted by Fourier-transform infrared spectroscopy, gas chromatography–mass spectrometry (GC-MS), and hydrogen-1 nuclear magnetic resonance analyses. Results of these studies revealed that, all bio-oils were mainly composed of aliphatic and oxygenated compounds. The calorific values of bio-oils were determined by calorimeter bomb. Based on the GC-MS, the bio-oils with high fatty acid and its ester content also had high calorific values. The highest calorific value was 29.68 MJ kg-1, and this was obtained by pyrolysis of poppy capsule and sugarcane bagasse blend.

scholarly journals Catalytic Upgrading of Pyrolysis Bio-oil by Hydrotreating and Emissions Estimation of Combustion of Gas-phase Compounds 

2020 ◽  
Author(s):  
Rami Doukeh ◽  
Dorin Bombos ◽  
Mihaela Bombos ◽  
Elena-Emilia Oprescu ◽  
Gheorghe Dumitrascu ◽  
...  
Keyword(s):  
Natural Gas ◽  
Combustion Engine ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Oil Composition ◽  
Calculation Algorithm ◽  
Catalytic Upgrading ◽  
Bio Oil ◽  
Combustible Gases ◽  
Area X

Abstract An attractive solution for improvement of pyrolysis bio-oil composition regarding the high content of oxygenated compounds is catalytic upgrading via hydrotreating process. The objective of this work is to evaluate the catalytic activity of CoMo /γ-Al2O3-HMS in bio-oil hydrotreating. The catalyst was characterized by surface area, X-ray diffraction (XRD), TEM, FT-IR and XPS analysis. The experiments were carried out in a flow fixed-bed reactor at the temperature range of 250-320 oC, pressure between 20-40 bar, and LHSV 3h-1. The results showed that increased temperature and pressure favors the hydrodeoxygenation process, reaching the maxim bio-oil conversion of 87.23%. Also, a chemical modelling algorithm was developed in order to evaluate the harmful emissions resulted from hydrotreating gaseous phase combustion. This calculation algorithm can be applied to any pressurized or atmospheric combustion engine fueled with different mixture of combustible gases such as: natural gas, hydrogen-enriched natural gas and oxy-fuel.

scholarly journals Bio-Oil Characterizations of Spirulina Platensis Residue (SPR) Pyrolysis Products for Renewable Energy Development

2020 ◽  
Vol 849 ◽  
pp. 47-52
Author(s):  
Siti Jamilatun ◽  
Aster Rahayu ◽  
Yano Surya Pradana ◽  
Budhijanto ◽  
Rochmadi ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Spirulina Platensis ◽  
Pyrolysis Temperature ◽  
Renewable Energy Sources ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Oil Yield ◽  
Optimum Temperature ◽  
Pyrolysis Products ◽  
Bio Oil

Nowadays, energy consumption has increased as a population increases with socio-economic developments and improved living standards. Therefore, it is necessary to find a replacement for fossil energy with renewable energy sources, and the potential to develop is biofuels. Bio-oil, water phase, gas, and char products will be produced by utilizing Spirulina platensis (SPR) microalgae extraction residue as pyrolysis raw material. The purpose of this study is to characterize pyrolysis products and bio-oil analysis with GC-MS. Quality fuel is good if O/C is low, H/C is high, HHV is high, and oxygenate compounds are low, but aliphatic and aromatic are high. Pyrolysis was carried out at a temperature of 300-600°C with a feed of 50 grams in atmospheric conditions with a heating rate of 5-35°C/min, the equipment used was a fixed-bed reactor. The higher the pyrolysis temperature, the higher the bio-oil yield will be to an optimum temperature, then lower. The optimum temperature of pyrolysis is 550°C with a bio-oil yield of 23.99 wt%. The higher the pyrolysis temperature, the higher the H/C, the lower O/C. The optimum condition was reached at a temperature of 500°C with the values of H/C, and O/C is 1.17 and 0.47. With an increase in temperature of 300-600°C, HHV increased from 11.64 MJ/kg to 20.63 MJ/kg, the oxygenate compound decreased from 85.26 to 37.55 wt%. Aliphatics and aromatics increased, respectively, from 5.76 to 36.72 wt% and 1.67 to 6.67 wt%.

scholarly journals Green energy technology from buriti (Mauritia flexuosa L. f.) for Brazilian agro-extractive communities

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Munique Gonçalves Guimarães ◽  
Rafael Benjamin Werneburg Evaristo ◽  
Augusto César de Mendonça Brasil ◽  
Grace Ferreira Ghesti
Keyword(s):  
Lignin Content ◽  
Fixed Bed ◽  
Thermal Conversion ◽  
Volatile Matter ◽  
Matter Content ◽  
Green Energy ◽  
Fixed Bed Reactor ◽  
Gasification Process ◽  
Mauritia Flexuosa ◽  
Immediate Analysis

AbstractThe present work analyzed the energy generation potential of Buriti (Mauritia flexuosa L. f.) by thermochemical reactions. The experimental part of the study performed immediate analyses, elemental analyses, lignocellulosic analysis, thermogravimetric analysis, calorific values, and syn gas concentrations measurements of the gasification of Buriti in a fixed-bed reactor. Additionally, numerical simulations estimated the syn gas concentrations of the gasification reactions of Buriti. The immediate analysis showed that Buriti has the highest ash content (4.66%) and highest volatile matter content (85%) compared to other Brazilian biomass analyzed, but the higher heating value was only 18.28 MJ.kg−1. The elemental analysis revealed that the oxygen to carbon ratio was 0.51 while hydrogen to carbon ratio was 1.74, indicating a good thermal conversion efficiency. The Lignocellulosic analysis of Buriti resulted in a high content of holocellulose (69.64%), a lignin content of 28.21% and extractives content of 7.52%. The thermogravimetry of the Buriti indicated that the highest mass loss (51.92%) occurred in a temperature range between 150 °C and 370 °C. Lastly, the experimental gasification study in a fixed-bed updraft gasifier resulted in syn gas concentrations of 14.4% of CO, 11.5% of CO2 and 17.5% of H2 while the numerical simulation results confirmed an optimal equivalence ratio of 1.7 to maximize CO and H2 concentrations. Therefore, based on the results presented by the present work, the gasification process is adequate to transform Buriti wastes into energy resources. Graphic abstract

Application of Biofilm Kinetics to Anaerobic Fixed Bed Reactors

1991 ◽  
Vol 23 (7-9) ◽  
pp. 1319-1326 ◽  
Author(s):  
I. E. Gönenç ◽  
D. Orhon ◽  
B. Beler Baykal
Keyword(s):  
Removal Rate ◽  
Fixed Bed ◽  
Experimental Studies ◽  
Pilot Scale ◽  
Cod Removal ◽  
Experimental Results ◽  
Fixed Bed Reactor ◽  
Removal Mechanism ◽  
Term Operation ◽  
Fixed Bed Reactors

Two basic phenomena, reactor hydraulics and mass transport through biofilm coupled with kinetic expressions for substrate transformations were accounted for in order to describe the soluble COD removal mechanism in anaerobic fixed bed reactors. To provide necessary verification, experimental results from the long term operation of the pilot scale anaerobic reactor treating molasses wastewater were used. Theoretical evaluations verified by these experimental studies showed that a bulk zero-order removal rate expression modified by diffusional resistance leading to bulk half-order and first-order rates together with the particular hydraulic conditions could adequately define the overall soluble COD removal mechanism in an anaerobic fixed bed reactor. The experimental results were also used to determine the kinetic constants for practical application. In view of the complexity of the phenomena involved it is found remarkable that a simple simulation model based on biofilm kinetics is a powerful tool for design and operation of anaerobic fixed bed reactors.

Sign in / Sign up

Export Citation Format

Share Document