Tin as a Possible Candidate for Solar Thermochemical Redox Process for Hydrogen Production

2007 ◽  
Author(s):  
Irina Vishnevetsky ◽  
Michael Epstein
Keyword(s):  
Hydrogen Production ◽  
Water Splitting ◽  
Industrial Production ◽  
Reducing Agents ◽  
Redox Process ◽  
Hydrogen Yield ◽  
Promising Candidate ◽  
Experimental Conditions ◽  
Hydrolysis Process ◽  
Reactor Temperature

The feasibility to produce hydrogen in the Sn-H2O/SnO2-C thermochemical water splitting redox process depends mainly on the efficiency of the tin hydrolysis step which has not been studied adequately so far, whereas the carboreduction step was investigated because of the industrial production of tin from its mineral casseterite using charcoal or anthracite as reducing agents. The present work deals with the hydrolysis process of different kinds of tin powders at different experimental conditions at moderate temperature range of 180–620°C. In spite of the fact that the rate of hydrogen production is lower compared to other metals e.g. zinc, at the same reactor temperature, high conversion and hydrogen yield were obtained in a controllable reaction. Consequently, tin can be a promising candidate considering the advantage of significant lower temperatures required for the solar carboreduction of its oxide.

Tin as a Possible Candidate for Solar Thermochemical Redox Process for Hydrogen Production

2009 ◽  
Vol 131 (2) ◽  
Author(s):  
Irina Vishnevetsky ◽  
Michael Epstein
Keyword(s):  
Hydrogen Production ◽  
Water Splitting ◽  
Redox Process ◽  
Experimental Conditions ◽  
Solar Hydrogen ◽  
Conversion Level ◽  
Reactor Temperature ◽  
Solar Hydrogen Production ◽  
Hydrolysis Of ◽  
High Conversion Level

The feasibility to produce hydrogen in the Sn–H2O/SnO2–C thermochemical water splitting redox process depends mainly on the efficiency of the tin hydrolysis step, which has not been studied adequately so far, while the cassererite carboreduction is implemented by industry for tin production. The present work deals with the hydrolysis of different kinds of tin powders at different experimental conditions at moderate temperature range 180–620°C. In spite of the fact that the rate of hydrogen production is lower compared with other metals, e.g., zinc, at the same reactor temperature, high conversion level was obtained in a controllable reaction. Consequently, tin can be a relevant candidate for solar hydrogen production considering the advantage of significant lower temperatures required for the solar carboreduction of its oxide.

scholarly journals Hydrogen Production from Coffee Mucilage in Dark Fermentation with Organic Wastes

Energies ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 71 ◽  
Author(s):  
Edilson Cárdenas ◽  
Arley Zapata-Zapata ◽  
Daehwan Kim
Keyword(s):  
Hydrogen Production ◽  
Manufacturing Industry ◽  
Nitrogen Sources ◽  
Bacterial Consortium ◽  
Dark Fermentation ◽  
Organic Wastes ◽  
Hydrogen Yield ◽  
Hydrogen Metabolism ◽  
Wholesale Market ◽  
Experimental Conditions

One of primary issues in the coffee manufacturing industry is the production of large amounts of undesirable residues, which include the pericarp (outer skin), pulp (outer mesocarp), parchment (endocarp), silver-skin (epidermis) and mucilage (inner mesocarp) that cause environmental problems due to toxic molecules contained therein. This study evaluated the optimal hydrogen production from coffee mucilage combined with organic wastes (wholesale market garbage) in a dark fermentation process. The supplementation of organic wastes offered appropriate carbon and nitrogen sources with further nutrients; it was positively effective in achieving cumulative hydrogen production. Three different ratios of coffee mucilage and organic wastes (8:2, 5:5, and 2:8) were tested in 30 L bioreactors using two-level factorial design experiments. The highest cumulative hydrogen volume of 25.9 L was gained for an 8:2 ratio (coffee mucilage: organic wastes) after 72 h, which corresponded to 1.295 L hydrogen/L substrates (0.248 mol hydrogen/mol hexose). Biochemical identification of microorganisms found that seven microorganisms were involved in the hydrogen metabolism. Further studies of anaerobic fermentative digestion with each isolated pure bacterium under similar experimental conditions reached a lower final hydrogen yield (up to 9.3 L) than the result from the non-isolated sample (25.9 L). Interestingly, however, co-cultivation of two identified microorganisms (Kocuria kristinae and Brevibacillus laterosporus), who were relatively highly associated with hydrogen production, gave a higher yield (14.7 L) than single bacterium inoculum but lower than that of the non-isolated tests. This work confirms that the re-utilization of coffee mucilage combined with organic wastes is practical for hydrogen fermentation in anaerobic conditions, and it would be influenced by the bacterial consortium involved.

Semiconductor Photocatalysts for Solar-to-Hydrogen Energy Conversion: Recent Advances of CdS

2020 ◽  
Vol 16 ◽  
Author(s):  
Yuxue Wei ◽  
Honglin Qin ◽  
Jinxin Deng ◽  
Xiaomeng Cheng ◽  
Mengdie Cai ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Visible Light ◽  
Hydrogen Evolution ◽  
Water Splitting ◽  
Visible Light Irradiation ◽  
Noble Metals ◽  
Light Irradiation ◽  
Photocatalytic Hydrogen Evolution ◽  
Theoretical Design ◽  
Recent Developments

Introduction: Solar-driven photocatalytic hydrogen production from water splitting is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. In this review, recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. In particular, the factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Background: Photocatalytic hydrogen evolution from water splitting using photocatalyst semiconductors is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. Methods: This review summarizes the recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation. Results: Recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. The factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Conclusion: The state-of-the-art CdS for producing hydrogen from photocatalytic water splitting under visible light is discussed. The future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are also described.

Carrier Engineering of Zr-mediated Ta3N5 Film as Efficient Photoanode for Solar Water Splitting

2021 ◽  
Author(s):  
Xin Zou ◽  
Xueyang Han ◽  
Chengxiong Wang ◽  
Yunkun Zhao ◽  
Chun Du ◽  
...  
Keyword(s):  
Band Structure ◽  
Visible Light ◽  
Water Splitting ◽  
Light Absorption ◽  
Photoelectrochemical Water Splitting ◽  
Promising Candidate ◽  
Visible Light Absorption ◽  
Solar Water ◽  
Solar Water Splitting

Ta3N5 is regarded as a promising candidate material with adequate visible light absorption and band structure for photoelectrochemical water splitting. However, the performance of Ta3N5 is severely limited by the...

scholarly journals Hydrogen Production by Fluidized Bed Reactors: A Quantitative Perspective Using the Supervised Machine Learning Approach

J ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 266-287
Author(s):  
Zheng Lian ◽  
Yixiao Wang ◽  
Xiyue Zhang ◽  
Abubakar Yusuf ◽  
Lord Famiyeh ◽  
...  
Keyword(s):  
Machine Learning ◽  
Hydrogen Production ◽  
Fluidized Bed ◽  
Biomass Gasification ◽  
Supervised Machine Learning ◽  
Fluidized Bed Reactors ◽  
Hydrogen Yield ◽  
Carbon Conversion ◽  
Operational Parameters ◽  
Operational Conditions

The current hydrogen generation technologies, especially biomass gasification using fluidized bed reactors (FBRs), were rigorously reviewed. There are involute operational parameters in a fluidized bed gasifier that determine the anticipated outcomes for hydrogen production purposes. However, limited reviews are present that link these parametric conditions with the corresponding performances based on experimental data collection. Using the constructed artificial neural networks (ANNs) as the supervised machine learning algorithm for data training, the operational parameters from 52 literature reports were utilized to perform both the qualitative and quantitative assessments of the performance, such as the hydrogen yield (HY), hydrogen content (HC) and carbon conversion efficiency (CCE). Seven types of operational parameters, including the steam-to-biomass ratio (SBR), equivalent ratio (ER), temperature, particle size of the feedstock, residence time, lower heating value (LHV) and carbon content (CC), were closely investigated. Six binary parameters have been identified to be statistically significant to the performance parameters (hydrogen yield (HY)), hydrogen content (HC) and carbon conversion efficiency (CCE)) by analysis of variance (ANOVA). The optimal operational conditions derived from the machine leaning were recommended according to the needs of the outcomes. This review may provide helpful insights for researchers to comprehensively consider the operational conditions in order to achieve high hydrogen production using fluidized bed reactors during biomass gasification.

A Strategy for Preparing High-efficiency and Economical Catalytic Electrodes toward Overall Water Splitting

Nanoscale ◽  
2021 ◽  
Author(s):  
Dongxue Yao ◽  
Lingling Gu ◽  
Bin Zuo ◽  
Shuo Weng ◽  
Shengwei Deng ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Water Splitting ◽  
Production Technology ◽  
High Purity ◽  
High Efficiency ◽  
Energy Development ◽  
Overall Water Splitting ◽  
Important Field ◽  
High Purity Hydrogen

The technology of electrolyzing water to prepare high-purity hydrogen is an important field in today's energy development. However, how to prepare efficient, stable, and inexpensive hydrogen production technology from electrolyzed...

scholarly journals Hydrogen production from water electrolysis: role of catalysts

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Shan Wang ◽  
Aolin Lu ◽  
Chuan-Jian Zhong
Keyword(s):  
Hydrogen Production ◽  
Water Splitting ◽  
Noble Metal ◽  
Active Sites ◽  
Current Knowledge ◽  
Low Cost ◽  
Critical Role ◽  
Water Electrolysis ◽  
Efficient Production ◽  
Production Of Hydrogen

AbstractAs a promising substitute for fossil fuels, hydrogen has emerged as a clean and renewable energy. A key challenge is the efficient production of hydrogen to meet the commercial-scale demand of hydrogen. Water splitting electrolysis is a promising pathway to achieve the efficient hydrogen production in terms of energy conversion and storage in which catalysis or electrocatalysis plays a critical role. The development of active, stable, and low-cost catalysts or electrocatalysts is an essential prerequisite for achieving the desired electrocatalytic hydrogen production from water splitting for practical use, which constitutes the central focus of this review. It will start with an introduction of the water splitting performance evaluation of various electrocatalysts in terms of activity, stability, and efficiency. This will be followed by outlining current knowledge on the two half-cell reactions, hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), in terms of reaction mechanisms in alkaline and acidic media. Recent advances in the design and preparation of nanostructured noble-metal and non-noble metal-based electrocatalysts will be discussed. New strategies and insights in exploring the synergistic structure, morphology, composition, and active sites of the nanostructured electrocatalysts for increasing the electrocatalytic activity and stability in HER and OER will be highlighted. Finally, future challenges and perspectives in the design of active and robust electrocatalysts for HER and OER towards efficient production of hydrogen from water splitting electrolysis will also be outlined.

Sign in / Sign up

Export Citation Format

Share Document