A 1+1D Thermal Dynamic Model of a Li-Ion Battery Cell

2010 ◽  
Author(s):  
Matteo Muratori ◽  
Ning Ma ◽  
Marcello Canova ◽  
Yann Guezennec
Keyword(s):  
Temperature Distribution ◽  
Boundary Conditions ◽  
Thermal Management ◽  
Cooling System ◽  
Heat Diffusion ◽  
Li Ion Battery ◽  
Battery Cell ◽  
Heat Diffusion Equation ◽  
One Dimensional ◽  
Li Ion

Li-ion batteries are today considered the prime solution as energy storage system for EV/PHEV/HEV, due to their high specific energy and power. Since their performance, life and reliability are influenced by the operating temperature, great interest has been devoted to study different cooling solutions and control algorithms for thermal management. In this context, this paper presents a computationally efficient modeling approach to characterize the internal temperature distribution of a Li-ion battery cell, conceived to serve as a tool to aid the design of cooling systems and the development of thermal management systems for automotive battery packs. The model is developed starting from the unsteady heat diffusion equation, for which an analytical solution is obtained through the integral transform method. First, a general one-dimensional thermal model is developed to predict the temperature distribution inside a prismatic Li-ion battery cell under different boundary conditions. Then, a specific case with convective boundary conditions is studied with the objective of characterizing a cell cooled by a forced air flow. To characterize the effects of the cooling system on the temperature distribution within the cell, the one-dimensional solution is then extended to a 1+1D model that accounts for the variability of the boundary conditions in the flow direction. The calibration and validation of the specific model presented will be presented, adopting a detailed 2D FEM simulator as a benchmark.

scholarly journals Transient Thermal Analysis of a Li-Ion Battery Module for Electric Cars Based on Various Cooling Fan Arrangements

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2387
Author(s):  
Van-Thanh Ho ◽  
Kyoungsik Chang ◽  
Sang Wook Lee ◽  
Sung Han Kim
Keyword(s):  
Temperature Difference ◽  
Cooling System ◽  
Maximum Temperature ◽  
Clear Understanding ◽  
Li Ion Battery ◽  
Discharge Condition ◽  
Battery Cell ◽  
Electric Cars ◽  
Li Ion ◽  
Battery Module

This paper presents a three-dimensional modeling approach to simulate the thermal performance of a Li-ion battery module for a new urban car. A single-battery cell and a 52.3 Ah Li-ion battery module were considered, and a Newman, Tiedemann, Gu, and Kim (NTGK) model was adopted for the electrochemical modeling based on input parameters from the discharge experiment. A thermal–electrochemical coupled method was established to provide insight into the temperature variations over time under various discharge conditions. The distribution temperature of a single-battery cell was predicted accurately. Additionally, in a 5C discharge condition without a cooling system, the temperature of the battery module reached 114 °C, and the temperature difference increased to 25 °C under a 5C discharging condition. This condition led to the activation of thermal runaway and the possibility of an explosion. However, the application of a reasonable fan circulation and position reduced the maximum temperature to 49.7 °C under the 5C discharge condition. Moreover, accurate prediction of the temperature difference between cell areas during operation allowed for a clear understanding and design of an appropriate fan system.

scholarly journals Design of an Optimized Thermal Management System for Li-Ion Batteries under Different Discharging Conditions

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5695 ◽  
Author(s):  
Ankur Bhattacharjee ◽  
Rakesh K. Mohanty ◽  
Aritra Ghosh
Keyword(s):  
Thermal Management ◽  
Cooling System ◽  
Peak Temperature ◽  
Air Cooling ◽  
Li Ion Batteries ◽  
Li Ion Battery ◽  
Liquid Cooling ◽  
Thermal Management System ◽  
Li Ion ◽  
Liquid Cooling System

The design of an optimized thermal management system for Li-ion batteries has challenges because of their stringent operating temperature limit and thermal runaway, which may lead to an explosion. In this paper, an optimized cooling system is proposed for kW scale Li-ion battery stack. A comparative study of the existing cooling systems; air cooling and liquid cooling respectively, has been carried out on three cell stack 70Ah LiFePO4 battery at a high discharging rate of 2C. It has been found that the liquid cooling is more efficient than air cooling as the peak temperature of the battery stack gets reduced by 30.62% using air cooling whereas using the liquid cooling method it gets reduced by 38.40%. The performance of the liquid cooling system can further be improved if the contact area between the coolant and battery stack is increased. Therefore, in this work, an immersion-based liquid cooling system has been designed to ensure the maximum heat dissipation. The battery stack having a peak temperature of 49.76 °C at 2C discharging rate is reduced by 44.87% to 27.43 °C after using the immersion-based cooling technique. The proposed thermal management scheme is generalized and thus can be very useful for scalable Li-ion battery storage applications also.

Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers

Energy ◽  
2016 ◽  
Vol 96 ◽  
pp. 355-371 ◽  
Author(s):  
Fereshteh Samimi ◽  
Aziz Babapoor ◽  
Mohammadmehdi Azizi ◽  
Gholamreza Karimi
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Thermal Management ◽  
Carbon Fibers ◽  
Li Ion Battery ◽  
Battery Cell ◽  
Li Ion ◽  
Change Material

scholarly journals Analysis of Heat-Spreading Thermal Management Solutions for Lithium-Ion Batteries

2011 ◽  
Author(s):  
Hussam Khasawneh ◽  
John Neal ◽  
Marcello Canova ◽  
Yann Guezennec ◽  
Ryan Wayne ◽  
...  
Keyword(s):  
Thermal Behavior ◽  
Thermal Management ◽  
Management System ◽  
Cooling System ◽  
Battery Pack ◽  
Li Ion Battery ◽  
Thermal Management System ◽  
Li Ion ◽  
Flexible Graphite ◽  
Heat Spreading

The analysis and optimization of thermal performance of Li-ion battery packs are topics of great interest today. Most Li-ion batteries for motive, vehicular, backup power and utility energy storage applications are fitted with a microprocessor-controlled thermal management system including an array of temperature and voltage sensors and an active cooling system. However, as the complexity of the thermal management system increases, so does its weight, volume and parasitic power consumption, all factors that adversely affect the vehicle’s performance. In this sense, an improved thermal management system based on including passive solutions such as phase change materials or heat spreading technologies could decrease the load on active components and ultimately the weight and costs of the system. This paper describes an experimental and simulation study aimed at evaluating the effectiveness of flexible graphite materials for heat spreaders in battery thermal management systems. A commercial Li-ion battery pack for power tools applications was adopted as a case study. The electro-thermal behavior of the battery pack was characterized through combined experimental investigation and 3D FEM modeling to determine the heat generation rate of the battery cells during utilization and to evaluate the thermal behavior of the battery pack. A thermal management solution based on flexible graphite heat spreading material was then designed and implemented. The paper presents a comparative study conducted in simulation to evaluate the improvements in the pack thermal behavior.

Real-Time Estimation of Lithium-Ion Concentration in Both Electrodes of a Lithium-Ion Battery Cell Utilizing Electrochemical–Thermal Coupling

2017 ◽  
Vol 139 (3) ◽  
Author(s):  
Satadru Dey ◽  
Beshah Ayalew
Keyword(s):  
Real Time ◽  
Unscented Kalman Filter ◽  
Lithium Ion ◽  
Time Estimation ◽  
Li Ion Battery ◽  
Battery Cell ◽  
Thermal Dynamics ◽  
Estimation Scheme ◽  
Real Time Estimation ◽  
Li Ion

This paper proposes and demonstrates an estimation scheme for Li-ion concentrations in both electrodes of a Li-ion battery cell. The well-known observability deficiencies in the two-electrode electrochemical models of Li-ion battery cells are first overcome by extending them with a thermal evolution model. Essentially, coupling of electrochemical–thermal dynamics emerging from the fact that the lithium concentrations contribute to the entropic heat generation is utilized to overcome the observability issue. Then, an estimation scheme comprised of a cascade of a sliding-mode observer and an unscented Kalman filter (UKF) is constructed that exploits the resulting structure of the coupled model. The approach gives new real-time estimation capabilities for two often-sought pieces of information about a battery cell: (1) estimation of cell-capacity and (2) tracking the capacity loss due to degradation mechanisms such as lithium plating. These capabilities are possible since the two-electrode model needs not be reduced further to a single-electrode model by adding Li conservation assumptions, which do not hold with long-term operation. Simulation studies are included for the validation of the proposed scheme. Effect of measurement noise and parametric uncertainties is also included in the simulation results to evaluate the performance of the proposed scheme.

Development of the Li-ion Battery Cell for Hybrid Vehicle

2016 ◽  
Author(s):  
Hiroki Nagai ◽  
Masahiro Morita ◽  
Koichi Satoh
Keyword(s):  
Hybrid Vehicle ◽  
Li Ion Battery ◽  
Battery Cell ◽  
Li Ion

scholarly journals Thermal Performance of a Cylindrical Lithium-Ion Battery Module Cooled by Two-Phase Refrigerant Circulation

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8094
Author(s):  
Bichao Lin ◽  
Jiwen Cen ◽  
Fangming Jiang
Keyword(s):  
Thermal Management ◽  
Management System ◽  
Cooling System ◽  
Maximum Temperature ◽  
Two Phase ◽  
Battery Thermal Management ◽  
Thermal Management System ◽  
Battery Thermal Management System ◽  
Li Ion ◽  
Battery Module

It is important for the safety and good performance of a Li-ion battery module/pack to have an efficient thermal management system. In this paper, a battery thermal management system with a two-phase refrigerant circulated by a pump was developed. A battery module consisting of 240 18650-type Li-ion batteries was fabricated based on a finned-tube heat-exchanger structure. This structural design offers the potential to reduce the weight of the battery thermal management system. The cooling performance of the battery module was experimentally studied under different charge/discharge C-rates and with different refrigerant circulation pump operation frequencies. The results demonstrated the effectiveness of the cooling system. It was found that the refrigerant-based battery thermal management system could maintain the battery module maximum temperature under 38 °C and the temperature non-uniformity within 2.5 °C for the various operation conditions considered. The experimental results with 0.5 C charging and a US06 drive cycle showed that the thermal management system could reduce the maximum temperature difference in the battery module from an initial value of 4.5 °C to 2.6 °C, and from the initial 1.3 °C to 1.1 °C, respectively. In addition, the variable pump frequency mode was found to be effective at controlling the battery module, functioning at a desirable constant temperature and at the same time minimizing the pump work consumption.

Sign in / Sign up

Export Citation Format

Share Document