scholarly journals A Simple Aspect Ratio Dependent Method of Patterning Microwells for Selective Cell Attachment

2018 ◽  
Author(s):  
Erik A. Zavrel ◽  
Michael L. Shuler ◽  
Xiling Shen
Keyword(s):  
Cell Culture ◽  
Cell Attachment ◽  
In Vitro Models ◽  
Contact Printing ◽  
Deep Well ◽  
Biomimetic Approach ◽  
Authentic Environment ◽  
And Control

3-D culture has been shown to provide cells with a more physiologically authentic environment than traditional 2-D (planar) culture [1, 2]. 3-D cues allow cells to exhibit more realistic functions and behaviors, e.g., adhesion, spreading, migration, metabolic activity, and differentiation. Knowledge of changes in cell morphology, mechanics, and mobility in response to geometrical cues and topological stimuli is important for understanding normal and pathological cell development [3]. Microfabrication provides unique in vitro approaches to recapitulating in vivo conditions due to the ability to precisely control the cellular microenvironment [4, 5]. Microwell arrays have emerged as robust alternatives to traditional 2D cell culture substrates as they are relatively simple and compatible with existing laboratory techniques and instrumentation [6, 7]. In particular, microwells have been adopted as a biomimetic approach to modeling the unique micro-architecture of the epithelial lining of the gastrointestinal (GI) tract [8–10]. The inner (lumen-facing) surface of the intestine has a convoluted topography consisting of finger-like projections (villi) with deep well-like invaginations (crypts) between them. The dimensions of villi and crypts are on the order of hundreds of microns (100–700 μm in height and 50–250 μm in diameter) [11]. While microwells have proven important in the development of physiologically realistic in vitro models of human intestine, existing methods of ensuring their surface is suitable for cell culture are lacking. Sometimes it is desirable to selectively seed cells within microwells and confine or restrict them to the microwells in which they are seeded. Existing methods of patterning microwells for cell attachment either lack selectivity, meaning cells can adhere and migrate anywhere on the microwell array, i.e., inside microwells or outside of them, or necessitate sophisticated techniques such as micro-contact printing, which requires precise alignment and control to selectively pattern the bottoms of microwells for cell attachment [12, 13].

scholarly journals Modelling the Human Placental Interface In Vitro—A Review

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 884
Author(s):  
Marta Cherubini ◽  
Scott Erickson ◽  
Kristina Haase
Keyword(s):  
Drug Testing ◽  
Cell Types ◽  
In Vitro Models ◽  
Placental Development ◽  
Scientific Challenge ◽  
Induced Pluripotent ◽  
And Function ◽  
And Control

Acting as the primary link between mother and fetus, the placenta is involved in regulating nutrient, oxygen, and waste exchange; thus, healthy placental development is crucial for a successful pregnancy. In line with the increasing demands of the fetus, the placenta evolves throughout pregnancy, making it a particularly difficult organ to study. Research into placental development and dysfunction poses a unique scientific challenge due to ethical constraints and the differences in morphology and function that exist between species. Recently, there have been increased efforts towards generating in vitro models of the human placenta. Advancements in the differentiation of human induced pluripotent stem cells (hiPSCs), microfluidics, and bioprinting have each contributed to the development of new models, which can be designed to closely match physiological in vivo conditions. By including relevant placental cell types and control over the microenvironment, these new in vitro models promise to reveal clues to the pathogenesis of placental dysfunction and facilitate drug testing across the maternal–fetal interface. In this minireview, we aim to highlight current in vitro placental models and their applications in the study of disease and discuss future avenues for these in vitro models.

scholarly journals Tailoring 3D cell culture templates with common hydrogels

2018 ◽  
Author(s):  
Aurélien Pasturel ◽  
Pierre-Olivier Strale ◽  
Vincent Studer
Keyword(s):  
Cell Culture ◽  
3D Cell Culture ◽  
In Vitro Models ◽  
Manufacturing Method ◽  
Biologically Relevant ◽  
Physiological Conditions ◽  
Subtractive Manufacturing ◽  
User Friendly

3D cell culture aims at reconciliating the simplicity of in vitro models with the human like properties encountered in vivo. Soft permeable hydrogels have emerged as user-friendly materials to grow cells in more physiological conditions. With the intent on turning these homogeneous substrates into biomimetic templates, we introduce a generic solution compatible with the most biologically relevant and often frail materials. Here we take control of the chemical environment driving generic radical reactions to craft common gels with patterned light. In a simple microreactor, we harness the well-known inhibition of radicals by oxygen to enable topographical photopolymerization. Strikingly, by sustaining an oxygen rich environment, we can also induce hydrogel photo-scission which turns out to be a powerful and generic subtractive manufacturing method. We finally introduce a flexible patterned functionalization protocol based on available photo-linkers. Using these common tools on the most popular hydrogels, we tailored soft templates where cells grow or self-organize into standardized structures. The platform we describe has the potential to set a standard in future 3D cell culture experiments.

scholarly journals Breaking the Third Wall: Implementing 3D-Printing Technics to Expand the Complexity and Abilities of Multi-Organ-on-a-Chip Devices

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 627
Author(s):  
Yoel Goldstein ◽  
Sarah Spitz ◽  
Keren Turjeman ◽  
Florian Selinger ◽  
Yechezkel Barenholz ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cfd Simulation ◽  
Cost Effective ◽  
In Vitro Models ◽  
3D Print ◽  
Biological Compatibility ◽  
3D Printed ◽  
Organ On A Chip

The understanding that systemic context and tissue crosstalk are essential keys for bridging the gap between in vitro models and in vivo conditions led to a growing effort in the last decade to develop advanced multi-organ-on-a-chip devices. However, many of the proposed devices have failed to implement the means to allow for conditions tailored to each organ individually, a crucial aspect in cell functionality. Here, we present two 3D-print-based fabrication methods for a generic multi-organ-on-a-chip device: One with a PDMS microfluidic core unit and one based on 3D-printed units. The device was designed for culturing different tissues in separate compartments by integrating individual pairs of inlets and outlets, thus enabling tissue-specific perfusion rates that facilitate the generation of individual tissue-adapted perfusion profiles. The device allowed tissue crosstalk using microchannel configuration and permeable membranes used as barriers between individual cell culture compartments. Computational fluid dynamics (CFD) simulation confirmed the capability to generate significant differences in shear stress between the two individual culture compartments, each with a selective shear force. In addition, we provide preliminary findings that indicate the feasibility for biological compatibility for cell culture and long-term incubation in 3D-printed wells. Finally, we offer a cost-effective, accessible protocol enabling the design and fabrication of advanced multi-organ-on-a-chip devices.

scholarly journals An in vitro model maintaining taxon-specific functional activities of the gut microbiome

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Leyuan Li ◽  
Elias Abou-Samra ◽  
Zhibin Ning ◽  
Xu Zhang ◽  
Janice Mayne ◽  
...  
Keyword(s):  
Gut Microbiome ◽  
Fold Increase ◽  
Efficient Solutions ◽  
In Vitro Models ◽  
Deep Well ◽  
Viable Bacteria ◽  
Cost Efficient ◽  
Vitro Model

Abstract In vitro gut microbiome models could provide timely and cost-efficient solutions to study microbiome responses to drugs. For this purpose, in vitro models that maintain the functional and compositional profiles of in vivo gut microbiomes would be extremely valuable. Here, we present a 96-deep well plate-based culturing model (MiPro) that maintains the functional and compositional profiles of individual gut microbiomes, as assessed by metaproteomics, while allowing a four-fold increase in viable bacteria counts. Comparison of taxon-specific functions between pre- and post-culture microbiomes shows a Pearson’s correlation coefficient r of 0.83 ± 0.03. In addition, we show a high degree of correlation between gut microbiome responses to metformin in the MiPro model and those in mice fed a high-fat diet. We propose MiPro as an in vitro gut microbiome model for scalable investigation of drug-microbiome interactions such as during high-throughput drug screening.

scholarly journals Cytotoxicity Studies on Naproxen and Piroxicam Nanoformulations

2020 ◽  
Vol 8 (3) ◽  
pp. 87-94
Author(s):  
Sandeep Patnaik ◽  
K Madhusudhana Rao ◽  
Vijay Sai
Keyword(s):  
Cell Culture ◽  
Cell Viability ◽  
Cultured Cells ◽  
In Vitro Models ◽  
In Vivo Studies ◽  
Tetrazolium Salt ◽  
Mucous Layer ◽  
Cytotoxicity Studies

Caco-2 cells were used as in vitro models to assess the cell viability characteristics of the carriers Soluplus®, Gelucire 50/13 and PVP K25 and the nanoformulations of Naproxen and Piroxicam. The assessment of cell viability was done using the tetrazolium salt based MTT assay. Gelucire 50/13 and its NFs were observed to have slightly higher cytotoxicity than PVP and Soluplus® and their respective NFs. All the NFs were observed to follow the cytotoxicity trend of the polymers. Our results show that no significant decrease in cell viability was seen until 0.01% concentration of Gelucire 50/13 for 12-h exposure. The NFs as well as the polymers alone had no significant effect on the viability of Caco-2 cells below 0.01% concentrations. The intestine has a protective mucous layer, whereas the cell culture monolayers do not. The intestinal tissues also have more capacity to recover from trauma than the cultured cells. Hence the present NFs can be expected to show lesser cytotoxicity when subjected to in vivo studies.  

Modulation of Matrix Metalloproteinases by Plant-Derived Products

2020 ◽  
Vol 20 ◽  
Author(s):  
Nur Najmi Mohamad Anuar ◽  
Nurul Iman Natasya Zulkafali ◽  
Azizah Ugusman
Keyword(s):  
Clinical Trials ◽  
Natural Products ◽  
Matrix Metalloproteinases ◽  
Animal Studies ◽  
Current Knowledge ◽  
In Vitro Models ◽  
In Vivo Studies ◽  
Extracellular Matrix Components

: Matrix metalloproteinases (MMPs) are a group of zinc-dependent metallo-endopeptidase that are responsible towards the degradation, repair and remodelling of extracellular matrix components. MMPs play an important role in maintaining a normal physiological function and preventing diseases such as cancer and cardiovascular diseases. Natural products derived from plants have been used as traditional medicine for centuries. Its active compounds, such as catechin, resveratrol and quercetin, are suggested to play an important role as MMPs inhibitors, thereby opening new insights into their applications in many fields, such as pharmaceutical, cosmetic and food industries. This review summarises the current knowledge on plant-derived natural products with MMP-modulating activities. Most of the reviewed plant-derived products exhibit an inhibitory activity on MMPs. Amongst MMPs, MMP-2 and MMP-9 are the most studied. The expression of MMPs is inhibited through respective signalling pathways, such as MAPK, NF-κB and PI3 kinase pathways, which contribute to the reduction in cancer cell behaviours, such as proliferation and migration. Most studies have employed in vitro models, but a limited number of animal studies and clinical trials have been conducted. Even though plant-derived products show promising results in modulating MMPs, more in vivo studies and clinical trials are needed to support their therapeutic applications in the future.

scholarly journals Stage-dependent effect of deferoxamine on growth of Plasmodium falciparum in vitro

Blood ◽  
1990 ◽  
Vol 76 (6) ◽  
pp. 1250-1255 ◽  
Author(s):  
S Whitehead ◽  
TE Peto
Keyword(s):  
Plasmodium Falciparum ◽  
Growth Inhibition ◽  
Antimalarial Activity ◽  
Clinical Malaria ◽  
Inhibitory Effect ◽  
Parasite Development ◽  
And Control ◽  
Speed Of Onset

Abstract Deferoxamine (DF) has antimalarial activity that can be demonstrated in vitro and in vivo. This study is designed to examine the speed of onset and stage dependency of growth inhibition by DF and to determine whether its antimalarial activity is cytostatic or cytocidal. Growth inhibition was assessed by suppression of hypoxanthine incorporation and differences in morphologic appearance between treated and control parasites. Using synchronized in vitro cultures of Plasmodium falciparum, growth inhibition by DF was detected within a single parasite cycle. Ring and nonpigmented trophozoite stages were sensitive to the inhibitory effect of DF but cytostatic antimalarial activity was suggested by evidence of parasite recovery in later cycles. However, profound growth inhibition, with no evidence of subsequent recovery, occurred when pigmented trophozoites and early schizonts were exposed to DF. At this stage in parasite development, the activity of DF was cytocidal and furthermore, the critical period of exposure may be as short as 6 hours. These observations suggest that iron chelators may have a role in the treatment of clinical malaria.

scholarly journals Human Saliva-Mediated Hydrolysis of Eugenyl-β-D-Glucoside and Fluorescein-di-β-D-Glucoside in In Vivo and In Vitro Models

Biomolecules ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 172
Author(s):  
Mariusz Dziadas ◽  
Adam Junka ◽  
Henryk Jeleń
Keyword(s):  
Oral Cavity ◽  
Control Sample ◽  
Rapid Test ◽  
Human Saliva ◽  
In Vitro Models ◽  
Microbial Hydrolysis ◽  
Amoxicillin Trihydrate ◽  
Potassium Clavulanate

Eugenyl-β-D-glucopyranoside, also referred to as Citrusin C, is a natural glucoside found among others in cloves, basil and cinnamon plants. Eugenol in a form of free aglycone is used in perfumeries, flavourings, essential oils and in medicinal products. Synthetic Citrusin C was incubated with human saliva in several in vitro models together with substrate-specific enzyme and antibiotics (clindamycin, ciprofloxacin, amoxicillin trihydrate and potassium clavulanate). Citrusin C was detected using liquid chromatography with tandem mass spectrometry (LC-MS/MS). Citrusin C was completely degraded only when incubated with substrate-specific A. niger glucosidase E.C 3.2.1.21 (control sample) and when incubated with human saliva (tested sample). The addition of antibiotics to the above-described experimental setting, stopped Citrusin C degradation, indicating microbiologic origin of hydrolysis observed. Our results demonstrate that Citrusin C is subjected to complete degradation by salivary/oral cavity microorganisms. Extrapolation of our results allows to state that in the human oral cavity, virtually all β-D-glucosides would follow this type of hydrolysis. Additionally, a new method was developed for an in vivo rapid test of glucosidase activity in the human mouth on the tongue using fluorescein-di-β-D-glucoside as substrate. The results presented in this study serve as a proof of concept for the hypothesis that microbial hydrolysis path of β-D-glucosides begins immediately in the human mouth and releases the aglycone directly into the gastrointestinal tract.

Agitation Techniques to Enhance Drainage of Retained Hemothorax

2020 ◽  
pp. 155335062097800
Author(s):  
Ian A. Makey ◽  
Nitin A. Das ◽  
Samuel Jacob ◽  
Magdy M. El-Sayed Ahmed ◽  
Colleen M. Makey ◽  
...  
Keyword(s):  
Trauma Surgery ◽  
Control Group ◽  
In Vivo Experiments ◽  
Vibration Technique ◽  
Retained Hemothorax ◽  
And Control ◽  
Negative Conclusion ◽  
Benchtop Model

Background. Retained hemothorax (RH) is a common problem in cardiothoracic and trauma surgery. We aimed to determine the optimum agitation technique to enhance thrombus dissolution and drainage and to apply the technique to a porcine-retained hemothorax. Methods. Three agitation techniques were tested: flush irrigation, ultrasound, and vibration. We used the techniques in a benchtop model with tissue plasminogen activator (tPA) and pig hemothorax with tPA. We used the most promising technique vibration in a pig hemothorax without tPA. Statistics. We used 2-sample t tests for each comparison and Cohen d tests to calculate effect size (ES). Results. In the benchtop model, mean drainages in the agitation group and control group and the ES were flush irrigation, 42%, 28%, and 2.91 ( P = .10); ultrasound, 35%, 27%, and .76 ( P = .30); and vibration, 28%, 19%, and 1.14 ( P = .04). In the pig hemothorax with tPA, mean drainages and the ES of each agitation technique compared with control (58%) were flush irrigation, 80% and 1.14 ( P = .37); ultrasound, 80% and 2.11 ( P = .17); and vibration, 95% and 3.98 ( P = .06). In the pig hemothorax model without tPA, mean drainages of the vibration technique and control group were 50% and 43% (ES = .29; P = .65). Discussion. In vitro studies suggested flush irrigation had the greatest effect, whereas only vibration was significantly different vs the respective controls. In vivo with tPA, vibration showed promising but not statistically significant results. Results of in vivo experiments without tPA were negative. Conclusion. Agitation techniques, in combination with tPA, may enhance drainage of hemothorax.

Sign in / Sign up

Export Citation Format

Share Document