Internal Resonance of Plane Waves in Nonlinear Lattices

2019 ◽  
Author(s):  
Matthew D. Fronk ◽  
Michael J. Leamy
Keyword(s):  
Internal Resonance ◽  
Energy Exchange ◽  
New Technology ◽  
Signal Transmission ◽  
Equations Of Motion ◽  
Plane Waves ◽  
Local Analysis ◽  
Internal Resonances ◽  
Single Wave ◽  
Direct Numerical Integration

Abstract Recent studies have employed perturbation techniques to derive amplitude-dependent band structures in nonlinear periodic materials. The associated applications include amplitude-dependent filters, waveguides, and diodes. However, for a range of frequencies and wavenumbers, perturbation-based dispersion corrections for a single wave break-down due to internal resonance between the primary wave and its nonlinearity-induced higher-harmonics. This work presents a perturbation analysis of one-dimensional plane waves in lattices with internal resonances. The exchange of energy between propagating modes within the same branch of the lattice’s band structure is considered, and the stability of the energy exchange is assessed through a local analysis. Direct numerical integration of the lattice equations of motion validates the analytical expressions for energy exchange. These findings can be used to resolve discontinuities in band diagrams that do not account for internal resonances and may inspire new technology that enables long-range coherent signal transmission in nonlinear media.

Multimode Interactions in Suspended Cables

2002 ◽  
Vol 8 (3) ◽  
pp. 337-387 ◽  
Author(s):  
Ali H. Nayfeh ◽  
Haider N. Arafat ◽  
Char-Ming Chin ◽  
Walter Lacarbonara
Keyword(s):  
Internal Resonance ◽  
Multiple Scales ◽  
Equations Of Motion ◽  
Primary Resonance ◽  
Internal Resonances ◽  
Out Of Plane ◽  
Space Formulation ◽  
Suspended Cables ◽  
One To One ◽  
Plane Mode

We investigate the nonlinear nonplanar responses of suspended cables to external excitations. The equations of motion governing such systems contain quadratic and cubic nonlinearities, which may result in two-to-one and one-to-one internal resonances. The sag-to-span ratio of the cable considered is such that the natural frequency of the first symmetric in-plane mode is at first crossover. Hence, the first symmetric in-plane mode is involved in a one-to-one internal resonance with the first antisymmetric in-plane and out-of-plane modes and, simultaneously, in a two-to-one internal resonance with the first symmetric out-of-plane mode. Under these resonance conditions, we analyze the response when the first symmetric in-plane mode is harmonically excited at primary resonance. First, we express the two governing equations of motion as four first-order (i.e., state-space formulation) partial-differential equations. Then, we directly apply the methods of multiple scales and reconstitution to determine a second-order uniform asymptotic expansion of the solution, including the modulation equations governing the dynamics of the phases and amplitudes of the interacting modes. Then, we investigate the behavior of the equilibrium and dynamic solutions as the forcing amplitude and resonance detunings are slowly varied and determine the bifurcations they may undergo.

scholarly journals Nonlinear interactions in deformable container cranes

2015 ◽  
Vol 230 (1) ◽  
pp. 5-20 ◽  
Author(s):  
Andrea Arena ◽  
Walter Lacarbonara ◽  
Matthew P Cartmell
Keyword(s):  
Rigid Body ◽  
Internal Resonance ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Higher Order ◽  
Mode Shapes ◽  
Lagrange Equations ◽  
Internal Resonances ◽  
Container Cranes ◽  
Bending Mode

Nonlinear dynamic interactions in harbour quayside cranes due to a two-to-one internal resonance between the lowest bending mode of the deformable boom and the in-plane pendular mode of the container are investigated. To this end, a three-dimensional model of container cranes accounting for the elastic interaction between the crane boom and the container dynamics is proposed. The container is modelled as a three-dimensional rigid body elastically suspended through hoisting cables from the trolley moving along the crane boom modelled as an Euler-Bernoulli beam. The reduced governing equations of motion are obtained through the Euler-Lagrange equations employing the boom kinetic and stored energies, derived via a Galerkin discretisation based on the mode shapes of the two-span crane boom used as trial functions, and the kinetic and stored energies of the rigid body container and the elastic hoisting cables. First, conditions for the onset of internal resonances between the boom and the container are found. A higher order perturbation treatment of the Taylor expanded equations of motion in the neighbourhood of a two-to-one internal resonance between the lowest boom bending mode and the lowest pendular mode of the container is carried out. Continuation of the fixed points of the modulation equations together with stability analysis yields a rich bifurcation behaviour, which features Hopf bifurcations. It is shown that consideration of higher order terms (cubic nonlinearities) beyond the quadratic geometric and inertia nonlinearities breaks the symmetry of the bifurcation equations, shifts the bifurcation points and the stability ranges, and leads to bifurcations not predicted by the low order analysis.

Internal Resonance and Nonlinear Vibrations of Eccentric Rotating Composite Laminated Circular Cylindrical Shell

2019 ◽  
Author(s):  
Tao Liu ◽  
Wei Zhang ◽  
Yan Zheng ◽  
Yufei Zhang
Keyword(s):  
Cylindrical Shell ◽  
Differential Equations ◽  
Internal Resonance ◽  
Nonlinear Vibrations ◽  
Multiple Scales ◽  
Circular Cylindrical Shell ◽  
Equations Of Motion ◽  
Nonlinear Partial Differential Equations ◽  
Shear Deformation Theory ◽  
Internal Resonances

Abstract This paper is focused on the internal resonances and nonlinear vibrations of an eccentric rotating composite laminated circular cylindrical shell subjected to the lateral excitation and the parametric excitation. Based on Love thin shear deformation theory, the nonlinear partial differential equations of motion for the eccentric rotating composite laminated circular cylindrical shell are established by Hamilton’s principle, which are derived into a set of coupled nonlinear ordinary differential equations by the Galerkin discretization. The excitation conditions of the internal resonance is found through the Campbell diagram, and the effects of eccentricity ratio and geometric papameters on the internal resonance of the eccentric rotating system are studied. Then, the method of multiple scales is employed to obtain the four-dimensional nonlinear averaged equations in the case of 1:2 internal resonance and principal parametric resonance-1/2 subharmonic resonance. Finally, we study the nonlinear vibrations of the eccentric rotating composite laminated circular cylindrical shell systems.

scholarly journals Nonlinear Dynamic Response of Functionally Graded Rectangular Plates under Different Internal Resonances

2010 ◽  
Vol 2010 ◽  
pp. 1-12 ◽  
Author(s):  
Y. X. Hao ◽  
W. Zhang ◽  
X. L. Ji
Keyword(s):  
Dynamic Response ◽  
Nonlinear Dynamic ◽  
Internal Resonance ◽  
Plate Theory ◽  
Equations Of Motion ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Internal Resonances ◽  
Third Order ◽  
Nonlinear Dynamic Response

The nonlinear dynamic response of functionally graded rectangular plates under combined transverse and in-plane excitations is investigated under the conditions of 1 : 1, 1 : 2 and 1 : 3 internal resonance. The material properties are assumed to be temperature-dependent and vary along the thickness direction. The thermal effect due to one-dimensional temperature gradient is included in the analysis. The governing equations of motion for FGM rectangular plates are derived by using Reddy's third-order plate theory and Hamilton's principle. Galerkin's approach is utilized to reduce the governing differential equations to a two-degree-of-freedom nonlinear system including quadratic and cubic nonlinear terms, which are then solved numerically by using 4th-order Runge-Kutta algorithm. The effects of in-plane excitations on the internal resonance relationship and nonlinear dynamic response of FGM plates are studied.

Internal Resonance Analysis for Electromechanical Integrated Toroidal Drive

2010 ◽  
Vol 5 (4) ◽  
Author(s):  
Xiuhong Hao Lizhong Xu
Keyword(s):  
Free Vibration ◽  
Internal Resonance ◽  
Energy Exchange ◽  
Forced Response ◽  
Drive System ◽  
Design Stage ◽  
Internal Resonances ◽  
Resonance Analysis ◽  
Electromechanical Integrated ◽  
Electromechanical Coupled

In this paper, the electromechanical coupled nonlinear equations for the electromechanical integrated toroidal drive are proposed. Using the equations, the free vibration and forced response under internal resonance are investigated. The effects of the drive parameters on the resonance are investigated. Three different resonance types exist for the different drive parameters. They are the normal resonance, internal resonance, and jump vibration between the normal and internal resonances. Compared with the normal resonance without internal resonance, the internal resonance has a large amplitude and the energy exchange occurs between the vibrations of the different components. The resonance types of the drive system are dependent on the electromechanical parameters of the drive system. In the design stage, one can select properly the electromechanical parameters of the drive system to remove the internal resonance and the jump vibration.

A Semi-Analytical Method for Calculation of Strongly Nonlinear Normal Modes of Mechanical Systems

2018 ◽  
Vol 13 (4) ◽  
Author(s):  
S. Mahmoudkhani
Keyword(s):  
Internal Resonance ◽  
Degrees Of Freedom ◽  
Numerical Solutions ◽  
Equations Of Motion ◽  
Normal Modes ◽  
Nonlinear Normal Modes ◽  
Internal Resonances ◽  
Oscillatory Systems ◽  
Nonlinear Normal ◽  
Quadratic And Cubic Nonlinearities

A new scheme based on the homotopy analysis method (HAM) is developed for calculating the nonlinear normal modes (NNMs) of multi degrees-of-freedom (MDOF) oscillatory systems with quadratic and cubic nonlinearities. The NNMs in the presence of internal resonances can also be computed by the proposed method. The method starts by approximating the solution at the zeroth-order, using some few harmonics, and proceeds to higher orders to improve the approximation by automatically including higher harmonics. The capabilities and limitations of the method are thoroughly investigated by applying them to three nonlinear systems with different nonlinear behaviors. These include a two degrees-of-freedom (2DOF) system with cubic nonlinearities and one-to-three internal resonance that occurs on nonlinear frequencies at high amplitudes, a 2DOF system with quadratic and cubic nonlinearities having one-to-two internal resonance, and the discretized equations of motion of a cylindrical shell. The later one has internal resonance of one-to-one. Moreover, it has the symmetry property and its DOFs may oscillate with phase difference of 90 deg, leading to the traveling wave mode. In most cases, the estimated backbone curves are compared by the numerical solutions obtained by continuation of periodic orbits. The method is found to be accurate for reasonably high amplitude vibration especially when only cubic nonlinearities are present.

Effects of nonlinear interactions of flexural modes on the performance of a beam autoparametric vibration absorber

2019 ◽  
Vol 26 (7-8) ◽  
pp. 459-474
Author(s):  
Saeed Mahmoudkhani ◽  
Hodjat Soleymani Meymand
Keyword(s):  
Frequency Response ◽  
Internal Resonance ◽  
Continuation Method ◽  
Harmonic Balance Method ◽  
Vibration Absorber ◽  
Primary System ◽  
Lumped Mass ◽  
Response Curves ◽  
Internal Resonances ◽  
The One

The performance of the cantilever beam autoparametric vibration absorber with a lumped mass attached at an arbitrary point on the beam span is investigated. The absorber would have a distinct feature that in addition to the two-to-one internal resonance, the one-to-three and one-to-five internal resonances would also occur between flexural modes of the beam by tuning the mass and position of the lumped mass. Special attention is paid on studying the effect of these resonances on increasing the effectiveness and extending the range of excitation amplitudes at which the autoparametric vibration absorber remains effective. The problem is formulated based on the third-order nonlinear Euler–Bernoulli beam theory, where the assumed-mode method is used for deriving the discretized equations of motion. The numerical continuation method is then applied to obtain the frequency response curves and detect the bifurcation points. The harmonic balance method is also employed for detecting the type of internal resonances between flexural modes by inspecting the frequency response curves corresponding to different harmonics of the response. Parametric studies on the performance of the absorber are conducted by varying the position and mass of the lumped mass, while the frequency ratio of the primary system to the first mode of the beam is kept equal to two. Results indicated that the one-to-five internal resonance is especially responsible for the considerable enhancement of the performance.

scholarly journals Tuning nonlinear damping in graphene nanoresonators by parametric–direct internal resonance

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ata Keşkekler ◽  
Oriel Shoshani ◽  
Martin Lee ◽  
Herre S. J. van der Zant ◽  
Peter G. Steeneken ◽  
...  
Keyword(s):  
Parametric Resonance ◽  
Internal Resonance ◽  
Microscopic Theory ◽  
Fold Increase ◽  
Nonlinear Damping ◽  
Supporting Evidence ◽  
Nonlinear Dissipation ◽  
Modal Interactions ◽  
Solid State Physics ◽  
Internal Resonances

AbstractMechanical sources of nonlinear damping play a central role in modern physics, from solid-state physics to thermodynamics. The microscopic theory of mechanical dissipation suggests that nonlinear damping of a resonant mode can be strongly enhanced when it is coupled to a vibration mode that is close to twice its resonance frequency. To date, no experimental evidence of this enhancement has been realized. In this letter, we experimentally show that nanoresonators driven into parametric-direct internal resonance provide supporting evidence for the microscopic theory of nonlinear dissipation. By regulating the drive level, we tune the parametric resonance of a graphene nanodrum over a range of 40–70 MHz to reach successive two-to-one internal resonances, leading to a nearly two-fold increase of the nonlinear damping. Our study opens up a route towards utilizing modal interactions and parametric resonance to realize resonators with engineered nonlinear dissipation over wide frequency range.

LOCAL ANALYSIS BY WAVELETS VERSUS NONLOCAL FOURIER ANALYSIS

2007 ◽  
Vol 05 (01n02) ◽  
pp. 89-95
Author(s):  
J. R. CROCA
Keyword(s):  
Quantum Mechanics ◽  
Fourier Analysis ◽  
Quantum Physics ◽  
Plane Waves ◽  
Local Analysis ◽  
Mathematical Tool ◽  
Space Harmonic ◽  
New Approach ◽  
Spatial Frequencies ◽  
Temporal And Spatial

Orthodox quantum mechanics has another implicit postulate stating that temporal and spatial frequencies of the Planck–Einstein and de Broglie formulas can only be linked with the infinite, in time and space, harmonic plane waves of Fourier analysis. From this assumption, nonlocality either in space and time follows directly. This is what is called Fourier Ontology. In order to build nonlinear causal and local quantum physics, it is necessary to reject Fourier ontology and accept that in certain cases a finite wave may have a well defined frequency. Now the mathematical tool to describe this new approach is wavelet local analysis. This more general nonlinear local and causal quantum physics, in the limit of the linear approximation, contains formally orthodox quantum mechanics as a particular case.

scholarly journals Parametric and Internal Resonances of an Axially Moving Beam with Time-Dependent Velocity

2013 ◽  
Vol 2013 ◽  
pp. 1-18 ◽  
Author(s):  
Bamadev Sahoo ◽  
L. N. Panda ◽  
G. Pohit
Keyword(s):  
Internal Resonance ◽  
Multiple Scales ◽  
Time History ◽  
Mean Value ◽  
Phase Portraits ◽  
Axially Moving Beam ◽  
Internal Resonances ◽  
Moving Beam ◽  
Axially Moving ◽  
The Stability

The nonlinear vibration of a travelling beam subjected to principal parametric resonance in presence of internal resonance is investigated. The beam velocity is assumed to be comprised of a constant mean value along with a harmonically varying component. The stretching of neutral axis introduces geometric cubic nonlinearity in the equation of motion of the beam. The natural frequency of second mode is approximately three times that of first mode; a three-to-one internal resonance is possible. The method of multiple scales (MMS) is directly applied to the governing nonlinear equations and the associated boundary conditions. The nonlinear steady state response along with the stability and bifurcation of the beam is investigated. The system exhibits pitchfork, Hopf, and saddle node bifurcations under different control parameters. The dynamic solutions in the periodic, quasiperiodic, and chaotic forms are captured with the help of time history, phase portraits, and Poincare maps showing the influence of internal resonance.

Sign in / Sign up

Export Citation Format

Share Document