scholarly journals Topological Design of an Asymmetric 3-Translational Parallel Mechanism With Zero Coupling Degree and Motion Decoupling

2018 ◽  
Author(s):  
Huiping Shen ◽  
Chengqi Wu ◽  
Damien Chablat ◽  
Guanglei Wu ◽  
Ting-li Yang
Keyword(s):  
Parallel Mechanism ◽  
Design Theory ◽  
Analytical Formula ◽  
Inverse Kinematic ◽  
Topology Design ◽  
Kinematic Chains ◽  
Topological Design ◽  
Decoupled Motion ◽  
Topological Characteristics ◽  
Zero Coupling

In this paper a new asymmetric 3-translational (3T) parallel manipulator, i.e., RPa(3R) 2R+RPa, with zero coupling degree and decoupled motion is firstly proposed according to topology design theory of parallel mechanism (PM) based on position and orientation characteristics (POC) equations. The main topological characteristics such as POC, degree of freedom and coupling degree are calculated. Then, the analytical formula for the direct and inverse kinematic are directly derived since coupling degree of the PM is zero. The study of singular configurations is simple because of the independence of the kinematic chains.

scholarly journals A Translational Three-Degrees-of-Freedom Parallel Mechanism With Partial Motion Decoupling and Analytic Direct Kinematics

2020 ◽  
Vol 12 (2) ◽  
Author(s):  
Huiping Shen ◽  
Damien Chablat ◽  
Boxiong Zeng ◽  
Ju Li ◽  
Guanglei Wu ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Design Theory ◽  
Degrees Of Freedom ◽  
Analytic Solutions ◽  
Inverse Kinematic ◽  
Kinematic Modeling ◽  
Topological Design ◽  
Prismatic Joints ◽  
Topological Characteristics ◽  
Three Degrees Of Freedom

Abstract According to the topological design theory and the method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper studied a three-degrees-of-freedom (3-DOF) translational PM that has three advantages, i.e., (i) it consists of three fixed actuated prismatic joints, (ii) the PM has analytic solutions to the direct and inverse kinematic problems, and (iii) the PM is of partial motion decoupling property. First, the main topological characteristics, such as the POC, degree-of-freedom, and coupling degree, were calculated for kinematic modeling. Thanks to these properties, the direct and inverse kinematic problems can be readily solved. Further, the conditions of the singular configurations of the PM were analyzed, which corresponds to its partial motion decoupling property.

scholarly journals Topology Design and Analysis of a Novel 3-Translational Parallel Mechanism With Analytical Direct Position Solutions and Partial Motion Decoupling

2019 ◽  
Author(s):  
Huiping Shen ◽  
Damien Chablat ◽  
Boxiong Zeng ◽  
Ting-li Yang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Design Theory ◽  
Topology Design ◽  
One Dimensional ◽  
Topological Design ◽  
Prismatic Joints ◽  
Position And Orientation ◽  
Topological Characteristics ◽  
Singular Configuration

Abstract According to the topological design theory and method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper design a novel 3-translation (3T) PM that has three advantages, i.e., (1) it consists on three actuated prismatic joints, (2) the PM has analytical direct position solutions, and (3) the PM is of partial motion decoupling property. Firstly, the main topological characteristics such as the POC, degree of freedom and coupling degree are calculated for kinematics modelling. Due to the special constraint feature of the 3-translation, the analytical direct position solutions of the PM can be directly obtained without needing to use one-dimensional search method. Further, the conditions of the singular configuration of the PM, as well as the singularity location inside the workspace are analyzed according to the inverse kinematics.

scholarly journals Kinematic design of a translational parallel mechanism based on sub-kinematic chain determined workspace superposition

2021 ◽  
pp. 095440622110046
Author(s):  
Huiping Shen ◽  
Yinan Zhao ◽  
Guanglei Wu ◽  
Ju Li ◽  
Damien Chablat
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Chain ◽  
Inverse Kinematic ◽  
Parallel Mechanisms ◽  
Kinematic Modeling ◽  
Symbolic Model ◽  
Kinematic Design ◽  
Decoupled Motion ◽  
Topological Characteristics ◽  
Kinematic Solution

This paper presents the kinematic design of a translational parallel mechanism (PM) named Vari-Orthoglide by means of the workspace superposition, according to the sub-kinematic chain (SKC) based PM composition principle. The main topological characteristics of the manipulator with two SKCs under study, such as the position and orientation (POC) characteristics, degree of freedom (DOF) and coupling degree are analyzed, which turns out that the coupling degree equals to 1, implying the partially decoupled motion. With the topological characteristics based kinematic modeling principle, a symbolic model of the kinematics is established to derive its symbolic direct and inverse kinematic solutions. Based upon the direct kinematic solution, the workspaces for the two SKCs can be efficiently found. Moreover, the singularity loci are identified for finding the singularity-free workspace, where a regular workspace is fitted as the task workspace as expected. The presented work shows an approach to design translational parallel mechanisms considering motion decoupling and regular workspace, applicable to other types of parallel mechanisms.

scholarly journals Type Synthesis of 1T2R Parallel Mechanisms Using Structure Coupling-Reducing Method

2019 ◽  
Vol 32 (1) ◽  
Author(s):  
Haitao Liu ◽  
Ke Xu ◽  
Huiping Shen ◽  
Xianlei Shan ◽  
Tingli Yang
Keyword(s):  
Explicit Form ◽  
Parallel Mechanism ◽  
Analytic Solutions ◽  
Forward Kinematics ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Real Time Control ◽  
Time Control ◽  
Topological Characteristics ◽  
Zero Coupling

Abstract Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms. Therefore, the type synthesis of a mechanism having explicit form of forward kinematics has become a topic of interest. Based on this purpose, this paper deals with the type synthesis of 1T2R parallel mechanisms by investigating the topological structure coupling-reducing of the 3UPS&UP parallel mechanism. With the aid of the theory of mechanism topology, the analysis of the topological characteristics of the 3UPS&UP parallel mechanism is presented, which shows that there are highly coupled motions and constraints amongst the limbs of the mechanism. Three methods for structure coupling-reducing of the 3UPS&UP parallel mechanism are proposed, resulting in eight new types of 1T2R parallel mechanisms with one or zero coupling degree. One obtained parallel mechanism is taken as an example to demonstrate that a mechanism with zero coupling degree has an explicit form for forward kinematics. The process of type synthesis is in the order of permutation and combination; therefore, there are no omissions. This method is also applicable to other configurations, and novel topological structures having simple forward kinematics can be obtained from an original mechanism via this method.

scholarly journals Design of Self-Reconfigurable Multiarm Robot Mechanism Based on Deployable Kinematic Chains

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Fu-Qun Zhao ◽  
Sheng Guo ◽  
Hai-Jun Su ◽  
Hai-Bo Qu ◽  
Ya-Qiong Chen
Keyword(s):  
Parallel Mechanism ◽  
Parallel Mechanisms ◽  
Kinematic Chains ◽  
Assembly Method ◽  
Operation Modes ◽  
Object Based ◽  
Switch Operation ◽  
Storage Area ◽  
Mechanism Theory

Abstract As the structures of multiarm robots are serially arranged, the packaging and transportation of these robots are often inconvenient. The ability of these robots to operate objects must also be improved. Addressing this issue, this paper presents a type of multiarm robot that can be adequately folded into a designed area. The robot can achieve different operation modes by combining different arms and objects. First, deployable kinematic chains (DKCs) are designed, which can be folded into a designated area and be used as an arm structure in the multiarm robot mechanism. The strategy of a platform for storing DKCs is proposed. Based on the restrictions in the storage area and the characteristics of parallel mechanisms, a class of DKCs, called base assembly library, is obtained. Subsequently, an assembly method for the synthesis of the multiarm robot mechanism is proposed, which can be formed by the connection of a multiarm robot mechanism with an operation object based on a parallel mechanism structure. The formed parallel mechanism can achieve a reconfigurable characteristic when different DKCs connect to the operation object. Using this method, two types of multiarm robot mechanisms with four DKCs that can switch operation modes to perform different tasks through autonomous combination and release operation is proposed. The obtained mechanisms have observable advantages when compared with the traditional mechanisms, including optimizing the occupied volume during transportation and using parallel mechanism theory to analyze the switching of operation modes.

scholarly journals A New Approach of Soft Joint Based on a Cable-Driven Parallel Mechanism for Robotic Applications

Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1468
Author(s):  
Luis Nagua ◽  
Carlos Relaño ◽  
Concepción A. Monje ◽  
Carlos Balaguer
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Experimental Tests ◽  
Humanoid Robots ◽  
Inverse Kinematic ◽  
Element Analysis ◽  
New Approach ◽  
Flexible Polymer ◽  
The Mathematical Model

A soft joint has been designed and modeled to perform as a robotic joint with 2 Degrees of Freedom (DOF) (inclination and orientation). The joint actuation is based on a Cable-Driven Parallel Mechanism (CDPM). To study its performance in more detail, a test platform has been developed using components that can be manufactured in a 3D printer using a flexible polymer. The mathematical model of the kinematics of the soft joint is developed, which includes a blocking mechanism and the morphology workspace. The model is validated using Finite Element Analysis (FEA) (CAD software). Experimental tests are performed to validate the inverse kinematic model and to show the potential use of the prototype in robotic platforms such as manipulators and humanoid robots.

Inverse Kinematic Solution and Dynamic Model to 3PTT Parallel Mechanism

2014 ◽  
Vol 945-949 ◽  
pp. 1421-1425
Author(s):  
Xiu Qing Hao
Keyword(s):  
Dynamic Model ◽  
Dynamic Simulation ◽  
Parallel Mechanism ◽  
Inverse Kinematic ◽  
Euler Method ◽  
Research Subject ◽  
Adams Software ◽  
Inverse Kinematic Analysis ◽  
Simulation Results ◽  
Kinematic Solution

Take typical parallel mechanism 3PTT as research subject, its inverse kinematic analysis solution was gotten. Dynamic model of the mechanism was established by Newton-Euler method, and the force and torque equations were derived. Dynamic simulation of 3PTT parallel mechanism was done by using ADAMS software, and simulation results have verified the correctness of the theoretical conclusions.

Kinematic and Workspace Modelling of a 6-PUS Parallel Mechanism

2018 ◽  
Author(s):  
Jérôme Landuré ◽  
Clément Gosselin
Keyword(s):  
Kinematic Analysis ◽  
Parallel Mechanism ◽  
Inverse Kinematic ◽  
Degree Of Freedom ◽  
Accurate Description ◽  
Transmission Ratio ◽  
Inverse Kinematic Problem ◽  
Jacobian Matrices ◽  
Six Degree Of Freedom

This article presents the kinematic analysis of a six-degree-of-freedom six-legged parallel mechanism of the 6-PUS architecture. The inverse kinematic problem is recalled and the Jacobian matrices are derived. Then, an algorithm for the geometric determination of the workspace is presented, which yields a very fast and accurate description of the workspace of the mechanism. Singular boundaries and a transmission ratio index are then introduced and studied for a set of architectural parameters. The proposed analysis yields conceptual architectures whose properties can be adjusted to fit given applications.

Design of a Four Legged Parallel Mechanism to Improve the Dexterity of Walking Robot

2009 ◽  
Author(s):  
ChiHyo Kim ◽  
KunWoo Park ◽  
TaeSung Kim ◽  
MinKi Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Topology Design ◽  
Condition Numbers ◽  
Walking Robots ◽  
Rough Terrain ◽  
Parallel Mechanisms ◽  
Walking Robot ◽  
Intermediate Mechanism

This paper designs a four legged parallel mechanism to improve the dexterity of three layered parallel walking robot. Topology design is conducted for a leg mechanism composed of four legs, base and ground, which constitute a redundant parallel mechanism. This mechanism is subdivided into four sub-mechanism composed of three legs. A motor vector is adopted to determine the 6×8 Jacobian of the redundant parallel mechanism and the 6×6 Jacobian of the sub-mechanisms, respectively. The condition number of the Jacobian matrix is used as an index to measure a dexterity. We analyze the condition numbers of the Jacobian over the positional and orientational walking space. The analytical results show that a sub-mechanism has lots of singularities within workspace but they are removed by a redundant parallel mechanism improving the dexterity. This paper presents a parallel typed walking robot to enlarge walking space and stability region. Seven types of three layered walking robots are designed by inserting an intermediate mechanism between the upper and the lower legged parallel mechanisms. They provide various types of gaits to walk rough terrain and climb over a wall with small degrees of freedom.

Sign in / Sign up

Export Citation Format

Share Document