Prototyping and Validation of a Fixed-Actuator 3-Leg 6-DOF Robot

2018 ◽  
Author(s):  
Nathan A. Jensen ◽  
Carl A. Nelson
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Mechanism Analysis ◽  
Joint Angles ◽  
Maximum Extension ◽  
Partial Derivatives ◽  
Expected Performance ◽  
Derivatives Of

While 6-leg, 6 DOF parallel robots offer advantages over serial mechanisms in many applications, they suffer from mobility limitation pertaining to both the maximum extension of links and link interference. The latter of these can be mitigated by a reduction of the number of links in the mechanism. The end-effector’s degrees of freedom are maintained by adding controllable degrees of freedom to the remaining legs. This paper presents a prototype of a previously proposed 3-leg, 6-DOF parallel robot. A measure of its workspace is also shown and compared to that of a similarly sized 6-leg parallel mechanism. Analysis of partial derivatives of Cartesian points with respect to joint angles is also explored to give a metric of expected performance in different regions of workspace.

Modelling and Simulation of a Isoglide T3R1 Parallel Robot

2010 ◽  
Vol 166-167 ◽  
pp. 457-462
Author(s):  
Dan Verdes ◽  
Radu Balan ◽  
Máthé Koppány
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Practical Implementation ◽  
Medical Robots ◽  
The Past ◽  
And Control ◽  
Workspace Design ◽  
Human Systems

Parallel robots find many applications in human-systems interaction, medical robots, rehabilitation, exoskeletons, to name a few. These applications are characterized by many imperatives, with robust precision and dynamic workspace computation as the two ultimate ones. This paper presents kinematic analysis, workspace, design and control to 3 degrees of freedom (DOF) parallel robots. Parallel robots have received considerable attention from both researchers and manufacturers over the past years because of their potential for high stiffness, low inertia and high speed capability. Therefore, the 3 DOF translation parallel robots provide high potential and good prospects for their practical implementation in human-systems interaction.

Type synthesis of coordinated multi-robot system based on parallel thought

2018 ◽  
Vol 42 (2) ◽  
pp. 164-176 ◽  
Author(s):  
Wanqiang Xi ◽  
Bai Chen ◽  
Yaoyao Wang ◽  
Feng Ju
Keyword(s):  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Type Synthesis ◽  
World Coordinate System ◽  
Coordination System ◽  
Branched Chain ◽  
Branched Chains ◽  
Multi Robot

For the synthesis of the required type about the multi-robot coordination system in industrial transportation, this paper presents a novel method in which each robot in the coordinated task is viewed as a branched chain of an equivalent parallel robot (EPR), which is converted into a problem for type synthesis of parallel robots. A theoretic method is proposed to represent the kinematic features of the mechanism’s end-effector and its position and pose in the world coordinate system. The basic concept of a robotic characteristic (C) set is given, and the corresponding algorithm is analyzed. Based on the theory of C set, the concrete steps for type synthesis of EPR are presented by analyzing the characteristics of its branched chains, and many EPR groups with end kinematic features for the C sets of the operational tasks are obtained. Then three translational (3T) operational requirements that can be extended to other degrees of freedom (DOF) are adopted, and the DOF of homogeneous and heterogeneous EPR are analyzed using screw theory. Finally the validation of the method is demonstrated by Adams, which shows that the two groups are able to complete the task.

Kinematic Analysis of a Five-Legged Mobile Robot

2010 ◽  
Author(s):  
Muhammed R. Pac ◽  
Dan O. Popa
Keyword(s):  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
The Body ◽  
Legged Robots ◽  
Upper Body ◽  
Design Changes ◽  
Robot Performance ◽  
The Impact

Legged robots are more maneuverable, and can negotiate rough terrain much better than conventional locomotion using wheels. However, since the kinematic or dynamic analysis of such robots involves closed chains, it is typically more difficult to investigate the impact of design changes, such as the number, or the design of its legs, to robot performance. Most legged robots consist of 4 legs (quadrupeds) or 6 legs (hexapods). This paper discusses the kinematic analysis of an unconventional, symmetrical 5-legged robot with 2-DOF (Degrees Of Freedom) universal joints in each leg. The analysis was carried out in order to predict the mobility of the upper body platform, and investigate the number of robot actuators needed for mobility. The product of exponentials formulation with respect to the local coordinate frames is used to describe the twists of the joints. The analysis is based on the idea that the robot body platform along with the legs can be considered instantaneously as a parallel robot manipulating the ground. Hence, the analysis can be done using the Jacobian formulation of parallel robots. Simulation results confirm the mobility analysis that the robot can have at most 3-DOF for the body and that these freedoms are coupled rotations and translations in 3D space also with a dependence on the configuration of the robot.

A Practical Fuzzy Adaptive Control Strategy for Multi-DOF Parallel Robot

2013 ◽  
Vol 347-350 ◽  
pp. 661-665 ◽  
Author(s):  
Wei Meng ◽  
Zu De Zhou ◽  
Quan Liu ◽  
Qing Song Ai
Keyword(s):  
Degrees Of Freedom ◽  
Fuzzy Inference ◽  
Control Strategies ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Medical Rehabilitation ◽  
Position Tracking ◽  
Tracking Accuracy ◽  
Compact Structure ◽  
Fuzzy Adaptive

Multiple Degrees of Freedom (DOF) parallel robots possess the advantages of being compact structure, great stiffness, stability and high accuracy, so such platforms have been widely used in application areas as diverse as the spacecraft motion simulators, radio telescopes, and medical rehabilitation devices. In this paper, after giving a brief review on the control strategies for parallel robot, a 6-DOF robot system for medical purposes based on simulation as well as real environment is established. In order to improve the position tracking accuracy for such objects with time-varying and nonlinear parameters, a practical fuzzy adaptive controller is designed based on the kinematics of parallel platform, where fuzzy inference units are utilized to modify the PID parameters in real-time by using the position feedback from the robot actuators. Finally, both virtual and actual experiment results demonstrate that the proposed algorithm is able to effectively reduce the position tracking errors compared with the traditional PID controller, and the reliability and feasibility of such parallel robotic system can also be guaranteed.

Design Optimization of 6-HTRT Parallel Robot Orientated on Workspace

2003 ◽  
Author(s):  
Hui Yu ◽  
Jinsong Wang ◽  
Guanghong Duan ◽  
Lining Sun
Keyword(s):  
Design Optimization ◽  
Motion Control ◽  
Parallel Mechanism ◽  
Optimization Design ◽  
Optimization Method ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Objective Functions ◽  
Restriction Factors

In this paper an optimization method based on the Mechanics of Parallel Robots and orientated on workspace is conducted in the construction of 6-HTRT parallel robot. By analyzing the characteristics of specific workspace and setting up objective functions, optimizations are implemented on the design of parallel robot. As a result of the optimization design, the parallel robot not only figures the minimum overall size of robot structural, but also has workspace unrestricted by the limit range of Hooke joint’s conical angles. The restriction factors on workspace of 6-HTRT parallel robot are reduced thus the algorithm for motion control of the robot is simplified and the performance of the parallel mechanism is improved.

DeltaBot: A New Cable-Based Ultra High Speed Robot

2003 ◽  
Author(s):  
Saeed Behzadipour ◽  
Robert Dekker ◽  
Amir Khajepour ◽  
Edmon Chan
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Manufacturing Industry ◽  
Design Procedure ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Manufacturing Cost ◽  
End Effector ◽  
Serial Manipulators

The growing needs for high speed positioning devices in the automated manufacturing industry have been challenged by robotic science for more than two decades. Parallel manipulators have been widely used for this purpose due to their advantage of lower moving inertia over the conventional serial manipulators. Cable actuated parallel robots were introduced in 1980’s to reduce the moving inertia even further. In this work, a new cable-based parallel robot is introduced. For this robot, the cables are used not only to actuate the end-effector but also to apply the necessary kinematic constraints to provide three pure translational degrees of freedom. In order to maintain tension in the cables, a passive air cylinder is used to push the end-effector against the stationary platform. In addition to low moving inertia, the new design benefits from simplicity and low manufacturing cost by eliminating joints from the robot’s mechanism. The design procedure and the results of experiments will be discussed in the following.

The Manta and the Kanuk: Novel 4-DOF Parallel Mechanisms for Industrial Handling

1999 ◽  
Author(s):  
Luc H. Rolland
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Chain ◽  
Parallel Robot ◽  
Chain Structure ◽  
Parallel Robots ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Low Mass ◽  
Loading And Unloading ◽  
Very High

Abstract Two novel 4-DOF very fast parallel robots were designed. This paper introduces the new parallel mechanism designs which are named the Manta and the Kanuk. In order to reduce manipulator overall costs, the actuator and encoder numbers are minimized to the exact effective degrees-of-freedoms (DOF) which is usually not the case in most parallel robot designs. The robots allow end-effector displacements along the three Cartesian translations and one platform transversal rotation. The two remaining rotations are blocked by the intrinsic mechanical structure including the rotation along the platform normal which is always limited in range. The main advantages are high stiffness through the multiple kinematic chain structure which allow for low mass designs. Moreover, they feature simple mechanical construction. Thus, it shall be possible to achieve very high throughput since high accelerations are feasible. To circumvent the known workspace limitations, the actuators were selected to be prismatic along linear axes. The applications are automated warehouse manipulation, mediatheque manipulation, machine tool tool changers, loading and unloading.

scholarly journals Modeling Parallel Robot Kinematics for 3T2R and 3T3R Tasks Using Reciprocal Sets of Euler Angles

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 68 ◽  
Author(s):  
Moritz Schappler ◽  
Svenja Tappe ◽  
Tobias Ortmaier
Keyword(s):  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Robot Kinematics ◽  
Euler Angles ◽  
Gradient Descent Algorithm ◽  
Kinematic Models ◽  
Rotational Degrees Of Freedom ◽  
Definition Of

Industrial manipulators and parallel robots are often used for tasks, such as drilling or milling, that require three translational, but only two rotational degrees of freedom (“3T2R”). While kinematic models for specific mechanisms for these tasks exist, a general kinematic model for parallel robots is still missing. This paper presents the definition of the rotational component of kinematic constraints equations for parallel robots based on two reciprocal sets of Euler angles for the end-effector orientation and the orientation residual. The method allows completely removing the redundant coordinate in 3T2R tasks and to solve the inverse kinematics for general serial and parallel robots with the gradient descent algorithm. The functional redundancy of robots with full mobility is exploited using nullspace projection.

Six degrees of freedom parallel robots with C5 links

Robotica ◽  
1992 ◽  
Vol 10 (1) ◽  
pp. 35-44 ◽  
Author(s):  
Y. Amirat ◽  
F. Artigue ◽  
J. Pontnau
Keyword(s):  
Automotive Industry ◽  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Parallel Architecture ◽  
Parallel Robot ◽  
Parallel Architectures ◽  
Parallel Robots ◽  
Left Hand ◽  
Six Degrees Of Freedom ◽  
Assembly Tasks

SummaryThis paper presents at first a static and kinematic analysis of closed chains mechanisms which permits to deduce different possible fully parallel architectures. Then we focus on a particular parallel architecture with C5 links designed to perform precise assembly tasks. A general modeling of this C5 parallel robot is presented. Two typical assembly tasks in the automotive industry are also proposed; the first one uses the C5 links parallel robot as a left-hand device, while the second one uses it as the terminal tool of a sequential manipulator.

Sign in / Sign up

Export Citation Format

Share Document