A Simple Computational Tool for Studying Acoustic Waves in Nonlinear Medium

Author(s):  
Nirmal J. Nair ◽  
Utsav Shah

The behaviour of acoustic waves in nonlinear medium is well established in literature. But there is a need of a simple computational tool through which practical problems pertaining to nonlinear acoustics can be treated with minimum effort and expense. Additionally, visualization of nonlinear acoustic waves can be useful towards the applications of acoustic diodes and ultrasonic waves. To address this issue, we have developed a numerical scheme which effectively captures the self-distortion mechanism of acoustic wave in nonlinear medium and the consequential generation of higher harmonics. Additionally, the effects of increasing non-linearity constant of the medium and amplitude of sound waves on distortion of the waveform is studied.

1974 ◽  
Vol 52 (17) ◽  
pp. 1726-1730 ◽  
Author(s):  
S. S. Mathur ◽  
M. S. Sagoo

The difference in the behavior of the denser and the rarer regions of a longitudinal travelling acoustic wave is utilized to produce the phenomenon of rectification of ultrasonic waves. It has been shown that, under appropriate conditions, the energy density of sound in the regions of rarefaction can be increased while in the regions of compression the energy density is decreased. It is found that under suitable conditions, the pressure amplitude in the rarer regions is about 4% larger than that in the denser regions. The measurement of this difference in amplitude can be used to determine the parameter of nonlinearity.


2006 ◽  
Vol 14 (02) ◽  
pp. 143-156 ◽  
Author(s):  
CHRISTIAN VANHILLE ◽  
CLEOFÉ CAMPOS-POZUELO

Applications of high-amplitude acoustic or ultrasonic waves in industrial processing require a good knowledge of the nonlinear pressure field, as well as the heat produced by the wave. In this article a new time-domain algorithm solving a second-order nonlinear wave equation written in Lagrangian coordinates and valid for any fluid is presented. The new model is compared with two others which were previously developed, corresponding to the two other possible physical approaches. This paper discusses the limits of application of every approach and the suitability of every one to model nonlinear acoustic waves in resonators. Conclusions about the applicability of the physical models are given. The time-domain character of the models allows the development of a new algorithm to calculate the temperature evolution inside a resonator due to acoustic losses. This algorithm is presented here and applied to strongly nonlinear waves for which the nonlinear attenuation is dominant. Several kinds of time functions for excitation can be considered in the models. The strongly nonlinear resonator response to a short pulsed signal is analyzed to show the efficiency of the time-domain numerical model.


2019 ◽  
Vol 872 ◽  
pp. 849-888 ◽  
Author(s):  
Carlos G. Hernández ◽  
Xuesong Wu

In this paper, we investigate the receptivity of a supersonic boundary layer to impinging acoustic waves. Unlike previous studies of acoustic receptivity, where the sound waves have phase speeds comparable with or larger than the free-stream velocity $U_{\infty }$, the acoustic waves here have much slower ($O(R^{-1/8}U_{\infty })$) phase velocity, and their characteristic wavelength and frequency are of $O(R^{-3/8}L)$ and $O(R^{1/4}U_{\infty }/L)$ respectively, compatible with the triple-deck structure, where $L$ is the distance to the leading edge and $R$ the Reynolds number based on $L$ and $U_{\infty }$. A significant feature of a sound wave on the triple-deck scale is that an $O(\unicode[STIX]{x1D700}_{s})$ perturbation in the free stream generates much stronger ($O(\unicode[STIX]{x1D700}_{s}R^{1/8})$) velocity fluctuations in the boundary layer. Two receptivity mechanisms are considered. The first is new, involving the interaction of two such acoustic waves and operating in a boundary layer over a smooth wall. The second involves the interaction between an acoustic wave and the steady perturbation induced by a wavy wall. The sound–sound, or sound–roughness, interactions generate a forcing in resonance with a neutral Tollmien–Schlichting (T–S) wave. The latter is thus excited near the lower branch of the neutral curve, and subsequently undergoes exponential amplification. The excitation through sound–sound interaction may offer a possible explanation for the appearance of instability modes downstream of their neutral locations as was observed in a supersonic boundary layer over a smooth wall. The triple-deck formalism is adopted to describe impingement and reflection of the acoustic waves, and ensuing receptivity, allowing the coupling coefficient to be calculated. The two receptivity processes with the acoustic waves on the triple-deck scale are much more effective compared with those involving usual sound waves, with the coupling coefficient being greater by a factor of $O(R^{1/4})$ and $O(R^{1/8})$ in the sound–sound and sound–roughness interactions, respectively. A parametric study for both the reflection and coupling coefficients is conducted for representative T–S waves, to assess the influence of the streamwise and spanwise wavenumbers, and the phase speed (or frequency) of the acoustic wave.


2017 ◽  
Vol 35 (1) ◽  
pp. 53-70 ◽  
Author(s):  
Yuriy G. Rapoport ◽  
Oleg K. Cheremnykh ◽  
Volodymyr V. Koshovy ◽  
Mykola O. Melnik ◽  
Oleh L. Ivantyshyn ◽  
...  

Abstract. We develop theoretical basics of active experiments with two beams of acoustic waves, radiated by a ground-based sound generator. These beams are transformed into atmospheric acoustic gravity waves (AGWs), which have parameters that enable them to penetrate to the altitudes of the ionospheric E and F regions where they influence the electron concentration of the ionosphere. Acoustic waves are generated by the ground-based parametric sound generator (PSG) at the two close frequencies. The main idea of the experiment is to design the output parameters of the PSG to build a cascade scheme of nonlinear wave frequency downshift transformations to provide the necessary conditions for their vertical propagation and to enable penetration to ionospheric altitudes. The PSG generates sound waves (SWs) with frequencies f1 = 600 and f2 = 625 Hz and large amplitudes (100–420 m s−1). Each of these waves is modulated with the frequency of 0.016 Hz. The novelty of the proposed analytical–numerical model is due to simultaneous accounting for nonlinearity, diffraction, losses, and dispersion and inclusion of the two-stage transformation (1) of the initial acoustic waves to the acoustic wave with the difference frequency Δf = f2 − f1 in the altitude ranges 0–0.1 km, in the strongly nonlinear regime, and (2) of the acoustic wave with the difference frequency to atmospheric acoustic gravity waves with the modulational frequency in the altitude ranges 0.1–20 km, which then reach the altitudes of the ionospheric E and F regions, in a practically linear regime. AGWs, nonlinearly transformed from the sound waves, launched by the two-frequency ground-based sound generator can increase the transparency of the ionosphere for the electromagnetic waves in HF (MHz) and VLF (kHz) ranges. The developed theoretical model can be used for interpreting an active experiment that includes the PSG impact on the atmosphere–ionosphere system, measurements of electromagnetic and acoustic fields, study of the variations in ionospheric transparency for the radio emissions from galactic radio sources, optical measurements, and the impact on atmospheric aerosols. The proposed approach can be useful for better understanding the mechanism of the acoustic channel of seismo-ionospheric coupling.


This paper is concerned with the nonlinear propagation of sound waves from spherical or cylindrical sinusoidal sources. This problem is governed by the two dimensionless parameters ε and R 0 , and we seek asymptotic expansions valid uniformly in ε , R 0 (as well as in space-time) away from the irreducible domain where both ε and R 0 are of order unity. Various matching asymptotic domains of the parameter plane are defined and in each domain the space-time asymptotic structure is given: in many cases the leading term can actually be solved for analytically. Finally, the application of the results for spherical waves to the important problem of nonlinear acoustic beam spreading are discussed.


Micromachines ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 10
Author(s):  
Alexander Kukaev ◽  
Dmitry Lukyanov ◽  
Denis Mikhailenko ◽  
Daniil Safronov ◽  
Sergey Shevchenko ◽  
...  

Originally, sensors based on surface acoustic waves are fabricated using photolithography, which becomes extremely expensive when a small series or even single elements are needed for the research. A laser thin film local evaporation technique is proposed to substitute the photolithography process in the production of surface acoustic wave based inertial sensors prototypes. To estimate its potential a prototype of a surface acoustic wave gyroscope sensing element was fabricated and tested. Its was shown that the frequency mismatch is no more than 1%, but dispersion of the wave on small inertial masses leads to a spurious parasitic signal on receiving electrodes. Possible ways of its neglecting is discussed.


Mathematics ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1309
Author(s):  
P. R. Gordoa ◽  
A. Pickering

We consider the problem of the propagation of high-intensity acoustic waves in a bubble layer consisting of spherical bubbles of identical size with a uniform distribution. The mathematical model is a coupled system of partial differential equations for the acoustic pressure and the instantaneous radius of the bubbles consisting of the wave equation coupled with the Rayleigh–Plesset equation. We perform an analytic analysis based on the study of Lie symmetries for this system of equations, concentrating our attention on the traveling wave case. We then consider mappings of the resulting reductions onto equations defining elliptic functions, and special cases thereof, for example, solvable in terms of hyperbolic functions. In this way, we construct exact solutions of the system of partial differential equations under consideration. We believe this to be the first analytic study of this particular mathematical model.


Wave Motion ◽  
2013 ◽  
Vol 50 (2) ◽  
pp. 191-196 ◽  
Author(s):  
A. Radostin ◽  
V. Nazarov ◽  
S. Kiyashko

2021 ◽  
Author(s):  
SeHyuk Park ◽  
Hamad Alnuaimi ◽  
Anna Hayes ◽  
Madison Sitkiewicz ◽  
Umar Amjad ◽  
...  

Abstract Guided acoustic wave based techniques have been found to be very effective for damage detection, and both quantitative and qualitative characterization of materials. In this research, guided acoustic wave techniques are used for porosity evaluation of additively manufactured materials. A metal 3D printer, Concept Laser Mlab 200 R Cusing™, is used to manufacture 316L additively manufactured (AM) stainless steel specimens. Two levels of porosity are investigated in this study, which was controlled by a suitable combination of scan speed and laser power. The sample with lower level of porosity is obtained with a low scanning speed. Lead Zirconate Titanate (PZT) transducers are used to generate guided acoustic waves. The signal is excited and propagated through the specimens in a single sided transmission mode setup. Signal processing of the recorded signals for damage analysis involves both linear and nonlinear analyses. Linear ultrasonic parameters such as the time-of-flight and magnitude of the propagating waves are recorded. The nonlinear ultrasonic parameter, the Sideband Peak Count Index (SPC-I) is obtained by a newly developed nonlinear analysis technique. Results obtained for both specimens are analyzed and compared using both linear and nonlinear ultrasonic techniques. Finally, the effectiveness of SPC-I technique in monitoring porosity levels in AM specimens is discussed.


2021 ◽  
Author(s):  
Jesus Manuel Felix Servin ◽  
Hala A. Al-Sadeg ◽  
Amr Abdel-Fattah

Abstract Tracers are practical tools to gather information about the subsurface fluid flow in hydrocarbon reservoirs. Typical interwell tracer tests involve injecting and producing tracers from multiple wells to evaluate important parameters such as connectivity, flow paths, fluid-fluid and fluid-rock interactions, and reservoir heterogeneity, among others. The upcoming of nanotechnology enables the development of novel nanoparticle-based tracers to overcome many of the challenges faced by conventional tracers. Among the advantages of nanoparticle-based tracers is the capability to functionalize their surface to yield stability and transportability through the subsurface. In addition, nanoparticles can be engineered to respond to a wide variety of stimuli, including light. The photoacoustic effect is the formation of sound waves following light absorption in a material sample. The medical community has successfully employed photoacoustic nanotracers as contrast agents for photoacoustic tomography imaging. We propose that properly engineered photoacoustic nanoparticles can be used as tracers in oil reservoirs. Our analysis begins by investigating the parameters controlling the conversion of light to acoustic waves, and strategies to optimize such parameters. Next, we analyze different kind of nanoparticles that we deem potential candidates for our subsurface operations. Then, we briefly discuss the excitation sources and make a comparison between continuous wave and pulsed sources. We finish by discussing the research gaps and challenges that must be addressed to incorporate these agents into our operations. At the time of this writing, no other study investigating the feasibility of using photoacoustic nanoparticles for tracer applications was found. Our work paves the way for a new class of passive tracers for oil reservoirs. Photoacoustic nanotracers are easy to detect and quantify and are therefore suitable for continuous in-line monitoring, contributing to the ongoing real-time data efforts in the oil and gas industry.


Sign in / Sign up

Export Citation Format

Share Document