Dynamics and Power Absorption of a Self-React Wave Energy Converter With Mechanical Power Takeoff System

2017 ◽  
Author(s):  
Changwei Liang ◽  
Xiaofan Li ◽  
Dillon Martin ◽  
Adam Wise ◽  
Robert Parker ◽  
...  
Keyword(s):  
Wave Energy ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
Ball Screw ◽  
Regular Waves ◽  
Energy Converter ◽  
Power Absorption ◽  
Optimal Power ◽  
Submerged Body ◽  
Equivalent Mass

A self-react wave energy converter which consists of a floating buoy and a submerged body is studied in this paper. The energy is extracted through the relative motion of the floating buoy and submerged body. Two kinds of power takeoff (PTO) system, which is the technique approaches to extract energy from the ocean, are considered for the proposed wave energy converter. One is a ball screw system with mechanical motion rectifier gearbox (which is called MMR system) and another one is solely a ball screw system (which is called non-MMR system as a comparison). The design of the proposed wave energy converter is presented and the model for both power takeoff systems are established based on their mechanisms. A time domain method is adopted to investigate the dynamics and power absorption for the proposed wave energy converter. The effect of equivalent mass on the optimal power and corresponding optimal power takeoff damping are studied both in regular and irregular waves. It is found that the equivalent mass plays different roles in the MMR system and non-MMR system. Due to the disengagement in MMR system, the equivalent mass helps to increase the power absorption at small wave 1periods, both in regular waves and irregular waves. The uncertainty of the drag coefficient on the power absorption of MMR system and non-MMR system is also investigated.

Latching Control of an OWC Spar-Buoy Wave Energy Converter in Regular Waves

2012 ◽  
Author(s):  
J. C. C. Henriques ◽  
A. F. O. Falcão ◽  
R. P. F. Gomes ◽  
L. M. C. Gato
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Phase Control ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
Wave Direction ◽  
Regular Waves ◽  
Energy Converter ◽  
Chamber Volume ◽  
The Time Domain

The present paper concerns an OWC spar-buoy, possibly the simplest concept for a floating oscillating-water-column (OWC) wave energy converter. It is an axisymmetric device (and so insensitive to wave direction) consisting basically of a (relatively long) submerged vertical tail tube open at both ends, fixed to a floater that moves essentially in heave. The length of the tube determines the resonance frequency of the inner water column. The oscillating motion of the internal free surface relative to the buoy, produced by the incident waves, makes the air flow through a turbine that drives an electrical generator. It is well known that the frequency response of point absorbers like the spar buoy is relatively narrow, which implies that their performance in irregular waves is relatively poor. Phase control has been proposed to improve this situation. The present paper presents a theoretical investigation of phase control by latching of an OWC spar-buoy in which the compressibility of air in the chamber plays an important role (the latching is performed by fast closing and opening an air valve in series with the turbine). In particular such compressibility may remove the constraint of latching threshold having to coincide with an instant of zero relative velocity between the two bodies (in the case under consideration, between the floater and the OWC). The modelling is performed in the time domain for a given device geometry, and includes the numerical optimization of the air turbine rotational speed, chamber volume and latching parameters. Results are obtained for regular waves.

scholarly journals Balancing Power Absorption and Fatigue Loads in Irregular Waves for an Oscillating Surge Wave Energy Converter

2016 ◽  
Author(s):  
Nathan M. Tom ◽  
Yi-Hsiang Yu ◽  
Alan D. Wright ◽  
Michael Lawson
Keyword(s):  
Wave Energy ◽  
Reactive Power ◽  
Load Ratio ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
The Novel ◽  
Energy Converter ◽  
Power Requirement ◽  
Power Absorption ◽  
Structural Loading

The aim of this paper is to describe how to control the power-to-load ratio of a novel wave energy converter (WEC) in irregular waves. The novel WEC that is being developed at the National Renewable Energy Laboratory combines an oscillating surge wave energy converter (OSWEC) with control surfaces as part of the structure; however, this work only considers one fixed geometric configuration. This work extends the optimal control problem so as to not solely maximize the time-averaged power, but to also consider the power-take-off (PTO) torque and foundation forces that arise because of WEC motion. The objective function of the controller will include competing terms that force the controller to balance power capture with structural loading. Separate penalty weights were placed on the surge-foundation force and PTO torque magnitude, which allows the controller to be tuned to emphasize either power absorption or load shedding. Results of this study found that, with proper selection of penalty weights, gains in time-averaged power would exceed the gains in structural loading while minimizing the reactive power requirement.

Latching Control of an Oscillating Water Column Spar-Buoy Wave Energy Converter in Regular Waves

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
J. C. C. Henriques ◽  
A. F. O. Falcão ◽  
R. P. F. Gomes ◽  
L. M. C. Gato
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Phase Control ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
Oscillating Water Column ◽  
Wave Direction ◽  
Regular Waves ◽  
Energy Converter ◽  
Chamber Volume

The present paper concerns an oscillating water column (OWC) spar-buoy, possibly the simplest concept for a floating OWC wave energy converter. It is an axisymmetric device (and so insensitive to wave direction) consisting basically of a (relatively long) submerged vertical tail tube open at both ends and fixed to a floater that moves essentially in heave. The length of the tube determines the resonance frequency of the inner water column. The oscillating motion of the internal free surface relative to the buoy, produced by the incident waves, makes the air flow through a turbine that drives an electrical generator. It is well known that the frequency response of point absorbers like the spar buoy is relatively narrow, which implies that their performance in irregular waves is relatively poor. Phase control has been proposed to improve this situation. The present paper presents a theoretical investigation of phase control through the latching of an OWC spar-buoy in which the compressibility of air in the chamber plays an important role (the latching is performed by fast closing and opening an air valve in series with the turbine). In particular, such compressibility may remove the constraint of the latching threshold having to coincide with an instant of zero relative velocity between the two bodies (in the case under consideration, between the floater and the OWC). The modeling is performed in the time domain for a given device geometry and includes the numerical optimization of the air turbine rotational speed, chamber volume, and latching parameters. Results are obtained for regular waves.

scholarly journals Numerical Evaluation of the Hydropneumatic Power of the Oscillating Water Column Wave Energy Converter Submitted to Regular and Irregular Waves

2021 ◽  
pp. 32-43
Author(s):  
Augusto Hack da Silva Koch ◽  
Maycon da Silveira Paiva ◽  
Caroline Barbosa Monteiro ◽  
Phelype Haron Oleinik ◽  
Liércio André Isoldi ◽  
...  
Keyword(s):  
Free Surface ◽  
Water Column ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
Oscillating Water Column ◽  
Regular Waves ◽  
Energy Converter ◽  
Sea State ◽  
Electric Generator

The purpose of this study is to computationally analyze the hydropneumatic power available in the air duct of an Oscillating Water Column (OWC) Wave Energy Converter (WEC) device when subject to realistic sea state data (irregular waves) and when submitted to the regular waves representative of this sea state. The OWC WEC is mainly composed of a hydropneumatic chamber and an air duct where a turbine and electric generator are coupled. The chamber is open below the free surface while the duct is open to the atmosphere. The oscillating movement of the water-free surface inside the chamber causes the air to flow, moving the turbine and generating electricity. To execute this study, a bi-dimensional computational model was considered and numerical simulations of wave generation were carried out using ANSYS Fluent, which is a Computational Fluid Dynamics (CFD) software based on the Finite Volume Method (FVM). The Volume of Fluid (VOF) multi-phase model was applied in the treatment of the water-air interaction. To evaluate the average hydropneumatic power available in the duct, the static pressure, velocity, and air mass flow rate were monitored. The results were analyzed, showing that the available power is 250% greater when the device is subject to realistic irregular waves rather than subject to representative regular waves.

scholarly journals Experimental Analysis of a Novel Adaptively Counter-Rotating Wave Energy Converter for Powering Drifters

2019 ◽  
Vol 7 (6) ◽  
pp. 171 ◽  
Author(s):  
Guoheng Wu ◽  
Zhongyue Lu ◽  
Zirong Luo ◽  
Jianzhong Shang ◽  
Chongfei Sun ◽  
...  
Keyword(s):  
Wave Energy ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
Surface Velocity ◽  
Small Scale ◽  
Power Constraint ◽  
Energy Converter ◽  
Wave Tank ◽  
Wide Range ◽  
Rotating Wave

Nowadays, drifters are used for a wide range of applications for researching and exploring the sea. However, the power constraint makes it difficult for their sampling intervals to be smaller, meaning that drifters cannot transmit more accurate measurement data to satellites. Furthermore, due to the power constraint, a modern Surface Velocity Program (SVP) drifter lives an average of 400 days before ceasing transmission. To overcome the power constraint of SVP drifters, this article proposes an adaptively counter-rotating wave energy converter (ACWEC) to supply power for drifters. The ACWEC has the advantages of convenient modular integration, simple conversion process, and minimal affection by the crucial sea environment. This article details the design concept and working principle, and the interaction between the wave energy converter (WEC) and wave is presented based on plane wave theory. To verify the feasibility of the WEC, the research team carried out a series of experiments in a wave tank with regular and irregular waves. Through experiments, it was found that the power and efficiency of the ACWEC are greatly influenced by parameters such as wave height and wave frequency. The maximum output power of the small scale WEC in a wave tank is 6.36 W, which allows drifters to detect ocean data more frequently and continuously.

Sign in / Sign up

Export Citation Format

Share Document