Singularity Variety of a 3SPS-1S Spherical Parallel Manipulator

2016 ◽  
Author(s):  
Ju Li ◽  
J. Michael McCarthy
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Algebraic Manifold ◽  
Quadric Surfaces ◽  
Constraint Manifold ◽  
Special Cases ◽  
Intersection Of Quadrics ◽  
Spherical Parallel Manipulator

In this paper, we study the manifold of configurations of a 3SPS-1S spherical parallel manipulator. This manifold is obtained as the intersection of quadrics in the hypersphere defined by quaternion coordinates and is called its constraint manifold. We then formulate Jacobian for this manipulator and consider its singular. This is a quartic algebraic manifold called the singularity variety of the parallel manipulator. A survey of the architectures that can be defined for the 3SPS-1S spherical parallel manipulators yield a number of special cases, in particular the architectures with coincident base or moving pivots yields singularity varieties that factor into two quadric surfaces.

Analysis of Two Spherical Parallel Manipulators With Hidden Revolute Joints

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Ju Li ◽  
J. Michael McCarthy
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Degree Of Freedom ◽  
Internal Constraints ◽  
Quadric Surfaces ◽  
Revolute Joints ◽  
Serial Chain ◽  
Point Of Intersection ◽  
Spherical Parallel Manipulator

In this paper, we examine two spherical parallel manipulators (SPMs) constructed with legs that include planar and spherical subchains that combine to impose constraints equivalent to hidden revolute joints. The first has supporting serial chain legs constructed from three revolute joints with parallel axes, denoted R∥R∥R, followed by two revolute joints that have intersecting axes, denoted RR̂. The leg has five degrees-of-freedom and is denoted R∥R∥R-RR̂. Three of these legs can be assembled so the spherical chains all share the same point of intersection to obtain a spherical parallel manipulator denoted as 3-R∥R∥R-RR̂. The second spherical parallel manipulator has legs constructed from three revolute joints that share one point of intersection, denoted RRR̂, and a second pair of revolute joints with axes that intersect in a different point. This five-degree-of-freedom leg is denoted RRR̂-RR̂. The spherical parallel manipulator constructed from these legs is 3-RRR̂-RR̂. We show that the internal constraints of these two types of legs combine to create hidden revolute joints that can be used to analyze the kinematics and singularities of these spherical parallel manipulators. A quaternion formulation provides equations for the quartic singularity varieties some of which decompose into pairs of quadric surfaces which we use to classify these spherical parallel manipulators.

Forward Displacement Analysis of Three New Classes of Analytic Spherical Parallel Manipulators

1998 ◽  
Author(s):  
Xian-Wen Kong
Keyword(s):  
Characteristic Polynomial ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Dual Solutions ◽  
Fourth Degree ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
The Third ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

Abstract The analytic manipulator is a manipulator the characteristic polynomial of which is of fourth degree or lower. Three new classes of analytic spherical parallel manipulators with prismatic actuators are proposed. The first is the spherical parallel manipulator with non-similar planar platforms, the second is the spherical parallel manipulator with similar planar platforms, and the third is the spherical parallel manipulator with orthogonal platforms. The forward displacement analysis of these new classes of spherical parallel manipulators is investigated in sequence. Polynomials of degree 4, 2 and 2 in one unknown respectively can be obtained to inscribe this problem. Due to dual solutions of other unknowns, a maximum of eight solutions might be possible for each of the new analytic spherical parallel manipulators.

Type Synthesis of 3-DOF Spherical Parallel Manipulators Based on Screw Theory1

2004 ◽  
Vol 126 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Screw Theory ◽  
General Procedure ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Type Synthesis ◽  
Validity Condition ◽  
First Time ◽  
Spherical Parallel Manipulator ◽  
Selection Of

A spherical parallel manipulator (SPM) refers to a 3-DOF (degree-of-freedom) parallel manipulator generating 3-DOF spherical motion. A method is proposed for the type synthesis of SPMs based on screw theory. The wrench systems of a spherical parallel kinematic chain (SPKC) and its legs are first analyzed. A general procedure is then proposed for the type synthesis of SPMs. The type synthesis of legs for SPKCs, the type synthesis of SPKCs, as well as the selection of inputs of SPMs are dealt with in sequence. An input validity condition of SPMs is proposed. SPKCs with and without inactive joints are synthesized. The number of overconstraints of each SPKC is also given. The phenomenon of dependent joint groups in an SPKC is revealed for the first time.

Forward Displacement Analysis of a Linearly Actuated Quadratic Spherical Parallel Manipulator

2010 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment Gosselin ◽  
James M. Ritchie
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Alternative Formulation ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Actuated Joints ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

A quadratic parallel manipulator refers to a parallel manipulator with a quadratic characteristic polynomial. This paper revisits the forward displacement analysis (FDA) of a linearly actuated quadratic spherical parallel manipulator. An alternative formulation of the kinematic equations of the quadratic spherical parallel manipulator is proposed. The singularity analysis of the quadratic spherical parallel manipulator is then dealt with. A new type of singularity of parallel manipulators — leg actuation singularity — is identified. If a leg is in a leg actuation singular configuration, the actuated joints in this leg cannot be actuated even if the actuated joints in other legs are released. A formula is revealed that produces a unique current solution to the FDA for a given set of inputs. The input space is also revealed for the quadratic spherical parallel manipulator in order to guarantee that the robot works in the same assembly mode. This work may facilitate the control of the quadratic spherical parallel manipulator.

A new family of spherical parallel manipulators

Robotica ◽  
2002 ◽  
Vol 20 (4) ◽  
pp. 353-358 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
End Effector ◽  
Singular Configurations ◽  
New Family ◽  
Geometric Conditions ◽  
Singularity Locus ◽  
The Given ◽  
Spherical Parallel Manipulator ◽  
Spherical Motion

In the literature, 3-RRPRR architectures were proposed to obtain pure translation manipulators. Moreover, the geometric conditions, which 3-RRPRR architectures must match, in order to make the end-effector (platform) perform infinitesimal (elementary) spherical motion were enunciated. The ability to perform elementary spherical motion is a necessary but not sufficient condition to conclude that the platform is bound to accomplish finite spherical motion, i.e. that the mechanism is a spherical parallel manipulator (parallel wrist). This paper demonstrates that the 3-RRPRR architectures matching the geometric conditions for elementary spherical motion make the platform accomplish finite spherical motion, i.e. they are parallel wrists (3-RRPRR wrist), provided that some singular configurations, named translation singularities, are not reached. Moreover, it shows that 3-RRPRR wrists belong to a family of parallel wrists which share the same analytic expression of the constraints which the legs impose on the platform. Finally, the condition that identifies all the translation singularities of the mechanisms of this family is found and geometrically interpreted. The result of this analysis is that the translation singularity locus can be represented by a surface (singularity surface) in the configuration space of the mechanism. Singularity surfaces drawn by exploiting the given condition are useful tools in designing these wrists.

Forward Displacement Analysis and Singularity Analysis of a Special 2-DOF 5R Spherical Parallel Manipulator

2011 ◽  
Vol 3 (2) ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Type I ◽  
Forward Displacement ◽  
Displacement Analysis ◽  
Singular Configuration ◽  
Self Motion ◽  
Spherical Parallel Manipulator ◽  
Forward Displacement Analysis

This paper deals with the forward displacement analysis and singularity analysis of a special 2-DOF 5R spherical parallel manipulator, in which the angle between the axes of any two adjacent revolute joints is a right angle. An alternative formulation of the kinematic equations of the 5R spherical parallel manipulator is proposed. A formula is then derived to produce directly the unique current solution to the forward displacement analysis of the 5R spherical parallel manipulator. It will also be addressed to keep the spherical parallel manipulator in the same working mode and assembly mode by simply restraining the range of an input angle. Unlike other parallel manipulators, the 5R spherical parallel manipulator always undergoes self-motion in a type-II singular configuration, and the 3R leg of the 5R spherical parallel manipulator also always undergoes self-motion in a type-I singular configuration.

A planar quaternion approach to the kinematic synthesis of a parallel manipulator

Robotica ◽  
1997 ◽  
Vol 15 (4) ◽  
pp. 361-365 ◽  
Author(s):  
Andrew P. Murray ◽  
François Pierrot ◽  
Pierre Dauchez ◽  
J. Michael McCarthy
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Kinematic Synthesis ◽  
End Effector ◽  
Constraint Manifold ◽  
Planar Parallel Manipulators

In this paper we present a technique for designing planar parallel manipulators with platforms capable of reaching any number of desired poses. The manipulator consists of a platform connected to ground by RPR chains. The set of positions and orientations available to the end-effector of a general RPR chain is mapped into the space of planar quaternions to obtain a quadratic manifold. The coefficients of this constraint manifold are functions of the locations of the base and platform R joints and the distance between them. Evaluating the constraint manifold at each desired pose and defining the limits on the extension of the P joint yields a set of equations. Solutions of these equations determine chains that contain the desired poses as part of their workspaces. Parallel manipulators that can reach the prescribed workspace are assembled from these chains. An example shows the determination of three RPR chains that form a manipulator able to reach a prescribed workspace.

scholarly journals Comments on “Design and analysis of a totally decoupled 3-DOF spherical parallel manipulator” by D. Zhang and F. Zhang (Robotica, Available on CJO 19 Nov, 2010, doi:10.1017/S0263574710000652)

Robotica ◽  
2011 ◽  
Vol 29 (7) ◽  
pp. 1101-1103
Author(s):  
Xianwen Kong ◽  
Clément Gosselin ◽  
Marco Carricato
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
General Area ◽  
Parallel Mechanisms ◽  
Abstract Section ◽  
Spherical Parallel Manipulator

D. Zhang and F. Zhang addressed the issue of designing and analyzing totally decoupled 3-DOF spherical parallel manipulators (SPMs) and concluded that the SPMs in Figs. 5(a) and 5(b) of ref. [1] are completely decoupled and fully isotropic (see Abstract, Section 5, and Conclusions in ref. [1]). This topic is of great interest to researchers working in the general area of parallel mechanisms. However, we disagree with the authors of ref. [1] on their conclusion.

Evaluation of the Position Error of Four Non-Overconstrained Spherical Parallel Manipulators

2012 ◽  
Vol 162 ◽  
pp. 194-203
Author(s):  
A. Chaker ◽  
A. Mlika ◽  
M.A. Laribi ◽  
L. Romdhane ◽  
S. Zeghloul
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Position Error ◽  
Point Of View ◽  
Good Precision ◽  
End Effector ◽  
High Rigidity ◽  
Manufacturing Errors ◽  
Position And Orientation ◽  
Spherical Parallel Manipulator

The 3-RRR spherical parallel manipulator is known to be highly overconstrained, which causes several problems of mounting the mechanism, but has the advantage of having high rigidity thus a good precision. Several works in the literature proposed non-overconstrained versions of this mechanism. However, very few works dealt with the problem of the consequence of modifying an overconstrained mechanism into a non-overconstrained one, mainly from an accuracy point of view. In this work, we present an analysis of the accuracy of four different non-overconstrained SPMs, i.e., 3-RSR, 3-RCC, 3-RRS, and 3-RUU. These four SPM are then evaluated in translational and rotational accuracy due to manufacturing errors. The error on the position and orientation of the end-effector, due to manufacturing errors, are computed in 100 different configurations within their workspace. These SPMs are then compared among each other and we showed that the 3-RRS has the best compromise between the translational and rotational accuracy.

On the Direct Kinematics of Spherical Three-Degree-of-Freedom Parallel Manipulators with a Coplanar Platform

1994 ◽  
Vol 116 (2) ◽  
pp. 587-593 ◽  
Author(s):  
C. M. Gosselin ◽  
J. Sefrioui ◽  
M. J. Richard
Keyword(s):  
Parallel Manipulator ◽  
Minimal Polynomial ◽  
Polynomial Solution ◽  
Parallel Manipulators ◽  
Degree Of Freedom ◽  
Real Solutions ◽  
Revolute Joints ◽  
Three Degree Of Freedom ◽  
Spherical Parallel Manipulator ◽  
Direct Kinematics

This paper presents a polynomial solution to the direct kinematic problem of a class of spherical three-degree-of-freedom parallel manipulators. This class is defined as the set of manipulators for which the axes of the three revolute joints attached to the gripper link are coplanar and symmetrically arranged. It is shown that, for these manipulators, the direct kinematic problem admits a maximum of 8 real solutions. A polynomial of degree 8 is obtained here to support this result and cases for which all the roots of the polynomial lead to real configurations are presented. Finally, the spherical parallel manipulator with collinear actuators, which received some attention in the literature, is also treated and is shown to lead to a minimal polynomial of the same degree. Examples of the application of the method to manipulators of each category are given and solved.

Sign in / Sign up

Export Citation Format

Share Document