Design and Simulation of a Stability Control System for 4 Independent Wheel Drive Electric Vehicle

2016 ◽  
Author(s):  
Juan S. Núñez ◽  
Luis E. Muñoz
Keyword(s):  
Control System ◽  
Electric Vehicle ◽  
Sliding Mode ◽  
Stability Control ◽  
Performance Comparison ◽  
Phase Portraits ◽  
Vehicle Model ◽  
Stability Control System ◽  
The Stability ◽  
Yaw Moment

With the aim of prevent situations of vehicle instability against different driving maneuvers, the vehicle yaw stability becomes crucial for safe operation. This paper presents the design and simulation of a traction and a stability control system algorithms for independent four-wheel-driven electric vehicle. The stability control system consists of a multilevel algorithm divided into a high level controller and a low level controller. First, an analysis of the stability of the vehicle is performed using phase portraits analysis, both in open loop and closed loop. The stability control system is designed to generate a desired yaw moment according to the steady state cornering relationship with the steering angle input. As the test vehicle, a 14 DoF vehicle model is proposed including nonlinear tire models that allow the generation of combined forces. The vehicle model includes the powertrain dynamics. The yaw moment generation is performed using the traction and braking forces between the tires of each side of both front and rear axle. In order to generate the maximum traction forces in each of the wheels, a traction and a braking control is developed via a sliding mode controller scheme. Finally a performance comparison between a controlled and an uncontrolled vehicle is presented. The behavior of both vehicles is simulated using a classical double lane change driving maneuver.

scholarly journals Vehicle Stability Control Strategy Based on Recognition of Driver Turning Intention for Dual-Motor Drive Electric Vehicle

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Shu Wang ◽  
Xuan Zhao ◽  
Qiang Yu
Keyword(s):  
Control System ◽  
Electric Vehicle ◽  
Control Strategy ◽  
Stability Control ◽  
Motor Drive ◽  
Vehicle Stability ◽  
Lane Change ◽  
Vehicle Stability Control ◽  
Stability Control System ◽  
The Stability

Vehicle stability control should accurately interpret the driving intention and ensure that the actual state of the vehicle is as consistent as possible with the desired state. This paper proposes a vehicle stability control strategy, which is based on recognition of the driver’s turning intention, for a dual-motor drive electric vehicle. A hybrid model consisting of Gaussian mixture hidden Markov (GHMM) and Generalized Growing and Pruning RBF (GGAP-RBF) neural network is constructed to recognize the driver turning intention in real time. The turning urgency coefficient, which is computed on the basis of the recognition results, is used to establish a modified reference model for vehicle stability control. Then, the upper controller of the vehicle stability control system is constructed using the linear model predictive control theory. The minimum of the quadratic sum of the working load rate of the vehicle tire is taken as the optimization objective. The tire-road adhesion condition, performance of the motor and braking system, and state of the motor are taken as constraints. In addition, a lower controller is established for the vehicle stability control system, with the task of optimizing the allocation of additional yaw moment. Finally, vehicle tests were carried out by conducting double-lane change and single-lane change experiments on a platform for dual-motor drive electric vehicles by using the virtual controller of the A&D5435 hardware. The results show that the stability control system functions appropriately using this control strategy and effectively improves the stability of the vehicle.

Vehicle Direct Yaw Moment Control with Longitudinal Forces Distribution

2014 ◽  
Vol 709 ◽  
pp. 331-334
Author(s):  
Man Hong Huang ◽  
Huan Shen ◽  
Yun Sheng Tan
Keyword(s):  
Control System ◽  
Reference Model ◽  
Sliding Mode ◽  
Stability Control ◽  
Yaw Rate ◽  
Vehicle Stability Control ◽  
Braking Torque ◽  
Stability Control System ◽  
Yaw Moment Control ◽  
Yaw Moment

In this paper, a vehicle stability control system is proposed to improve vehicle comfort, handling and stability. The control system includes reference model, DYC controller and Distributer. Reference model is used to obtain the desired yaw rate. DYC controller determines the desired yaw moment by means of sliding-mode technique. Distributer, based on maneuverability and comfort, distributes driving torque or braking torque according to the desired yaw rate. Simulation result shows that the proposed control algorithm can improve vehicle handling and stability effectively.

Stability Optimal Control Based on 15-Dof Vehicle Model

2011 ◽  
Vol 299-300 ◽  
pp. 1266-1270 ◽  
Author(s):  
Xiao Bin Fan ◽  
Yu Jiang ◽  
Hui Gang Wang
Keyword(s):  
Control System ◽  
Estimation Algorithm ◽  
Stability Control ◽  
Slip Angle ◽  
Vehicle Model ◽  
Simulation Test ◽  
Side Slip Angle ◽  
Handling Characteristics ◽  
Stability Control System ◽  
The Stability

The 15 degrees of nonlinear dynamic vehicle model is established, and then Dugoff and magic formula tire model are studied by comparison. Then the braking system dynamics model and the side-slip angle estimation algorithm are discussed. Stability control system is established based on the control target of combined yaw and side-slip angle with linear 2-dof vehicle handling characteristics model. It shows that control system can perfectly control vehicle driving and can improve the stability of car active safety through the serpent’s simulation test.

Design and Implementation of Large-Scale Temperature Stability Control System

2014 ◽  
Vol 644-650 ◽  
pp. 313-316
Author(s):  
Wen Lai Liu
Keyword(s):  
Control System ◽  
System Design ◽  
Large Scale ◽  
Control Method ◽  
Temperature Stability ◽  
Stability Control ◽  
Control System Design ◽  
Scale Temperature ◽  
Stability Control System ◽  
The Stability

large-scale temperature stability control method is studied in this paper. In the process of large-scale temperature control, the stability of control is a very important indicator. To this end, this paper proposes a large-scale temperature stability control algorithm based on hierarchical control method. Balance equation of large-scale temperature stability control is created for the effective transmission of control data. According to the constant control theory, large-scale temperature stability control system design is achieved. Experimental results show that the proposed algorithm for large-scale temperature stability control system design, can greatly improve the stability of control, and get the satisfactory results.

A Review on Integrated Active Steering and Braking Control for Vehicle Yaw Stability System

2014 ◽  
Vol 71 (2) ◽  
Author(s):  
M.K. Aripin ◽  
Y. M. Sam ◽  
A. D. Kumeresan ◽  
M.F. Ismail ◽  
Peng Kemao
Keyword(s):  
Control System ◽  
Tracking Control ◽  
Sliding Mode ◽  
Stability Control ◽  
Yaw Rate ◽  
Active Steering ◽  
Yaw Stability ◽  
Stability Control System ◽  
Review Study ◽  
Braking Control

A review study on integrated active steering and braking control for vehicle yaw stability system is conducted and its finding is discussed in this paper. For road-vehicle dynamic, lateral dynamic control is important in order to determine the vehicle stability. The aw stability control system is the prominent approach for vehicle lateral dynamics where the actual yaw rate and sideslip should be tracked by the controller close to the desired response. To improve the performance of yaw stability control during steady state and critical driving conditions, a current approach using active control of integrated steering and braking could be implemented. This review study discusses the vehicle models, control objectives, control problems and propose control strategies for vehicle yaw stability control system. In the view of control system engineering, the transient performances of tracking control are essential. Based on the review, this paper discusses a basic concept of control strategy based on the composite nonlinear feedback (CNF) and sliding mode control (SMC) whichcan be proposed for integrated active steering and braking control in order to improve the transient performances of the yaw rate and sideslip tracking control in the presence of uncertainties and disturbances.

Sign in / Sign up

Export Citation Format

Share Document