scholarly journals Surface Error and Stability Chart of Beam-Type Workpiece in Milling Processes

2016 ◽  
Author(s):  
Adam K. Kiss ◽  
Daniel Bachrathy ◽  
Gabor Stepan
Keyword(s):  
Forced Vibration ◽  
Tool Path ◽  
High Surface ◽  
Element Analysis ◽  
Surface Location Error ◽  
Excited Vibration ◽  
Stability Chart ◽  
Beam Type ◽  
Regeneration Effect ◽  
The Stability

In milling processes, the intermittent cutting force may lead to harmful vibrations. These vibrations are classified into two groups. One of them is the self excited vibration which comes from the loss of stability due to the regeneration effect and these vibrations lead to unacceptable chatter marks. The other one is the forced vibration which can lead to high Surface Location Error (SLE) in case of resonant spindle speeds. In this paper, the dynamics of the beam-type workpiece is considered which is modelled by means of Finite Element Analysis (FEA). Both the forced vibration and the stability properties are predicted along the tool path. The surface properties are computed on the stable regions of the stability chart which presents the chatter-free (stable) parameter domain as a function of the spindle speed and the tool path. The theoretical results are compared to the measured SLE and surface roughness.

scholarly journals Polyhydroxyalkanoate Nanoparticles for Pulmonary Drug Delivery: Interaction with Lung Surfactant

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1482
Author(s):  
Olga Cañadas ◽  
Andrea García-García ◽  
M. Auxiliadora Prieto ◽  
Jesús Pérez-Gil
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Bacterial Species ◽  
High Surface ◽  
Lung Surfactant ◽  
Delivery Systems ◽  
Pulmonary Drug Delivery ◽  
Epifluorescence Microscopy ◽  
Energy Storage Materials ◽  
The Stability

Polyhydroxyalkanoates (PHA) are polyesters produced intracellularly by many bacterial species as energy storage materials, which are used in biomedical applications, including drug delivery systems, due to their biocompatibility and biodegradability. In this study, we evaluated the potential application of this nanomaterial as a basis of inhaled drug delivery systems. To that end, we assessed the possible interaction between PHA nanoparticles (NPs) and pulmonary surfactant using dynamic light scattering, Langmuir balances, and epifluorescence microscopy. Our results demonstrate that NPs deposited onto preformed monolayers of DPPC or DPPC/POPG bind these surfactant lipids. This interaction facilitated the translocation of the nanomaterial towards the aqueous subphase, with the subsequent loss of lipid from the interface. NPs that remained at the interface associated with liquid expanded (LE)/tilted condensed (TC) phase boundaries, decreasing the size of condensed domains and promoting the intermixing of TC and LE phases at submicroscopic scale. This provided the stability necessary for attaining high surface pressures upon compression, countering the destabilization induced by lipid loss. These effects were observed only for high NP loads, suggesting a limit for the use of these NPs in pulmonary drug delivery.

scholarly journals Inlay-Retained Dental Bridges—A Finite Element Analysis

2021 ◽  
Vol 11 (9) ◽  
pp. 3770
Author(s):  
Monica Tatarciuc ◽  
George Alexandru Maftei ◽  
Anca Vitalariu ◽  
Ionut Luchian ◽  
Ioana Martu ◽  
...  
Keyword(s):  
Finite Element ◽  
Young Patients ◽  
Maximum Pressure ◽  
Class Iii ◽  
Element Analysis ◽  
Dental Prostheses ◽  
Abutment Teeth ◽  
Fixed Dental Prostheses ◽  
Implant Therapy ◽  
The Stability

Inlay-retained dental bridges can be a viable minimally invasive alternative when patients reject the idea of implant therapy or conventional retained full-coverage fixed dental prostheses, which require more tooth preparation. Inlay-retained dental bridges are indicated in patients with good oral hygiene, low susceptibility to caries, and a minimum coronal tooth height of 5 mm. The present study aims to evaluate, through the finite element method (FEM), the stability of these types of dental bridges and the stresses on the supporting teeth, under the action of masticatory forces. The analysis revealed the distribution of the load on the bridge elements and on the retainers, highlighting the areas of maximum pressure. The results of our study demonstrate that the stress determined by the loading force cannot cause damage to the prosthetic device or to abutment teeth. Thus, it can be considered an optimal economical solution for treating class III Kennedy edentation in young patients or as a provisional pre-implant rehabilitation option. However, special attention must be paid to its design, especially in the connection area between the bridge elements, because the connectors and the retainers represent the weakest parts.

Stability of a Rigid Body With an Oscillating Particle: An Application of MACSYMA

1985 ◽  
Vol 52 (3) ◽  
pp. 686-692 ◽  
Author(s):  
L. A. Month ◽  
R. H. Rand
Keyword(s):  
Angular Velocity ◽  
Rigid Body ◽  
Classical Problem ◽  
Moment Of Inertia ◽  
Model Parameters ◽  
Stability Chart ◽  
The Stability ◽  
Transition Curves ◽  
Minimum Moment ◽  
Small Angular Velocity

This problem is a generalization of the classical problem of the stability of a spinning rigid body. We obtain the stability chart by using: (i) the computer algebra system MACSYMA in conjunction with a perturbation method, and (ii) numerical integration based on Floquet theory. We show that the form of the stability chart is different for each of the three cases in which the spin axis is the minimum, maximum, or middle principal moment of inertia axis. In particular, a rotation with arbitrarily small angular velocity about the maximum moment of inertia axis can be made unstable by appropriately choosing the model parameters. In contrast, a rotation about the minimum moment of inertia axis is always stable for a sufficiently small angular velocity. The MACSYMA program, which we used to obtain the transition curves, is included in the Appendix.

Comparative study of finite element analysis of steel silos with rectangular and I stiffeners

2021 ◽  
Vol 10 (1) ◽  
pp. 9
Author(s):  
Prasad Lakshmi ◽  
Neethu Elsa Anil
Keyword(s):  
Reinforced Concrete ◽  
Element Analysis ◽  
Plate Structures ◽  
Steel Reinforced Concrete ◽  
Wide Range ◽  
Earthquake Load ◽  
The Stability ◽  
Dynamic Loading Conditions ◽  
Steel Silos ◽  
Static And Dynamic Loading

Silos are used by a wide range of industries to store bulk solids in quantities ranging from a few tones to hundreds or thousands of tones. They can be constructed of steel or reinforced concrete. Steel bins range from heavily stiffened flat plate structures to efficient unstiffened shell structures. They can be closed or open. They are subjected to many different static and dynamic loading conditions, mainly due to the unique characteristics of stored materials. Wind and earthquake load often undermine the stability of the silos. A steel silo with and without stiffeners is adopted and static structural analysis and dynamic analysis is done. The analysis is done by idealizing geometry, material and boundary conditions. Keywords: steel, reinforced concrete, silos.

Understanding Micro-Droplet Interface Bilayers for Developing Bioinspired Sensors

2013 ◽  
Author(s):  
Guru Venkatesan ◽  
Andy Sarles
Keyword(s):  
Water Droplet ◽  
Morphological Changes ◽  
High Surface ◽  
High Surface Area ◽  
Material System ◽  
Modes Of Operation ◽  
New Class ◽  
Wide Range ◽  
Droplet Sizes ◽  
The Stability

Droplet-based biomolecular arrays form the basis for a new class of bioinspired material system, whereby decreasing the sizes of the droplets and increasing the number of droplets can lead to higher functional density for the array. In this paper, we report on a non-microfluidic approach to form and connect nanoliter-to-femtoliter, lipid-coated aqueous droplets in oil to form micro-droplet interface bilayers (μDIBs). Two different modes of operation are reported for dispensing a wide range of droplet sizes (2–200μm radius). Due to the high surface-area-to-volume ratios of microdroplets at these length scales, droplet shrinking is prominent, which affects the stability and lifetime of the bilayer. To better quantify these effects, we measure the shrinkage rates for 8 different water droplet/oil compositions and study the effect of lipid placement and lipid type on morphological changes to μDIBs.

Finite Element Analysis of Incremental Sheet Forming for Metal Sheet

2018 ◽  
Vol 783 ◽  
pp. 148-153
Author(s):  
Muhammad Sajjad ◽  
Jithin Ambarayil Joy ◽  
Dong Won Jung
Keyword(s):  
Mechanical Properties ◽  
Sheet Metal ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Machining Process ◽  
Machining Parameters ◽  
Forming Process ◽  
Element Analysis ◽  
Tool Diameter

Incremental sheet metal forming, is a non-conventional machining process which offers higher formability, flexibility and low cost of production than the traditional conventional forming process. Punch or tool used in this forming process consecutively forces the sheet to deform locally and ultimately gives the target profile. Various machining parameters, such as type of tool, tool path, tool size, feed rate and mechanical properties of sheet metal, like strength co-efficient, strain hardening index and ultimate tensile strength, effects the forming process and the formability of final product. In this research paper, Single Point Incremental Forming was simulated using Dassault system’s Abaqus 6.12-1 and results are obtained. Results of sheet profile and there change in thickness is investigated. For this paper, we simulated the process in abaqus. The tool diameter and rotational speed is find out for the production of parts through incremental forming. The simulation is done for two type of material with different mechanical properties. Various research papers were used to understand the process of incremental forming and its simulation.

Study on Self-Excited Vibration Mechanism of Wheel-Rail Lateral Contact System

2013 ◽  
Vol 427-429 ◽  
pp. 257-261
Author(s):  
Li Xia Sun ◽  
Jian Wei Yao ◽  
Fu Guo Hou ◽  
Xin Zhao
Keyword(s):  
Feedback Mechanism ◽  
Point Of View ◽  
Contact System ◽  
Vibration System ◽  
Lateral Contact ◽  
System A ◽  
Vibration Model ◽  
Excited Vibration ◽  
Vibration Mechanism ◽  
The Stability

In order to investigate self-excited vibration mechanism of wheel-rail lateral contact system, a two DOF elasticity position wheelset lateral vibration model is established which considers the dry friction; the mechanism of the wheelset lateral self-excited vibration is investigated from the energy point of view. It shows that: the bifurcation diagram of this wheel-rail lateral contact system has a supercritical Hopf bifurcation. The energy of self-excited vibration derives from a part of traction energy; the creep rate in the wheel-rail system act as a feedback mechanism in the wheelset lateral self-excited vibration system. The stability of the wheelset self-excited vibration system depends mainly on the total energy removed from and imported into the system.

Finite Element Analysis of Metal Flow of Finishing Groove in Hot Continuous Rolling Bar

2012 ◽  
Vol 510 ◽  
pp. 667-672
Author(s):  
Jia Lin Zhou ◽  
Chen Gang Pan ◽  
Xiao Yong Zhang
Keyword(s):  
Strain Distribution ◽  
Metal Flow ◽  
Dimensional Accuracy ◽  
Stress And Strain ◽  
Fe Model ◽  
Element Analysis ◽  
Iron And Steel ◽  
Expansion Angle ◽  
The Stability ◽  
Stress And Strain Distribution

This article established 3D FE model of dual-radius arc finishing groove and tangent expansion angle finishing groove using ANSYS / LS-DYNA software for Wuhan Iron and Steel plant Ф16 hot continuous bar, and analyzed metal flow pattern, stress and strain distribution of two types finishing grooves. The results show that surface stress and strain distribution of dual-radius arc finishing groove have better uniform than them of tangent expansion angle finishing groove, and dual-radius arc finishing groove ensures the stability of the rolled piece in finishing groove, improve the dimensional accuracy and surface quality of rolled finishing product.

Sign in / Sign up

Export Citation Format

Share Document