Design of a Force Sensor Based on Flexure Beams With Piezoresistive and PVDF Elements

2016 ◽  
Author(s):  
Yuzhang Wei ◽  
Qingsong Xu
Keyword(s):  
Polyvinylidene Fluoride ◽  
Output Voltage ◽  
Experimental Studies ◽  
Force Sensor ◽  
Sufficient Accuracy ◽  
Force Sensing ◽  
Biological Cell ◽  
Concept Design ◽  
Cell Injection ◽  
Sensing Applications

Majority of existing methods of measuring micro-force are limited by the sensing elements, which are fixed on the manipulator and not well decoupled from other axes. In this paper, a unique 1-D force sensor with different sensing elements is first proposed as a micro-manipulator for 1-D force sensing applications in biological cell injection. The goal is to fabricate a compliant sensor using piezoresistive and PVDF (polyvinylidene fluoride) elements for cell injection with sufficient accuracy. The designed sensor is manufactured and calibrated with a commercial GSO gram sensor. Experimental results show a good linearity between the applied force and output voltage signals, which demonstrates the feasibility of the concept design of a force sensor acting as the cell holder. The performances of the force sensor employing piezoresistive and PVDF elements are compared by conducting experimental studies.

scholarly journals Static Force Measurement Using Piezoelectric Sensors

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Kyungrim Kim ◽  
Jinwook Kim ◽  
Xiaoning Jiang ◽  
Taeyang Kim
Keyword(s):  
Surface Charge ◽  
Piezoelectric Effect ◽  
Force Measurement ◽  
Piezoelectric Materials ◽  
Force Sensor ◽  
Piezoelectric Sensors ◽  
Force Sensing ◽  
Static Force ◽  
Sensing Applications ◽  
Direct Piezoelectric Effect

In force measurement applications, a piezoelectric force sensor is one of the most popular sensors due to its advantages of low cost, linear response, and high sensitivity. Piezoelectric sensors effectively convert dynamic forces to electrical signals by the direct piezoelectric effect, but their use has been limited in measuring static forces due to the easily neutralized surface charge. To overcome this shortcoming, several static (either pure static or quasistatic) force sensing techniques using piezoelectric materials have been developed utilizing several unique parameters rather than just the surface charge produced by an applied force. The parameters for static force measurement include the resonance frequency, electrical impedance, decay time constant, and capacitance. In this review, we discuss the detailed mechanism of these piezoelectric-type, static force sensing methods that use more than the direct piezoelectric effect. We also highlight the challenges and potentials of each method for static force sensing applications.

scholarly journals Recent Advances in ZnO-Based Carbon Monoxide Sensors: Role of Doping

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4425
Author(s):  
Ana María Pineda-Reyes ◽  
María R. Herrera-Rivera ◽  
Hugo Rojas-Chávez ◽  
Heriberto Cruz-Martínez ◽  
Dora I. Medina
Keyword(s):  
Carbon Monoxide ◽  
High Performance ◽  
Gas Sensing ◽  
Experimental Studies ◽  
Electrical Performance ◽  
Long Term Stability ◽  
Sensing Applications ◽  
Recent Advances ◽  
Sensitivity And Selectivity ◽  
Doped Zno

Monitoring and detecting carbon monoxide (CO) are critical because this gas is toxic and harmful to the ecosystem. In this respect, designing high-performance gas sensors for CO detection is necessary. Zinc oxide-based materials are promising for use as CO sensors, owing to their good sensing response, electrical performance, cost-effectiveness, long-term stability, low power consumption, ease of manufacturing, chemical stability, and non-toxicity. Nevertheless, further progress in gas sensing requires improving the selectivity and sensitivity, and lowering the operating temperature. Recently, different strategies have been implemented to improve the sensitivity and selectivity of ZnO to CO, highlighting the doping of ZnO. Many studies concluded that doped ZnO demonstrates better sensing properties than those of undoped ZnO in detecting CO. Therefore, in this review, we analyze and discuss, in detail, the recent advances in doped ZnO for CO sensing applications. First, experimental studies on ZnO doped with transition metals, boron group elements, and alkaline earth metals as CO sensors are comprehensively reviewed. We then focused on analyzing theoretical and combined experimental–theoretical studies. Finally, we present the conclusions and some perspectives for future investigations in the context of advancements in CO sensing using doped ZnO, which include room-temperature gas sensing.

Liquid encapsulated electrostatic energy harvester for low-frequency vibrations

2012 ◽  
Vol 24 (1) ◽  
pp. 61-69 ◽  
Author(s):  
Ling Bu ◽  
Xiaoming Wu ◽  
Xiaohong Wang ◽  
Litian Liu
Keyword(s):  
Polyvinylidene Fluoride ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Electrostatic Energy ◽  
Maximum Output ◽  
Flowing Liquid ◽  
Horizontal Vibration ◽  
Low Viscosity ◽  
High Relative Permittivity

This article presents the modeling, fabrication, and testing of liquid encapsulated energy harvester using polyvinylidene fluoride electrets. Unlike harvesters reported in previous literature, this liquid encapsulated energy harvester uses flowing liquid rather than conventional resonating structures to induce variable capacitance and is more suitable for low-frequency applications. Prototypes injected with three types of liquid ( N-methyl-2-pyrrolidone, N, N-dimethylformamide, and glycerin) are tested in horizontal vibration and rotary motion mode, respectively. The results show that N, N-dimethylformamide–injected prototypes display the most desirable performance in horizontal vibration testing at 1–10 Hz due to high relative permittivity and low viscosity, with maximum output voltage of 2.32 V and power of 0.18 µW at 10 Hz. Glycerin-injected prototypes perform best at 0.1–1 Hz rotation due to effective movement and highest permittivity, with maximum output voltage of 11.46 V and power of 2.19 µW at 1 Hz.

Research on PVDF Micro-Force Sensor

2014 ◽  
Vol 599-601 ◽  
pp. 1135-1138
Author(s):  
Chao Zhe Ma ◽  
Jin Song Du ◽  
Yi Yang Liu
Keyword(s):  
Power Dissipation ◽  
Polyvinylidene Fluoride ◽  
High Sensitivity ◽  
Force Sensor ◽  
Calibration Method ◽  
Pvdf Film ◽  
Force Sensors ◽  
Low Power Dissipation ◽  
Micro Force Sensor ◽  
Processing Circuit

At present, sub-micro-Newton (sub-μN) micro-force in micro-assembly and micro-manipulation is not able to be measured reliably. The piezoelectric micro-force sensors offer a lot of advantages for MEMS applications such as low power dissipation, high sensitivity, and easily integrated with piezoelectric micro-actuators. In spite of many advantages above, the research efforts are relatively limited compared to piezoresistive micro-force sensors. In this paper, Sensitive component is polyvinylidene fluoride (PVDF) and the research object is micro-force sensor based on PVDF film. Moreover, the model of micro-force and sensor’s output voltage is built up, signal processing circuit is designed, and a novel calibration method of micro-force sensor is designed to reliably measure force in the range of sub-μN. The experimental results show the PVDF sensor is designed in this paper with sub-μN resolution.

Design and Analysis of Force Sensor for Condition Monitoring System of Ball Cold Heading Forming

2013 ◽  
Vol 364 ◽  
pp. 253-256 ◽  
Author(s):  
Qi Zhang ◽  
Ying Jun Li ◽  
Ru Jian Ma ◽  
Xiu Hua Men
Keyword(s):  
Condition Monitoring ◽  
Dynamic Performance ◽  
Force Sensor ◽  
Dynamic Measurement ◽  
Wide Frequency Range ◽  
Force Sensing ◽  
Frequency Range ◽  
Advantages And Disadvantages ◽  
Condition Monitoring System ◽  
Forming Defects

In order to solve the forming defects in the steel ball cold heading process, a novel force sensor which chooses the PVDF piezoelectric films as force-sensing elements is designed. The advantages and disadvantages of piezoelectric force sensor on measurement of the cold heading force are compared with existing force sensors. By using FEM, sensor’s linearity and the structure size are analyzed. Compared with the traditional sensor, this structure is more reasonable. The presented PVDF piezoelectric force sensor has wide frequency range, good dynamic performance, and can realize dynamic measurement.

scholarly journals Design, fabrication and experimental studies of compliant flexure diaphragm for micro pump

2018 ◽  
Vol 7 (2.21) ◽  
pp. 66 ◽  
Author(s):  
R Roopa ◽  
P Navin Karanth ◽  
S M. Kulkarni
Keyword(s):  
Polyvinylidene Fluoride ◽  
High Performance ◽  
Experimental Studies ◽  
Single Layer ◽  
Operating Voltage ◽  
Driving Voltage ◽  
Element Analysis ◽  
Central Deflection ◽  
Large Numbers ◽  
Micro Pump

This study reports the performance of piezo actuated compliant flexure diaphragm for micropump and MEMS application. To achieve the high performance of diaphragm at the low operating voltage compliant flexure diaphragm design is introduced. Very limited work has done on the diaphragms of micropump. Large numbers of mechanical micropumps have used plane diaphragms. The central deflection of diaphragm plays an important role in defining the micropump performance. The flow rate of mechanical type micropump strongly depends on the central deflection of diaphragm. In this paper compliant flexure diaphragms are designed for micropump to achieve higher deflection at lower operating voltage. Finite element analysis of compliant flexure diaphragm with single layer PVDF (Polyvinylidene fluoride) actuator is simulated in COMSOL. Compliant flexure diaphragms with a different number of flexures are analyzed. The central deflection of compliant flexure diaphragms is measured for driving voltages of 90V to 140V in 10 steps. The deflection of the compliant flexure diaphragm mainly depends on flexure width and length, the number of flexures in the diaphragm, PVDF thickness, diaphragm thickness and driving voltage. Use of compliant flexure diaphragm for micropump will reduce the mass and driving voltage of micropump. An attempt is made to compare the results of compliant flexure diaphragms with plane diaphragms. From the experimental results it is noticed that the compliant flexure diaphragm deflection is twice that of the plane diaphragm at same driving voltage. Deflection of three flexure and four flexure compliant diaphragms is 10.5µm and 11.5µm respectively at 140V.  

scholarly journals Piezoelectric Properties of Zinc Oxide/Iron Oxide filled Polyvinylidene fluoride Nanocomposite Fibers

2021 ◽  
Author(s):  
Abdulrahman Mohmmed AlAhzm ◽  
Maan Omar Alejli ◽  
Deepalekshmi Ponnamma ◽  
Yara Elgawady ◽  
Mariam Al Ali Al-Maadeed
Keyword(s):  
Zinc Oxide ◽  
Iron Oxide ◽  
Polyvinylidene Fluoride ◽  
Output Voltage ◽  
Mechanical Energy ◽  
Scanning Calorimetry ◽  
Power Sources ◽  
Hybrid Nanomaterial ◽  
Β Phase ◽  
Nanocomposite Fibers

Abstract Piezoelectric nanogenerators (PENG) with flexible and simple design have pronounced significance in fabricating sustainable devices for self-powering electronics. This study demonstrates the fabrication of electrospun nanocomposite fibers from polyvinylidene fluoride (PVDF) filled Zinc Oxide (ZnO)/Iron Oxide (FeO) nanomaterials. The nanocomposite fiber based flexible PENG showed piezoelectric output voltage of 5.9 V when 3 wt.% of ZnO/FeO hybrid nanomaterial was introduced, which was 29.5 times higher than the neat PVDF. No apparent decline in output voltage was observed for almost 2000 seconds attributed to the outstanding durability. This higher piezoelectric output performance is correlated with the β-phase transformation studies from the Fourier transformation infrared spectroscopy and the crystallinity studies from the differential scanning calorimetry. Both these studies show respective enhancement of 3.79 and 2.16 % in the β-phase crystallinity values of PVDF-ZnO/FeO 3 wt.% composite. Higher dielectric constant value obtained for the same composite (3 times higher than the neat PVDF) confirms the increased energy storage efficiency as well. Thus the proposed soft and flexible PENG is a promising mechanical energy harvester, and its good dielectric properties reveals the ability to use this material as good power sources for wearable and flexible electronic devices.

Stochastic models in cell kinetics

1988 ◽  
Vol 25 (A) ◽  
pp. 91-111
Author(s):  
Peter J. Brockwell
Keyword(s):  
Life Cycle ◽  
Stochastic Models ◽  
Death Rate ◽  
Cell Kinetics ◽  
Branching Processes ◽  
Experimental Studies ◽  
Renewal Theory ◽  
Biological Cell ◽  
Age Dependent

We discuss the role of stochastic processes in modelling the life-cycle of a biological cell and the growth of cell populations. Results for multiphase age-dependent branching processes have proved invaluable for the interpretation of many of the basic experimental studies of the life-cycle. Moreover problems from cell kinetics, in particular those related to diurnal rhythm in cell-growth, have stimulated research into ‘periodic' renewal theory, and the asymptotic behaviour of populations of cells with periodic death rate.

Experimental Studies on CO2 Absorption in Immersed Hollow Fiber Membrane Contactor

2012 ◽  
Vol 209-211 ◽  
pp. 1571-1575 ◽  
Author(s):  
Xiao Na Wu ◽  
Liang Wang ◽  
Zhao Hui Zhang ◽  
Wen Yang Li ◽  
Xing Fei Guo
Keyword(s):  
Removal Efficiency ◽  
Hollow Fiber ◽  
Flue Gas ◽  
Polyvinylidene Fluoride ◽  
Hollow Fiber Membrane ◽  
Experimental Studies ◽  
Operating Mode ◽  
Membrane Performance ◽  
Membrane Flux ◽  
Absorption Performance

Carbon dioxide (CO2) absorption performance from flue gas was investigated using monoethanolamine (MEA) solution in porous hydrophobic polyvinylidene fluoride (PVDF) hollow fiber membranes contactor. The influence of operating parameters on CO2 removal efficiency and flux were studied in the immersion operating mode. The experimental results indicated that the CO2 removal efficiency and flux decreased with the increase of flue gas load and carbonization degrees, but the increase of the absorbent concentration and temperature promoted membrane performance of CO2 capture. An increase of 84 m3•m-2•h-1 in the flue gas load resulted in a 68% decrease in the removal efficiency. Absorbent carbonation degree increased to 0.45 mol CO2•mol-1MEA led to the decrease of active ingredient amounts in the absorption solution, and the corresponding removal efficiency and membrane flux dropped by 50% of the initial amounts, respectively. The increase of concentration and temperature of absorbent also benefited membrane absorption performance of CO2 absorption, so that the concentration and temperature of the solvent increased lead to the CO2 removal efficiency and flux increased.

Sign in / Sign up

Export Citation Format

Share Document