scholarly journals Tensile Properties of Inkjet 3D Printed Parts: Critical Process Parameters and Their Efficient Analysis

2015 ◽  
Author(s):  
Jochen Mueller ◽  
Shi En Kim ◽  
Kristina Shea ◽  
Chiara Daraio
Keyword(s):  
Mechanical Properties ◽  
Expiry Date ◽  
Warm Up ◽  
Whole Process ◽  
Closing The Loop ◽  
3D Printed ◽  
Critical Process Parameters ◽  
Nozzle Blockage ◽  
The One ◽  
And Storage

To design and optimize for capabilities of additive manufacturing processes it is also necessary to understand and model their variations in geometric and mechanical properties. In this paper, such variations of inkjet 3D printed parts are systematically investigated by analyzing parameters of the whole process, i.e. storage of the material, printing, testing, and storage of finished parts. The goal is to both understand the process and determine the parameters that lead to the best mechanical properties and the most accurate geometric properties. Using models based on this understanding, we can design and optimize parts, and fabricate and test them successfully, thus closing the loop. Since AM materials change rapidly and this process will have to be repeated, it is shown how to create a cost and time efficient experimental design with the one-factor-at-a-time and design of experiments methods, yielding high statistical accuracies for both main and interaction effects. The results show that the number of intersections between layers and nozzles along the load-direction has the strongest impact on the mechanical properties followed by the UV exposure time, which is investigated by part spacing, the position on the printing table and the expiry date of the material. Minor effects are found for the storage time and the surface roughness is not affected by any factor. Nozzle blockage, which leads to a smaller flow-rate of printing material, significantly affected the width and waviness of the printed product. Furthermore, the machine’s warm-up time is found to be an important factor.

Influence of clinching steps and sheet thickness on the mechanical properties of the clinching joint

2021 ◽  
pp. 095440542110010
Author(s):  
Chao Chen ◽  
Huiyang Zhang ◽  
Hao Peng ◽  
Xiangkun Ran
Keyword(s):  
Mechanical Properties ◽  
Energy Absorption ◽  
Sheet Thickness ◽  
Thick Sheet ◽  
Whole Process ◽  
Neck Thickness ◽  
Neck Fracture ◽  
One Step ◽  
The One ◽  
Joining Strength

In order to reduce the protrusion height and increase the strength of the clinched joint, a two-step clinching method was investigated in the present study. The whole process contains two steps. The first step is used to produce one-step clinched joints, and the second step is used to press the one-step clinched joints to reduce the protrusion height and increase the joining strength. The influences of clinching steps and sheet thicknesses on the mechanical properties of the clinched joint were investigated. The main failure mode of all the clinched joints in the strength tests is the neck fracture mode. The neck thickness can be enlarged by the two-step clinching method, and the protrusion height can be reduced. TCJ2.5-2.0 joint has the highest energy absorption and strength, and OCJ2.0-2.5 joint has the lowest energy absorption and strength. The two-step clinching process can contribute to increasing energy absorption and joining strength. For getting higher strength, the thick sheet should be taken as the top sheet. With higher strength and lower protrusion, the use of two-step clinched joint will be convenient in the mechanical engineering areas.

THE ROLE OF ANTHROPONYMS IN THE SEMANTIC FIELD OF ARTISTIC WORKS

2019 ◽  
Vol 2019 (29) ◽  
pp. 66-77
Author(s):  
Lidiya Derbenyova
Keyword(s):  
Literary Work ◽  
Main Theme ◽  
Semantic Field ◽  
New Meanings ◽  
Minor Part ◽  
The One ◽  
A Minor ◽  
And Storage ◽  
Horizon Of Expectations

The article explores the role of antropoetonyms in the reader’s “horizon of expectation” formation. As a kind of “text in the text”, antropoetonyms are concentrating a large amount of information on a minor part of the text, reflecting the main theme of the work. As a “text” this class of poetonyms performs a number of functions: transmission and storage of information, generation of new meanings, the function of “cultural memory”, which explains the readers’ “horizon of expectations”. In analyzing the context of the literary work we should consider the function of antropoetonyms in vertical context (the link between artistic and other texts, and the groundwork system of culture), as well as in the context of the horizontal one (times’ connection realized in the communication chain from the word to the text; the author’s intention). In this aspect, the role of antropoetonyms in the structure of the literary text is extremely significant because antropoetonyms convey an associative nature, generating a complex mechanism of allusions. It’s an open fact that they always transmit information about the preceding text and suggest a double decoding. On the one hand, the recipient decodes this information, on the other – accepts this as a sort of hidden, “secret” sense.

Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique

2021 ◽  
pp. 1-18
Author(s):  
N. Vinoth Babu ◽  
N. Venkateshwaran ◽  
N. Rajini ◽  
Sikiru Oluwarotimi Ismail ◽  
Faruq Mohammad ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Quality ◽  
3D Printed

scholarly journals The Influence of Different Plasma Cell Discharges on the Performance Quality of Surgical Gown Samples

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4329
Author(s):  
Atif H. Asghar ◽  
Ahmed Rida Galaly
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Exposure Time ◽  
Electrical Characteristics ◽  
Cathode Fall ◽  
Treatment Efficiency ◽  
Performance Quality ◽  
Surgical Gown ◽  
The One

An experimental study was performed on a low-density plasma discharge using two different configurations of the plasma cell cathode, namely, the one mesh system electrodes (OMSE) and the one mesh and three system electrodes (OMTSE), to determine the electrical characteristics of the plasma such as current–voltage characteristics, breakdown voltage (VB), Paschen curves, current density (J), cathode fall thickness (dc), and electron density of the treated sample. The influence of the electrical characteristics of the plasma fluid in the cathode fall region for different cathode configuration cells (OMSE and OMTSE) on the performance quality of a surgical gown was studied to determine surface modification, treatment efficiency, exposure time, wettability property, and mechanical properties. Over a very short exposure time, the treatment efficiency for the surgical gown surface of plasma over the mesh cathode at a distance equivalent to the cathode fall distance dc values of the OMTSE and for OMSE reached a maximum. The wettability property decreased from 90 to 40% for OMTSE over a 180 s exposure time and decreased from 90 to 10% for OMSE over a 160 s exposure time. The mechanisms of each stage of surgical gown treatment by plasma are described. In this study, the mechanical properties of the untreated and treated surgical gown samples such as the tensile strength and elongation percentage, ultimate tensile strength, yield strength, strain hardening, resilience, toughness, and fracture (breaking) point were studied. Plasma had a more positive effect on the mechanical properties of the OMSE reactor than those of the OMTSE reactor.

scholarly journals Insights into Mechanical Properties of the 1980 Irpinia Fault System from the Analysis of a Seismic Sequence

Geosciences ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Gaetano Festa ◽  
Guido Maria Adinolfi ◽  
Alessandro Caruso ◽  
Simona Colombelli ◽  
Grazia De Landro ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Early Warning Systems ◽  
Fault System ◽  
Minimum Size ◽  
Double Difference ◽  
Warning Systems ◽  
Initiation Mechanism ◽  
Earthquake Early Warning Systems ◽  
The One

Seismic sequences are a powerful tool to locally infer geometrical and mechanical properties of faults and fault systems. In this study, we provided detailed location and characterization of events of the 3–7 July 2020 Irpinia sequence (southern Italy) that occurred at the northern tip of the main segment that ruptured during the 1980 Irpinia earthquake. Using an autocorrelation technique, we detected more than 340 events within the sequence, with local magnitude ranging between −0.5 and 3.0. We thus provided double difference locations, source parameter estimation, and focal mechanisms determination for the largest quality events. We found that the sequence ruptured an asperity with a size of about 800 m, along a fault structure having a strike compatible with the one of the main segments of the 1980 Irpinia earthquake, and a dip of 50–55° at depth of 10.5–12 km and 60–65° at shallower depths (7.5–9 km). Low stress drop release (average of 0.64 MPa) indicates a fluid-driven initiation mechanism of the sequence. We also evaluated the performance of the earthquake early warning systems running in real-time during the sequence, retrieving a minimum size for the blind zone in the area of about 15 km.

scholarly journals Fabrication of Polycaprolactone/Nano Hydroxyapatite (PCL/nHA) 3D Scaffold with Enhanced In Vitro Cell Response via Design for Additive Manufacturing (DfAM)

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1394
Author(s):  
Yong Sang Cho ◽  
So-Jung Gwak ◽  
Young-Sam Cho
Keyword(s):  
Mechanical Properties ◽  
Cell Response ◽  
Structural Characteristics ◽  
Structure Design ◽  
Compressive Modulus ◽  
Control Group ◽  
Design For Additive Manufacturing ◽  
3D Scaffold ◽  
3D Printed

In this study, we investigated the dual-pore kagome-structure design of a 3D-printed scaffold with enhanced in vitro cell response and compared the mechanical properties with 3D-printed scaffolds with conventional or offset patterns. The compressive modulus of the 3D-printed scaffold with the proposed design was found to resemble that of the 3D-printed scaffold with a conventional pattern at similar pore sizes despite higher porosity. Furthermore, the compressive modulus of the proposed scaffold surpassed that of the 3D-printed scaffold with conventional and offset patterns at similar porosities owing to the structural characteristics of the kagome structure. Regarding the in vitro cell response, cell adhesion, cell growth, and ALP concentration of the proposed scaffold for 14 days was superior to those of the control group scaffolds. Consequently, we found that the mechanical properties and in vitro cell response of the 3D-printed scaffold could be improved by kagome and dual-pore structures through DfAM. Moreover, we revealed that the dual-pore structure is effective for the in vitro cell response compared to the structures possessing conventional and offset patterns.

Physical property of 3D-printed sinusoidal pattern using shape memory TPU filament

2020 ◽  
Vol 90 (21-22) ◽  
pp. 2399-2410 ◽  
Author(s):  
Shahbaj Kabir ◽  
Hyelim Kim ◽  
Sunhee Lee
Keyword(s):  
Mechanical Properties ◽  
Tensile Test ◽  
Shape Memory ◽  
Fused Deposition Modeling ◽  
Loss Modulus ◽  
Thermoplastic Polyurethane ◽  
Heating Process ◽  
Fused Deposition ◽  
3D Printed ◽  
Sinusoidal Pattern

This study has investigated the physical properties of 3D-printable shape memory thermoplastic polyurethane (SMTPU) filament and its 3D-printed sinusoidal pattern obtained by fused deposition modeling (FDM) technology. To investigate 3D filaments, thermoplastic polyurethane (TPU) and SMTPU filament were examined by conducting infrared spectroscopy, x-ray diffraction (XRD), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and a tensile test. Then, to examine the 3D-printed sinusoidal samples, a sinusoidal pattern was developed and 3D-printed. Those samples went through a three-step heating process: (a) untreated state; (b) 5 min heating at 70°C, cooling for 30 min at room temperature; and (c) a repeat of step 2. The results obtained by the three different heating processes of the 3D-printed sinusoidal samples were examined by XRD, DMTA, DSC and the tensile test to obtain the effect of heating or annealing on the structural and mechanical properties. The results show significant changes in structure, crystallinity and thermal and mechanical properties of SMTPU 3D-printed samples due to the heating steps. XRD showed the increase in crystallinity with heating. In DMTA, storage modulus, loss modulus and the tan σ peak position also changed for various heating steps. The DSC result showed that the Tg for different steps of the SMTPU 3D-printed sample remained almost the same at around 51°C. The tensile property of the TPU 3D-printed sinusoidal sample decreased in terms of both load and elongation with increased heating processes, while for the SMTPU 3D-printed sinusoidal sample, the load decreased but elongation increased about 2.5 times.

Sign in / Sign up

Export Citation Format

Share Document