Multifrequency Excitation of a Clamped-Clamped Microbeam

2015 ◽  
Author(s):  
Nizar R. Jaber ◽  
Abdallah Ramini ◽  
Mohammad Younis
Keyword(s):  
Natural Frequencies ◽  
Harmonic Excitation ◽  
Mode Shapes ◽  
Order Model ◽  
Reduced Order ◽  
Axial Forces ◽  
Electrically Actuated ◽  
Experimental Values ◽  
Good Agreement ◽  
Structural Layer

We present analytical and experimental investigation of an electrically actuated clamped-clamped microbeam under a two-source harmonic excitation. The first frequency is swept around the first mode of vibration where the second one is fixed. These microbeams are fabricated using polyimide as structural layer coated with nickel form top and chromium and gold layers from bottom. We demonstrate the excitation of additive and subtractive type resonance. We show that by properly tuning the frequency and the amplitude of the excitation force, the frequency bandwidth of the resonator is increased. Theoretically, we solved the eigenvalue problem for different axial forces to find the natural frequencies ratio that match the experimental values. Using Galerkin method, a reduced order model is derived to simulate the static and dynamic response of the device where using three symmetric mode shapes provided a good agreement with experimental data.

Accuracies of Reduced Order Models of a Bladed Rotor With Geometric Mistuning

2013 ◽  
Vol 136 (7) ◽  
Author(s):  
Yasharth Bhartiya ◽  
Alok Sinha
Keyword(s):  
Natural Frequencies ◽  
Domain Analysis ◽  
Forced Response ◽  
Reduced Order Model ◽  
Mode Shapes ◽  
Reduced Order Models ◽  
Order Model ◽  
Reduced Order ◽  
Model Based ◽  
Bladed Rotor

The results from a reduced order model based on frequency mistuning are compared with those from recently developed modified modal domain analysis (MMDA). For the academic bladed rotor considered in this paper, the frequency mistuning analysis is unable to capture the effects of geometric mistuning, whereas MMDA provides accurate estimates of natural frequencies, mode shapes, and forced response.

A Reduced-Order Model for Evaluating the Effect of Rotational Speed on the Natural Frequencies and Mode Shapes of Blades

2003 ◽  
Vol 125 (3) ◽  
pp. 772-776 ◽  
Author(s):  
P. Marugabandhu ◽  
J. H. Griffin
Keyword(s):  
Finite Element ◽  
Natural Frequencies ◽  
Reduced Order Model ◽  
Mode Shapes ◽  
Finite Element Analyses ◽  
Order Model ◽  
Reduced Order ◽  
Low Aspect Ratio ◽  
Centrifugal Stiffening ◽  
Fan Blade

A reduced-order model has been developed that can be used to accurately and quickly calculate the changes in the natural frequencies and mode shapes of a blade that are caused by centrifugal stiffening. It has been corroborated by comparisons with finite element analyses of a cantilevered tapered plate and with frequencies from a low aspect ratio fan blade.

A Reduced Order Model for Evaluating the Effect of Rotational Speed on the Natural Frequencies and Mode Shapes of Blades

2000 ◽  
Author(s):  
P. Marugabandhu ◽  
J. H. Griffin
Keyword(s):  
Finite Element ◽  
Natural Frequencies ◽  
Reduced Order Model ◽  
Mode Shapes ◽  
Finite Element Analyses ◽  
Order Model ◽  
Reduced Order ◽  
Low Aspect Ratio ◽  
Centrifugal Stiffening ◽  
Fan Blade

A reduced order model has been developed that can be used to accurately and quickly calculate the changes in the natural frequencies and mode shapes of a blade that are caused by centrifugal stiffening. It has been corroborated by comparisons with finite element analyses of a cantilevered tapered plate and with frequencies from a low aspect ratio fan blade.

Natural Frequencies and Mode Shapes of Slacked Carbon Nanotube NEMS Resonators

2010 ◽  
Author(s):  
Hassen M. Ouakad ◽  
Mohammed I. Younis
Keyword(s):  
Natural Frequencies ◽  
Electrostatic Force ◽  
Static Solution ◽  
Reduced Order Model ◽  
Mode Shapes ◽  
Physical Parameters ◽  
Beam Model ◽  
Order Model ◽  
Research Attention ◽  
Reduced Order

Estimating accurately the natural frequencies of electrically actuated carbon nanotubes (CNTs) has been the center of research attention over the past few years. Despite this important topic, a robust knowledge is still missing to understand the role of various physical parameters that affect the natural frequencies, such as the stretching of doubly-clamped CNTs, the DC electrostatic force, and the curvature of CNTs with slacks. In this investigation, we use a 2D nonlinear curved beam model (arch) to simulate the coupled in-plane and the out-of-plane motions of a CNT with curvature (slack). We calculate the variation of its natural frequencies and mode-shapes with the level of slack and the DC electrostatic load. Toward this, we derive a reduced-order model using a multi-mode Galerkin procedure based on the mode shapes of the straight unactuated CNT. We calculate the natural frequencies of the slacked CNT for a given voltage by substituting the static solution into the Jacobian of the reduced-order-model and then finding the corresponding eigenvalues. We show various scenarios of mode crossing and mode veering as the levels of slack and DC load are varied.

Tire Vibrations

1977 ◽  
Vol 5 (4) ◽  
pp. 202-225 ◽  
Author(s):  
G. R. Potts ◽  
C. A. Bell ◽  
L. T. Charek ◽  
T. K. Roy
Keyword(s):  
Natural Frequencies ◽  
Standing Waves ◽  
Resonant Mode ◽  
Mode Shapes ◽  
Resonant Vibrations ◽  
Resonant Frequencies ◽  
Radial Tire ◽  
Analysis Techniques ◽  
Thin Ring ◽  
Good Agreement

Abstract Natural frequencies and vibrating motions are determined in terms of the material and geometric properties of a radial tire modeled as a thin ring on an elastic foundation. Experimental checks of resonant frequencies show good agreement. Forced vibration solutions obtained are shown to consist of a superposition of resonant vibrations, each rotating around the tire at a rate depending on the mode number and the tire rotational speed. Theoretical rolling speeds that are upper bounds at which standing waves occur are determined and checked experimentally. Digital Fourier transform, transfer function, and modal analysis techniques used to determine the resonant mode shapes of a radial tire reveal that antiresonances are the primary transmitters of vibration to the tire axle.

Dynamic model for high-speed rotors based on their experimental characterization

2017 ◽  
Vol 2 (4) ◽  
pp. 25
Author(s):  
L. A. Montoya ◽  
E. E. Rodríguez ◽  
H. J. Zúñiga ◽  
I. Mejía
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Experimental Characterization ◽  
Rotating Systems ◽  
Computing Performance ◽  
The Impact ◽  
Stiffness Distribution ◽  
Good Agreement

Rotating systems components such as rotors, have dynamic characteristics that are of great importance to understand because they may cause failure of turbomachinery. Therefore, it is required to study a dynamic model to predict some vibration characteristics, in this case, the natural frequencies and mode shapes (both of free vibration) of a centrifugal compressor shaft. The peculiarity of the dynamic model proposed is that using frequency and displacements values obtained experimentally, it is possible to calculate the mass and stiffness distribution of the shaft, and then use these values to estimate the theoretical modal parameters. The natural frequencies and mode shapes of the shaft were obtained with experimental modal analysis by using the impact test. The results predicted by the model are in good agreement with the experimental test. The model is also flexible with other geometries and has a great time and computing performance, which can be evaluated with respect to other commercial software in the future.

Fluid Added Mass Effect in the Modal Response of a Pump-Turbine Impeller

2009 ◽  
Author(s):  
Eduard Egusquiza ◽  
Carme Valero ◽  
Quanwei Liang ◽  
Miguel Coussirat ◽  
Ulrich Seidel
Keyword(s):  
Natural Frequencies ◽  
Experimental Tests ◽  
Mass Effect ◽  
Added Mass ◽  
Mode Shapes ◽  
Pump Turbine ◽  
Modal Response ◽  
Surrounding Fluid ◽  
Turbine Impeller ◽  
Good Agreement

In this paper, the reduction in the natural frequencies of a pump-turbine impeller prototype when submerged in water has been investigated. The impeller, with a diameter of 2.870m belongs to a pump-turbine unit with a power of around 100MW. To analyze the influence of the added mass, both experimental tests and numerical simulations have been carried out. The experiment has been performed in air and in water. From the frequency response functions the modal characteristics such as natural frequencies and mode shapes have been obtained. A numerical simulation using FEM (Finite Elements Model) was done using the same boundary conditions as in the experiment (impeller in air and surrounded by a mass of water). The modal behaviour has also been calculated. The numerical results were compared with the available experimental results. The comparison shows a good agreement in the natural frequency values both in air and in water. The reduction in frequency due to the added mass effect of surrounding fluid has been calculated. The physics of this phenomenon due to the fluid structure interaction has been investigated from the analysis of the mode-shapes.

Modal Reduced Order Model for Vision Sensing of IPMC Actuator

2006 ◽  
Vol 326-328 ◽  
pp. 1523-1526
Author(s):  
Il Kweon Oh ◽  
Seong Won Yeom ◽  
Dong Weon Lee
Keyword(s):  
Reduced Order Model ◽  
Mode Shapes ◽  
Computational Time ◽  
Transverse Displacement ◽  
Metal Composite ◽  
Motion Generation ◽  
Order Model ◽  
Lower Mode ◽  
Reduced Order ◽  
Vision Sensing

In order to control the IPMC (Ionic Polymer Metal Composite) actuators, it is necessary to use a vision sensing system and a reduced order model from the vision sensing data. In this study, the MROVS (Modal Reduced Order Vision Sensing) model using the least square method has been developed for implementation of the biomimetic motion generation. The simulated transverse displacement is approximated with a sum of the lower mode shapes of the cantilever beam. The NIPXI 1409 image acquisition board and CCD camera (XC-HR50) are used in the experimental setup. Present results show that the MROVS model can efficiently process the vision sensing of the biomimetic IPMC actuator with cost-effective computational time.

Vibrational characteristics of an earth dam

1966 ◽  
Vol 56 (6) ◽  
pp. 1207-1226
Author(s):  
W. O. Keightley
Keyword(s):  
Theoretical Analysis ◽  
Natural Frequencies ◽  
Forced Vibrations ◽  
Earth Dam ◽  
Mode Shapes ◽  
Modal Damping ◽  
Vibrational Characteristics ◽  
Good Agreement ◽  
Lower Frequencies

Abstract An earth dam was excited into vibrations, in the upstream-downstream direction, by four rotating eccentric-mass vibration generators which were operated on the crest. Natural frequencies, mode shapes, and equivalent viscous modal damping constants of the dam were revealed by the forced vibrations. A theoretical analysis of the dam, based on consideration of shearing deformations only, shows moderately good agreement with the behavior which was observed at the lower frequencies.

Sign in / Sign up

Export Citation Format

Share Document