Creativity ‘Misrules’: First Year Engineering Students’ Production and Perception of Creativity in Design Ideas

2015 ◽  
Author(s):  
Colin M. Gray ◽  
Seda Yilmaz ◽  
Shanna Daly ◽  
Colleen M. Seifert ◽  
Richard Gonzalez
Keyword(s):  
Engineering Students ◽  
Idea Generation ◽  
First Year ◽  
Design Problems ◽  
First Year Students ◽  
Design Heuristics ◽  
Minute Period ◽  
Engineering Design Problems ◽  
Present Design ◽  
Relationship Of

We report four cases from a larger study, focusing on participants’ self-identified “most creative” concept in relation to their other concepts. As part of an ideation session, first-year engineering students were asked to create concepts for one of two engineering design problems in an 85-minute period, and were exposed to one of two different forms of fixation. Participants worked as individuals, first using traditional brainstorming techniques and generating as many ideas as possible. Design Heuristics cards were then introduced, and students were asked to generate as many additional concepts as possible. After the activity, participants ranked all of the concepts they generated from most to least creative. Representative cases include a detailed analysis of the concept that each participant rated as “most creative,” idea generation method used, and relative location and relationship of the concept to other concepts generated by that participant. Across four cases, we identified a number of characteristic “misrules” or misconceptions, revealing that first-year students judge creativity in their concepts in ways that could inhibit their ability to produce truly novel concepts. We present Design Heuristics as a tool to encourage the exploration of creative concept pathways, empowering students to create more novel concepts by rejecting misrules about creativity.

Comparing Ideation Techniques for Beginning Designers

2016 ◽  
Vol 138 (10) ◽  
Author(s):  
Shanna R. Daly ◽  
Colleen M. Seifert ◽  
Seda Yilmaz ◽  
Richard Gonzalez
Keyword(s):  
Design Problem ◽  
Morphological Analysis ◽  
Engineering Students ◽  
Idea Generation ◽  
First Year ◽  
Concept Generation ◽  
Design Heuristics ◽  
Engineering Design Problem ◽  
Consensual Assessment Technique ◽  
Initial Idea

Concept generation techniques can help to support designers in generating multiple ideas during design tasks. However, differences in the ways these techniques guide idea generation are not well understood. This study investigated the qualities of concepts generated by beginning engineering designers using one of three different idea generation techniques. Working individually on an open-ended engineering design problem, 102 first year engineering students learned and applied one of three different ideation techniques—design heuristics, morphological analysis, or individual brainstorming (using brainstorming rules to generate ideas working alone)—to a given design problem. Using the consensual assessment technique, all concepts were rated for creativity, elaboration, and practicality, and all participants' concept sets were rated for quantity and diversity. The simplest technique, individual brainstorming, led to the most concepts within the short (25 minute) ideation session. All three techniques produced creative concepts averaging near the scale midpoint. The elaboration of the concepts was significantly higher with design heuristics and morphological analysis techniques, and the practicality was significantly higher using design heuristics. Controlling for number of concepts generated, there were no significant differences in diversity of solution sets across groups. These results demonstrate that the use of design heuristics does not limit the creativity of ideation outcomes, and helps students to develop more elaborate and practical ideas. Design heuristics show advantages in the initial idea generation phase for beginning engineering students. These findings point to specific strengths in different ideation techniques, and the value of exposing beginning designers to multiple techniques for idea generation.

REVERSE ENGINEERING: TENSION RATCHET DISSECTION PROJECT

2011 ◽  
Author(s):  
Jeremiah Vanderlaan ◽  
Josh Richert ◽  
James Morrison ◽  
Thomas Doyle
Keyword(s):  
Reverse Engineering ◽  
Engineering Students ◽  
Measurement Techniques ◽  
First Year ◽  
Stepping Stones ◽  
First Year Students ◽  
Final Project ◽  
Undergraduate Study ◽  
Solid Edge ◽  
Part Modeling

We are a group of engineering students, in our first year of undergraduate study. We have been selected from one thousand first year students and have competed and won the PACE competition. All engineers share a common general first year, but we have been accepted into Civil and Mechanical engineering. This project was assigned as the final project in the Design and Graphics course. The project we are tasked with, called the Cornerstone Design Project, is to first dissect a product, discover how it works, dimension each part and create a fully assembled model using CAD software (Solid Edge V20 in our case). As part of discovering how it works we must benchmark it so the device can be compared with competing products. The goal of the project is to develop a full understanding of part modeling and assembly in Solid Edge, learn proper measurement techniques, and learn the process of reverse engineering and product dissection. All of these tasks were stepping stones to help us fully understand how the device, and all its components, work.

scholarly journals What Can Students’ Bibliographies Tell Us?- Evidence Based Information Skills Teaching for Engineering Students

2006 ◽  
Vol 1 (2) ◽  
pp. 12 ◽  
Author(s):  
Fei Yu ◽  
Jan Sullivan ◽  
Leith Woodall
Keyword(s):  
Web Sites ◽  
Engineering Students ◽  
Chemical Engineering ◽  
First Year ◽  
Journal Articles ◽  
First Year Students ◽  
Internet Resources ◽  
Information Skills ◽  
Upper Level ◽  
Department Faculty

Objective - This project sought to identify students’ strengths and weaknesses in locating, retrieving, and citing information in order to deliver information skills workshops more effectively. Methods - Bibliographies submitted from first-year engineering and second- and fourth-year chemical engineering students’ project reports were analysed for the number of items cited, the variety of items cited, and the correct use of citation style. The topics of the project reports were also reviewed to see the relationships between the topics and the items cited. Results - The results show that upper level students cited more items in total than did lower level students in their bibliographies. Second- and fourth-year engineering students cited more books and journal articles than first-year students cited. Web sites were used extensively by all three groups of students, and for some first-year students these were the most frequently used sources. Students from all three groups had difficulties with citation style. Conclusion - There was a clear difference in citation frequency between upper and lower level engineering students. Different strategies of information skills instruction are needed for different levels of students. Librarians and department faculty members need to include good quality Internet resources in their teaching and to change the emphasis from finding information to finding, interpreting, and citing accurately.

Education for sustainable development in Spanish higher education: an assessment of sustainability competencies in engineering and education degrees

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fermín Sánchez-Carracedo ◽  
Daniel Romero-Portillo ◽  
Bàrbara Sureda Carbonell ◽  
Francisco Manuel Moreno-Pino
Keyword(s):  
Sustainable Development ◽  
Engineering Students ◽  
Education For Sustainable Development ◽  
First Year ◽  
Education Students ◽  
First Year Students ◽  
Content Type ◽  
Spanish Higher Education ◽  
Percentage Measure ◽  
University Degree

Purpose This paper aims to present a methodology for analysing the extent to which students of a university degree perceive that they have received a good education for sustainable development (ESD). The methodology enables us to quantify this perception, which, in turn, allows us to determine: to what extent the objectives related to ESD are achieved in the degree, and to compare the learning in ESD perceived by students of different degrees. The methodology is applied to nine engineering degrees and nine education degrees in the Spanish university system. Design/methodology/approach ESD is analysed from the students’ learning perception. This perception is measured by comparing the responses of first- and fourth-year students to a questionnaire about their sustainability competencies. Two indicators have been designed to analyse the results. The first indicator, learning increase, measures the declared learning difference between fourth- and first-year students. The second indicator, learning percentage, measure the amount of learning as reported by fourth-year students compared to how much they could have learned. Findings The results show that the average learning percentage perceived by students is higher in engineering degrees (33%) than in education degrees (27%), despite the fact that the average learning increase declared by students at the end of their studies in both areas of knowledge is similar (66%). Engineering students report having achieved higher learning than education students in all sustainability competencies, with the exception of ethics. Originality/value This paper analyses ESD from the student’s perspective. Furthermore, to the knowledge of the authors, this is the first study that compares the perception of ESD between engineering and education students. This comparison allows us to determine the different approaches that university Professors take to ESD according to the discipline they teach.

CAD Platform Independent Software for Automatic Grading of Technical Drawings

2017 ◽  
Author(s):  
Sanchit Ingale ◽  
Anirudh Srinivasan ◽  
Diana Bairaktarova
Keyword(s):  
Engineering Students ◽  
Spatial Reasoning ◽  
Learning Experience ◽  
Spatial Visualization ◽  
First Year ◽  
Spatial Skills ◽  
First Year Students ◽  
Pedagogical Tool ◽  
Students Success ◽  
Mechanical Objects

Spatial visualization is the ability of an individual to imagine an object mentally and understand its spatial orientation. There have been multiple works proving that spatial visualization skills can be improved with an appropriate training. Such training warrant a critical place in the undergraduate engineering curricula in many engineering schools as spatial skills are considered vital for students’ success in the technical and design fields [1–4]. Enhanced spatial skills help not only professionals in the engineering field but also everyone in the 21st century environment. Drawing sectional views requires mental manipulation and visual thinking. To enhance students spatial reasoning, one of the authors of this study, conducted a class in spatial visualization. The course-learning goal aimed at improving first-year engineering students’ spatial reasoning through instruction on freehand drawings of sectional view. During the semester, two teaching assistants had to grade more than 500 assignments that consisted of sectional views of mechanical objects. This was a tedious and a time consuming task. Motivated by this experience, this paper proposes a software aiming at automating grading of students’ sectional view drawings. The proposed software will also give live feedback to students while they are working on the drawings. This interactive tool aims to 1) improve the learning experience of first year students, with limited CAD knowledge, and 2) introduce a pedagogical tool that can enhance spatial visualization training.

scholarly journals Dynamics of the relationship of emotional intelligence with the results of the state exam during the adaptation of school system to its introduction

2015 ◽  
Vol 8 (2) ◽  
pp. 139-150
Author(s):  
E.S. Dmitrieva ◽  
V.Ya. Gelman
Keyword(s):  
Emotional Intelligence ◽  
School System ◽  
The State ◽  
Russian Language ◽  
Self Report ◽  
First Year ◽  
First Year Students ◽  
Adaptation Processes ◽  
Relationship Of ◽  
The Relationship

Research is devoted to the study of the relationship of emotional intelligence of students with the results of the state exam in the adaptation of the school system for 5 years from the date of introduction. The sample consisted of 156 first-year students. Evaluation of the components of emotional intelligence was measured by self-report (EmIn questionnaire). There was a statistically significant correlation between the severity of different indicators of emotional intelligence of students passing the exam and the results of the three school subjects: Russian language, Mathematics, Social studies. It is shown that since the introduction in 2009 of compulsory exam the level of communication between the indicators of emotional intelligence and the results of the examination has changed. Adaptation processes to the introduction of the state exam lead to changes contingent of successful students: If at the time of the introduction of the exam more successful were students with higher EI, in the process of adaptation more successful became those with lower EI. It was shown that the components of EI, having the most important relationships with the results of the exam, are different for the considered subjects; the dynamics of these relationships has been revealed.

Role of Emotional Intelligence in Academic Achievement

2014 ◽  
pp. 255-263 ◽  
Author(s):  
Tripti Singh ◽  
Manish Kumar Verma ◽  
Rupali Singh
Keyword(s):  
Academic Achievement ◽  
Emotional Intelligence ◽  
Social Intelligence ◽  
Engineering Students ◽  
School Level ◽  
First Year ◽  
First Year Students ◽  
Academic Achievements ◽  
Emotional Intelligence Inventory

The purpose of this study is to see whether there is a relationship between emotional intelligence and academic achievement. The study respondents were B.Tech first year students from the Agra region. Sampling is stratified, making sure that gender, race, socioeconomic status, and abilities are appropriately represented. The respondents are given Emotional Intelligence Inventory (EII–MM), developed by S. K. Mangal and Shubhra Mangal. It consists of 100 items under four scales .The analysis suggests that there is a significant relationship between Emotional Intelligence and Academic Achievement. IQ alone is no more the measure for success; emotional intelligence, social intelligence, and luck also play a big role in a person's success. This study contributes in acknowledging the fact that even engineering students’ academic achievements are attached with Emotional intelligence. Thus, teaching emotional and social skills only at the school level is not sufficient; this can be taught in engineering studies, as well for accomplishing high academic achievements.

Cultivating Students’ Ability of Applying Knowledge in Engineering Design Through Course Project

2011 ◽  
Author(s):  
Jining Qiu ◽  
Bo Zhang ◽  
Huimin Dong ◽  
Yuan Gao
Keyword(s):  
Engineering Design ◽  
Engineering Students ◽  
Mechanical Design ◽  
Gear Train ◽  
Design Problems ◽  
Academic Knowledge ◽  
Multi Stage ◽  
University Of Technology ◽  
Engineering Design Problems ◽  
Wind Power Generator

The ability to solve engineering design problems using academic knowledge flexibly is essential for mechanical engineering students and is also quality that employers look for. This paper introduces how students could explore and experience the process of mechanical design in the course project of Theory of Machines and Mechanisms (TMM) in Dalian University of Technology (DUT) through sharing the design process of accelerator (gear-box) in wind power generator by one representative team of students in the course project. Firstly, design requirements are set based on industrial need and the choosing of the best scheme of multi-stage gear train is conducted. Following that is the design of kinematic parameters of gears and the evaluation of selected system. Then, a possible solution to control the input speed of the generator is proposed. In the end, a survey to 279 students who participate in the course project shows the importance of course project in cultivating their ability to apply knowledge in design.

Sign in / Sign up

Export Citation Format

Share Document